Hi, On Mon, Oct 15, 2012 at 07:57:09PM +0530, Madhu koriginja wrote: > After barebox up, I erased the /dev/nand0.rootfs.bb using erase command. > kernel is already present in the /dev/nand0.kernel. > After ubiattach command, if I try the boot I am getting the below error. > Actually my aim is to boot the kernel and it should mount to ubifs, to > simplify the problem and reproduce the same I am just trying the boot after > ubiattach instead of preparing the ubi0 device. > Barebox >/ubiattach /dev/nand0.rootfs > UBI: attaching mtd0 to ubi0 > UBI: physical eraseblock size: 1048576 bytes (1024 KiB) > UBI: logical eraseblock size: 1044480 bytes > UBI: smallest flash I/O unit: 4096 > UBI: sub-page size: 1024 > UBI: VID header offset: 1024 (aligned 1024) > UBI: data offset: 4096 > UBI: empty MTD device detected > UBI: create volume table (copy #1) > UBI: create volume table (copy #2) > registering /dev/ubi0 > UBI: attached mtd0 to ubi0 > UBI: MTD device name: "nand0.rootfs" > UBI: MTD device size: 16 MiB > UBI: number of good PEBs: 16 > UBI: number of bad PEBs: 0 > UBI: max. allowed volumes: 128 > UBI: wear-leveling threshold: 4096 > UBI: number of internal volumes: 1 > UBI: number of user volumes: 0 > UBI: available PEBs: 10 > UBI: total number of reserved PEBs: 6 > UBI: number of PEBs reserved for bad PEB handling: 2 > UBI: max/mean erase counter: 1/0 > > Barebox >/ boot > booting kernel of type uimage from /dev/nand0.kernel.bb > bootm /dev/nand0.kernel.bb > requesting xmalloc size: 2456544 > ERROR: out of memory Try a make menuconfig and increase CONFIG_MALLOC_SIZE to whatever you can spare. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox