On 17:02 Sat 08 Sep , Sascha Hauer wrote: > On Fri, Sep 07, 2012 at 12:26:06PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote: > > Adapt phylib from linux > > > > switch all the driver to it > > > > This will allow to have phy drivers and to only connect the phy at then > > opening of the device. And if the phy is not ready fail on open. > > > > This is needed by the boot sequence support to do not endup in a loop or spend > > time on bootp when no ethernet cable is connected. > > We do not 'need' this for the above reasons, we could also fix the > current code. The above may be an advantage of your code, but the major > selling point is code sharing with Linux (at least that's what you told > me) yes the major point is to touch the phy only when the ethernet is opening yes the commit is true but it's not the major selling point Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
