- add dhcp vendor_id - enable glob support (needed by nand) - enable pbl - enable MMU - enable bootm oftree support - enable loadb - enable nfs - use zImage by default Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> --- arch/arm/boards/pm9g45/env/config | 13 ++++++++----- arch/arm/configs/pm9g45_defconfig | 32 ++++++++++++++++++++++++-------- 2 files changed, 32 insertions(+), 13 deletions(-) diff --git a/arch/arm/boards/pm9g45/env/config b/arch/arm/boards/pm9g45/env/config index 5f05e6f..18ac565 100644 --- a/arch/arm/boards/pm9g45/env/config +++ b/arch/arm/boards/pm9g45/env/config @@ -2,7 +2,8 @@ # use 'dhcp' to do dhcp in barebox and in kernel # use 'none' if you want to skip kernel ip autoconfiguration -ip=dhcp +ip=dhcp-barebox +global.dhcp.vendor_id=barebox-pm9g45 # or set your networking parameters here #eth0.ipaddr=a.b.c.d @@ -11,16 +12,18 @@ ip=dhcp #eth0.serverip=a.b.c.d # can be either 'nfs', 'tftp' or 'nand' -kernel_loc=nand +kernel_loc=nfs # can be either 'net', 'nand' or 'initrd' -rootfs_loc=nand +rootfs_loc=net +# can be either 'nfs', 'tftp', 'nand' or empty +oftree_loc=nfs # can be either 'jffs2' or 'ubifs' rootfs_type=ubifs rootfsimage=root.$rootfs_type -#kernelimage=zImage -kernelimage=uImage +kernelimage=zImage +#kernelimage=uImage #kernelimage=Image #kernelimage=Image.lzo diff --git a/arch/arm/configs/pm9g45_defconfig b/arch/arm/configs/pm9g45_defconfig index 331f122..958301d 100644 --- a/arch/arm/configs/pm9g45_defconfig +++ b/arch/arm/configs/pm9g45_defconfig @@ -1,36 +1,52 @@ CONFIG_ARCH_AT91SAM9G45=y CONFIG_MACH_PM9G45=y CONFIG_AEABI=y +# CONFIG_CMD_ARM_CPUINFO is not set +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_PBL_IMAGE=y +CONFIG_MMU=y +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x40000 +CONFIG_MALLOC_TLSF=y CONFIG_LONGHELP=y +CONFIG_GLOB=y +CONFIG_GLOB_SORT=y +CONFIG_HUSH_FANCY_PROMPT=y CONFIG_CMDLINE_EDITING=y CONFIG_AUTO_COMPLETE=y CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9g45/env" -CONFIG_POLLER=y -CONFIG_ENABLE_DEVICE_NOISE=y CONFIG_CMD_EDIT=y CONFIG_CMD_SAVEENV=y CONFIG_CMD_EXPORT=y CONFIG_CMD_PRINTENV=y CONFIG_CMD_READLINE=y +CONFIG_CMD_TFTP=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_BOOTM_SHOW_TYPE=y CONFIG_CMD_BOOTM_VERBOSE=y +CONFIG_CMD_BOOTM_INITRD=y +CONFIG_CMD_BOOTM_OFTREE=y +CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y CONFIG_CMD_UIMAGE=y +# CONFIG_CMD_BOOTU is not set CONFIG_CMD_RESET=y CONFIG_CMD_GO=y CONFIG_CMD_TIMEOUT=y CONFIG_CMD_PARTITION=y CONFIG_NET=y CONFIG_NET_DHCP=y +CONFIG_NET_NFS=y CONFIG_NET_PING=y -CONFIG_CMD_TFTP=y -CONFIG_FS_TFTP=y CONFIG_NET_RESOLV=y CONFIG_DRIVER_NET_MACB=y -CONFIG_DRIVER_SPI_ATMEL=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SST25L=y +# CONFIG_SPI is not set CONFIG_MTD=y +# CONFIG_MTD_OOB_DEVICE is not set CONFIG_NAND=y +# CONFIG_NAND_ECC_HW is not set +# CONFIG_NAND_ECC_HW_SYNDROME is not set +# CONFIG_NAND_ECC_HW_NONE is not set CONFIG_NAND_ATMEL=y CONFIG_UBI=y CONFIG_DISK_ATA=y @@ -40,7 +56,7 @@ CONFIG_USB_OHCI_AT91=y CONFIG_USB_STORAGE=y CONFIG_MCI=y CONFIG_MCI_ATMEL=y -CONFIG_EEPROM_AT25=y +CONFIG_FS_TFTP=y CONFIG_FS_FAT=y CONFIG_FS_FAT_WRITE=y CONFIG_FS_FAT_LFN=y -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
