On 21:12 Sun 14 Oct , Antony Pavlov wrote: > On 14 October 2012 18:11, Jean-Christophe PLAGNIOL-VILLARD> > <plagnioj@xxxxxxxxxxxx> wrote: > >> On 18:09 Wed 10 Oct , Antony Pavlov wrote: > >> This command is based on "mii-diag" and "mii-tool" programs. > >> > >> TODO: > >> * add GbE support (see http://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60-24.2.diff.gz); > >> * add routines to manipulate media-independent interface state. > >> > >> EXAMPLES: > >> > >> barebox:/ miitool /dev/phy0 > >> negotiated 100baseTx-FD, link ok > >> > >> barebox:/ miitool -v /dev/phy0 > >> negotiated 100baseTx-FD, link ok > >> product info: Level One LXT971A rev 2 > >> basic mode: autonegotiation enabled > >> basic status: autonegotiation complete, link ok > >> capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD > >> advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD > >> link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control > >> > >> barebox:/ miitool -vv /dev/phy0 > >> negotiated 100baseTx-FD, link ok > >> registers for MII PHY: > >> 3100 782d 0013 78e2 01e1 45e1 0007 2001 > >> 0000 ffff ffff ffff ffff ffff ffff ffff > >> 0084 4780 0000 0000 0422 0000 0000 0000 > >> 0000 0000 0080 0000 ffff 0000 0000 3660 > >> product info: Level One LXT971A rev 2 > >> basic mode: autonegotiation enabled > >> basic status: autonegotiation complete, link ok > >> capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD > >> advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD > >> link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control > >> > >> Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> > >> --- > >> commands/Kconfig | 11 +++ > >> commands/Makefile | 1 + > >> commands/miitool.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > >> 3 files changed, 280 insertions(+) > >> create mode 100644 commands/miitool.c > >> > >> diff --git a/commands/Kconfig b/commands/Kconfig > >> index e934f29..c8cdd54 100644 > >> --- a/commands/Kconfig > >> +++ b/commands/Kconfig > >> @@ -620,6 +620,17 @@ config CMD_USB > >> help > >> The usb command allows to rescan for USB devices. > >> > >> +config CMD_MIITOOL > >> + bool > >> + prompt "miitool command" > >> + depends on NET > > phylib > > It seems that miitool does not depends on PHYLIB because it uses > abstract file access for reading thranceiver's registers. Moreover it > does not really depends on NET. > On the other hand the situation can be changed in the future. the issue is that you expect a phy which as phylib only Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
