Rather than GPIO_PORT* which will vanish.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/boards/freescale-mx6-sabrelite/board.c | 2 +-
arch/arm/boards/karo-tx25/board.c | 10 +++++-----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c
index 25402d7..cbfa3b4 100644
--- a/arch/arm/boards/freescale-mx6-sabrelite/board.c
+++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c
@@ -200,7 +200,7 @@ static inline int imx6_iim_register_fec_ethaddr(void)
return 0;
}
-static int sabrelite_spi_cs[] = {GPIO_PORTC + 19};
+static int sabrelite_spi_cs[] = {IMX_GPIO_NR(3, 19)};
static struct spi_imx_master sabrelite_spi_0_data = {
.chipselect = sabrelite_spi_cs,
diff --git a/arch/arm/boards/karo-tx25/board.c b/arch/arm/boards/karo-tx25/board.c
index 5413ea8..82d5eb5 100644
--- a/arch/arm/boards/karo-tx25/board.c
+++ b/arch/arm/boards/karo-tx25/board.c
@@ -75,8 +75,8 @@ static iomux_v3_cfg_t karo_tx25_padsd_fec[] = {
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
};
-#define TX25_FEC_PWR_GPIO (GPIO_PORTD | 9)
-#define TX25_FEC_RST_GPIO (GPIO_PORTD | 7)
+#define TX25_FEC_PWR_GPIO IMX_GPIO_NR(4, 9)
+#define TX25_FEC_RST_GPIO IMX_GPIO_NR(4, 7)
static void noinline gpio_fec_active(void)
{
@@ -217,9 +217,9 @@ static struct imx_fb_videomode stk5_fb_mode = {
.pcr = PCR_TFT | PCR_COLOR | PCR_FLMPOL | PCR_LPPOL | PCR_SCLK_SEL,
};
-#define STK5_LCD_BACKLIGHT_GPIO (GPIO_PORTA | 26)
-#define STK5_LCD_RESET_GPIO (GPIO_PORTB | 4)
-#define STK5_LCD_POWER_GPIO (GPIO_PORTB | 5)
+#define STK5_LCD_BACKLIGHT_GPIO IMX_GPIO_NR(1, 26)
+#define STK5_LCD_RESET_GPIO IMX_GPIO_NR(2, 4)
+#define STK5_LCD_POWER_GPIO IMX_GPIO_NR(2, 5)
static void tx25_fb_enable(int enable)
{
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
