Update help info, it's slightly out of date, and a grammatical fix.
No functional change.
Signed-off-by: Robert P. J. Day <rpjday@xxxxxxxxxxxxxx>
---
are there any other updates that can be made to that help info?
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index cca8394..3f4b452 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -65,15 +65,15 @@ choice
used to setup SDRAM. The internal ROM code then initializes SDRAM
using the register/value table, loads the whole barebox image to
SDRAM and starts it. The internal boot mode is available on newer
- i.MX processors (i.MX25, i.MX35, i.MX51 and i.MX53). and supports
- booting from NOR, NAND, MMC/SD and serial ROMs.
- The external boot mode only supports booting from NAND and NOR. With
+ i.MX processors (i.MX25, i.MX35, i.MX51, i.MX53 and i.MX6), and
+ supports booting from NOR, NAND, MMC/SD and serial ROMs.
+ The external boot mode supports booting only from NAND and NOR. With
NOR flash the image is just started in NOR flash. With NAND flash
the NAND controller loads the first 2kbyte from NAND into the NAND
controllers internal SRAM where it is then started. It's the
responsibility of these 2kbyte to load the rest of the boot image.
The external boot mode is supported on older i.MX processors (i.MX1,
- i.MX21, i.MX25, i.MX27, i.MX21, i.MX35).
+ i.MX21, i.MX25, i.MX27, i.MX31, i.MX35).
config ARCH_IMX_INTERNAL_BOOT
bool "support internal boot mode"
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
