Signed-off-by: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
---
drivers/spi/omap3_spi.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index 3008977..bf98092 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -327,10 +327,10 @@ static int omap3_spi_setup(struct spi_device *spi)
{
struct spi_master *master = spi->master;
- if (((master->bus_num == 0) && (spi->chip_select > 3)) ||
- ((master->bus_num == 1) && (spi->chip_select > 1)) ||
+ if (((master->bus_num == 1) && (spi->chip_select > 3)) ||
((master->bus_num == 2) && (spi->chip_select > 1)) ||
- ((master->bus_num == 3) && (spi->chip_select > 0))) {
+ ((master->bus_num == 3) && (spi->chip_select > 1)) ||
+ ((master->bus_num == 4) && (spi->chip_select > 0))) {
printf("SPI error: unsupported chip select %i \
on bus %i\n", spi->chip_select, master->bus_num);
return -EINVAL;
@@ -363,10 +363,10 @@ static int omap3_spi_probe(struct device_d *dev)
/*
* OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
* with different number of chip selects (CS, channels):
- * McSPI1 has 4 CS (bus 0, cs 0 - 3)
- * McSPI2 has 2 CS (bus 1, cs 0 - 1)
- * McSPI3 has 2 CS (bus 2, cs 0 - 1)
- * McSPI4 has 1 CS (bus 3, cs 0)
+ * McSPI1 has 4 CS (bus 1, cs 0 - 3)
+ * McSPI2 has 2 CS (bus 2, cs 0 - 1)
+ * McSPI3 has 2 CS (bus 3, cs 0 - 1)
+ * McSPI4 has 1 CS (bus 4, cs 0)
*
* The board code has to make sure that it does not use
* invalid buses or chip selects.
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
