On 16:02 Thu 20 Sep , Teresa Gámez wrote:
> Added initial support for Phytec phyCORE-AM335x.
>
> Signed-off-by: Teresa Gámez <t.gamez@xxxxxxxxx>
> ---
> arch/arm/Makefile | 1 +
> arch/arm/boards/pcm051/Makefile | 1 +
> arch/arm/boards/pcm051/board.c | 72 ++++++++++++
> arch/arm/boards/pcm051/config.h | 21 ++++
> arch/arm/boards/pcm051/env/boot/disk | 10 ++
> arch/arm/boards/pcm051/env/init/automount | 32 +++++
> arch/arm/boards/pcm051/env/init/bootargs-base | 9 ++
> arch/arm/boards/pcm051/env/init/general | 15 +++
> arch/arm/boards/pcm051/env/init/hostname | 8 ++
> arch/arm/boards/pcm051/env/network/eth0 | 15 +++
> arch/arm/configs/pcm051_defconfig | 151 +++++++++++++++++++++++++
> arch/arm/mach-omap/Kconfig | 10 ++
> 12 files changed, 345 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/boards/pcm051/Makefile
> create mode 100644 arch/arm/boards/pcm051/board.c
> create mode 100644 arch/arm/boards/pcm051/config.h
> create mode 100644 arch/arm/boards/pcm051/env/boot/disk
> create mode 100644 arch/arm/boards/pcm051/env/init/automount
> create mode 100644 arch/arm/boards/pcm051/env/init/bootargs-base
> create mode 100644 arch/arm/boards/pcm051/env/init/general
> create mode 100644 arch/arm/boards/pcm051/env/init/hostname
> create mode 100644 arch/arm/boards/pcm051/env/network/eth0
> create mode 100644 arch/arm/configs/pcm051_defconfig
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 8e660be..ccb4805 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -108,6 +108,7 @@ board-$(CONFIG_MACH_PCM027) := pcm027
> board-$(CONFIG_MACH_PCM037) := pcm037
> board-$(CONFIG_MACH_PCM038) := pcm038
> board-$(CONFIG_MACH_PCM043) := pcm043
> +board-$(CONFIG_MACH_PCM051) := pcm051
> board-$(CONFIG_MACH_PM9261) := pm9261
> board-$(CONFIG_MACH_PM9263) := pm9263
> board-$(CONFIG_MACH_PM9G45) := pm9g45
> diff --git a/arch/arm/boards/pcm051/Makefile b/arch/arm/boards/pcm051/Makefile
> new file mode 100644
> index 0000000..dcfc293
> --- /dev/null
> +++ b/arch/arm/boards/pcm051/Makefile
> @@ -0,0 +1 @@
> +obj-y += board.o
> diff --git a/arch/arm/boards/pcm051/board.c b/arch/arm/boards/pcm051/board.c
> new file mode 100644
> index 0000000..7cb85f1
> --- /dev/null
> +++ b/arch/arm/boards/pcm051/board.c
> @@ -0,0 +1,72 @@
> +/*
> + * pcm051 - phyCORE-AM335x Board Initalization Code
> + *
> + * Copyright (C) 2012 Teresa Gámez, Phytec Messtechnik GmbH
> + *
> + * Based on arch/arm/boards/omap/board-beagle.c
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <sizes.h>
> +#include <ns16550.h>
> +#include <asm/armlinux.h>
> +#include <generated/mach-types.h>
> +#include <mach/silicon.h>
> +
> +static struct NS16550_plat serial_plat = {
> + .clock = 48000000, /* 48MHz (APLL96/2) */
> + .shift = 2,
> +};
> +
> +/**
> + * @brief UART serial port initialization
> + * arch
> + *
> + * @return result of device registration
> + */
> +static int pcm051_console_init(void)
> +{
> + /* Register the serial port */
> + add_ns16550_device(DEVICE_ID_DYNAMIC, AM33XX_UART0_BASE, 1024,
> + IORESOURCE_MEM_8BIT, &serial_plat);
> +
> + return 0;
> +}
> +console_initcall(pcm051_console_init);
> +
> +static int pcm051_mem_init(void)
> +{
> + arm_add_mem_device("ram0", AM33XX_DRAM_ADDR_SPACE_START, SZ_512M);
> +
> + return 0;
> +}
> +mem_initcall(pcm051_mem_init);
> +
> +static int pcm051_devices_init(void)
> +{
> + add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL,
> + (AM33XX_MMCHS0_BASE + 0x100), SZ_4K,
> + IORESOURCE_MEM, NULL);
> +
> + armlinux_set_bootparams((void *)(AM33XX_DRAM_ADDR_SPACE_START + 0x100));
> + armlinux_set_architecture(MACH_TYPE_PCM051);
> +
> + return 0;
> +}
> +device_initcall(pcm051_devices_init);
> diff --git a/arch/arm/boards/pcm051/config.h b/arch/arm/boards/pcm051/config.h
> new file mode 100644
> index 0000000..8b2b876
> --- /dev/null
> +++ b/arch/arm/boards/pcm051/config.h
> @@ -0,0 +1,21 @@
> +/**
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#endif /* __CONFIG_H */
> diff --git a/arch/arm/boards/pcm051/env/boot/disk b/arch/arm/boards/pcm051/env/boot/disk
> new file mode 100644
> index 0000000..c627991
> --- /dev/null
> +++ b/arch/arm/boards/pcm051/env/boot/disk
> @@ -0,0 +1,10 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "SD Card"
> + exit
> +fi
> +
> +global.bootm.image="/mnt/fat/linuximage"
> +#global.bootm.oftree="/env/oftree"
> +bootargs-root-disk -p mmcblk0p2 -t ext3
> diff --git a/arch/arm/boards/pcm051/env/init/automount b/arch/arm/boards/pcm051/env/init/automount
> new file mode 100644
> index 0000000..644a793
> --- /dev/null
> +++ b/arch/arm/boards/pcm051/env/init/automount
> @@ -0,0 +1,32 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + init-menu-add-entry "$0" "Automountpoints"
> + exit
> +fi
> +
> +# automount server returned from dhcp server
> +
> +#mkdir -p /mnt/tftp-dhcp
> +#automount /mnt/tftp-dhcp 'ifup eth0 && mount $eth0.serverip tftp /mnt/tftp-dhcp'
> +
> +# automount nfs server example
> +
> +#nfshost=somehost
> +#mkdir -p /mnt/${nfshost}
> +#automount /mnt/$nfshost "ifup eth0 && mount ${nfshost}:/tftpboot nfs /mnt/${nfshost}"
> +
> +# static tftp server example
> +
> +#mkdir -p /mnt/tftp
> +#automount -d /mnt/tftp 'ifup eth0 && mount $serverip tftp /mnt/tftp'
> +
> +# FAT on usb disk example
> +
> +#mkdir -p /mnt/fat
> +#automount -d /mnt/fat 'usb && [ -e /dev/disk0.0 ] && mount /dev/disk0.0 /mnt/fat'
> +
> +# FAT on mmc card
> +
> +mkdir -p /mnt/fat
> +automount -d /mnt/fat '[ -e /dev/disk0.0 ] && mount /dev/disk0.0 /mnt/fat'
> diff --git a/arch/arm/boards/pcm051/env/init/bootargs-base b/arch/arm/boards/pcm051/env/init/bootargs-base
> new file mode 100644
> index 0000000..b3139b9
> --- /dev/null
> +++ b/arch/arm/boards/pcm051/env/init/bootargs-base
> @@ -0,0 +1,9 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + init-menu-add-entry "$0" "Base bootargs"
> + exit
> +fi
> +
> +global.linux.bootargs.base="console=ttyO0,115200"
> +bootargs-ip
> diff --git a/arch/arm/boards/pcm051/env/init/general b/arch/arm/boards/pcm051/env/init/general
> new file mode 100644
> index 0000000..743c864
> --- /dev/null
> +++ b/arch/arm/boards/pcm051/env/init/general
> @@ -0,0 +1,15 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + init-menu-add-entry "$0" "general config settings"
> + exit
> +fi
> +
> +# user (used for network filenames)
> +global.user=
> +
> +# timeout in seconds before the default boot entry is started
> +global.autoboot_timeout=3
> +
> +# default boot entry (one of /env/boot/*)
> +global.boot.default=disk
> diff --git a/arch/arm/boards/pcm051/env/init/hostname b/arch/arm/boards/pcm051/env/init/hostname
> new file mode 100644
> index 0000000..3ea1e0a
> --- /dev/null
> +++ b/arch/arm/boards/pcm051/env/init/hostname
> @@ -0,0 +1,8 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + init-menu-add-entry "$0" "hostname"
> + exit
> +fi
> +
> +global.hostname=pcm051
> diff --git a/arch/arm/boards/pcm051/env/network/eth0 b/arch/arm/boards/pcm051/env/network/eth0
> new file mode 100644
> index 0000000..818b9f1
> --- /dev/null
> +++ b/arch/arm/boards/pcm051/env/network/eth0
> @@ -0,0 +1,15 @@
> +#!/bin/sh
> +
> +# ip setting (static/dhcp)
> +ip=dhcp
> +
> +# static setup used if ip=static
> +#ipaddr=
> +#netmask=
> +#gateway=
> +#serverip=
> +
> +# MAC address if needed
> +#ethaddr=xx:xx:xx:xx:xx:xx
> +
> +# put code to discover eth0 (i.e. 'usb') to /env/network/eth0-discover
> diff --git a/arch/arm/configs/pcm051_defconfig b/arch/arm/configs/pcm051_defconfig
> new file mode 100644
> index 0000000..6788e61
> --- /dev/null
> +++ b/arch/arm/configs/pcm051_defconfig
use savedefconfig to generate it
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
