On Thu, Nov 08, 2012 at 10:16:40PM +0100, Robert Jarzmik wrote: > The current Y-Modem implementation has some limitations: > - Y-Modem/G protocol is not supported > - Multiple files (aka. batch) transfers are not supported > - Transfer speed over fast lines (USB console) is slow > - Code is not trivial to maintain (personnal opinion) > > This implementation tries to address all these points by > introducing loady2 command. > > The effects are : > - transfer speed for Y-Modem over USB jumps from 2kBytes/s > to 180kBytes/s > - transfer speed for Y-Modem/G jumps to 200kBytes/s > - multiple file transfers are possible > > This command was tested on a USB console and UART 9600bps > serial line : > - NAKs (and retransmissions) were tested for faulty > serial lines > - multiple file transfers were tested > - Y-Modem, Y-Modem/G and X-Modem transfers were tested > > Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx> > Tested-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> Applied, thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
