On Sat, Sep 22, 2012 at 12:12:54PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Adapt phylib from linux
>
> switch all the driver to it
> reimplement mii bus
>
> This will allow to have
> - phy drivers
> - to only connect the phy at then opening of the device
> - if the phy is not ready or not up fail on open
>
> Same behaviour as in linux and will allow to share code and simplify porting.
>
> + * get_phy_id - reads the specified addr for its ID.
> + * @bus: the target MII bus
> + * @addr: PHY address on the MII bus
> + * @phy_id: where to store the ID retrieved.
> + *
> + * Description: Reads the ID registers of the PHY at @addr on the
> + * @bus, stores it in @phy_id and returns zero on success.
> + */
> +int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
> +{
> + int phy_reg;
> +
> + /* Grab the bits from PHYIR1, and put them
> + * in the upper half */
> + phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
> +
> + io (phy_reg < 0)
> + return -EIO;
Which gcc version do you use? Mine doesn't understand 'io'
Please also fix this:
config: ppc pcm030_defconfig
drivers/net/fec_mpc5200.c: In function 'mpc5xxx_fec_probe':
drivers/net/fec_mpc5200.c:683:8: error: 'RMII' undeclared (first use in this function)
drivers/net/fec_mpc5200.c:683:8: note: each undeclared identifier is reported only once for each function it appears in
drivers/net/fec_mpc5200.c:686:8: error: 'RGMII' undeclared (first use inthis function)
make[2]: *** [drivers/net/fec_mpc5200.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [drivers/net] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [drivers] Error 2
make: *** Waiting for unfinished jobs....
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
