On 12:21 Sun 28 Oct , Sascha Hauer wrote: > Jean-Christophe, > > On Thu, Oct 25, 2012 at 08:37:11AM +0200, Sascha Hauer wrote: > > On Wed, Oct 24, 2012 at 08:33:59PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote: > > > On 20:06 Wed 24 Oct , Sascha Hauer wrote: > > > > Since we have phylib we have no instance which polls for a link. This > > > > means that network boot often bails out after a powercycle or phy reset. > > > > This changes the link status behaviour to: > > > > > > > > - Always check for a link if the last link test was unsuccesful > > > > - If the last check was succesful, check for a link when the last > > > > check is longer than 5 seconds ago > > > > - Try to get a link for 5 seconds. > > > 5 seconds is too long > > > > > > and check the link is wrong you need to check the autoneg > > > the link may be down because no cable > > > > > > Here we need to check the autoneg is finished > > > and the phy is up > > > > > > so use phy_aneg_done and genphy_config_aneg is for this > > > > phy_aneg_done is not exported and genphy_config_aneg is for phy driver > > use only. > > > > Could you prepare a patch for this? You insisted hard on getting this > > merged in the first place and seem to know what has to be done. > > Will you prepare a patch for this? This is really something I want to > have solved before the next release and right now I do not understand > your proposed solution to this. next week maybe tuesday or wednesday I need to finish some work on at91 for the Atmel kernel release to fix some hw issue The 1-wire support is needed for this Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
