On Mon, 12 Nov 2012, Sascha Hauer wrote:
On Tue, Nov 06, 2012 at 02:49:06PM +0100, Peter Wippich wrote:
Hi,
got the same problem here. Double checked Board Version (8030) and
that I have the right binary (compressed with flash header). After
flashing and reset nothing happens....
I'm back in the office now and realized that we have the 1011
revision in our remotelab. That at least explains why I can't reproduce
this issue. Unfortunately I can't find the 8030 revision anywhere in the
office, I'll wait for my collegue.
In the meantime, could you try removing the call to
imx53_init_lowlevel() and try booting 2nd stage (from U-Boot or
redboot)?
Sascha
Hi Sascha,
bad enough my test board is out for some customer tests. I'll try a second
stage boot as soon as it is back.
Best regards,
Peter
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
| Peter Wippich Voice: +49 30 46776411 |
| G&W Instruments GmbH fax: +49 30 46776419 |
| Gustav-Meyer-Allee 25, Geb. 12 Email: pewi@xxxxxxxxxxxxxxxxx |
| D-13355 Berlin / Germany |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
