On Wed, Oct 17, 2012 at 04:41:59PM +0530, Madhu koriginja wrote: > Hi All, > Please help me how to flash the ubi image from barebox. > I generated the ubifs image using the mkfs.jffs2, I assume the above is a typo, right? mkfs.jffs2 won't create ubifs images. > then I created the ubi > image using the ubinize. I am trying to flash this ubi image on NAND. > > I tried in two ways > 1) I flashed the UBI image directly on /dev/nand0.rootfs.bb(erased the > partition before flash). This should generally work. > > 2) I executed the below commands from barebox > #erase /dev/nand0.rootfs.bb > #ubiattach /dev/nand0.rootfs > After this command it created the /dev/ubi0 > #ubimkvol /dev/ubi0 rootfs 0 > After this command it created the /dev/ubi0.rootfs This should also work. Do the parameters to mkfs.ubifs/ubinize match your hardware? Some parameters are not really obvious. Also, what hardware are you on? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
