On 08:44 Fri 07 Sep , Sascha Hauer wrote:
> On Thu, Sep 06, 2012 at 09:39:31PM +0200, Eric Bénard wrote:
> > since 99e72c8bbdbdc690025a5868d831f1fe79ad56fc on an i.MX51 based board,
> > I get : "phy0: Link is up - 1000/Full". It seems miidev tries to probe
> > the PHY to early and gets 0x3ffff which leads to the wrong capabilities
> > setting.
> >
> > Signed-off-by: Eric Bénard <eric@xxxxxxxxxx>
> > ---
> > drivers/net/miidev.c | 33 +++++++++------------------------
> > 1 files changed, 9 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/net/miidev.c b/drivers/net/miidev.c
> > index 75b53e3..e0f9d67 100644
> > --- a/drivers/net/miidev.c
> > +++ b/drivers/net/miidev.c
> > @@ -131,6 +131,14 @@ int miidev_get_status(struct mii_device *mdev)
> >
> > status = ret & BMSR_LSTATUS ? MIIDEV_STATUS_IS_UP : 0;
> >
> > + if (ret & BMSR_ESTATEN) {
> > + ret = mii_read(mdev, mdev->address, MII_ESTATUS);
> > + if (ret < 0)
> > + goto err_out;
> > + if (ret & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
> > + mdev->capabilities = MIIDEV_CAPABLE_1000M;
> > + }
> > +
> > ret = mii_read(mdev, mdev->address, MII_BMCR);
> > if (ret < 0)
> > goto err_out;
> > @@ -239,27 +247,8 @@ static struct file_operations miidev_ops = {
> > static int miidev_probe(struct device_d *dev)
> > {
> > struct mii_device *mdev = dev->priv;
> > - int val;
> > - int caps = 0;
> >
> > - val = mii_read(mdev, mdev->address, MII_PHYSID1);
> > - if (val < 0 || val == 0xffff)
> > - goto err_out;
> > - val = mii_read(mdev, mdev->address, MII_PHYSID2);
> > - if (val < 0 || val == 0xffff)
> > - goto err_out;
>
> Is the above necessary? This was present before the patch which made the
> regression.
yes the previous patch made a regression
as it expect the mii to be ready at probe vs open before
Best Regards,
J.
>
> Sascha
>
> > - val = mii_read(mdev, mdev->address, MII_BMSR);
> > - if (val < 0)
> > - goto err_out;
> > - if (val & BMSR_ESTATEN) {
> > - val = mii_read(mdev, mdev->address, MII_ESTATUS);
> > - if (val < 0)
> > - goto err_out;
> > - if (val & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
> > - caps = MIIDEV_CAPABLE_1000M;
> > - }
> > -
> > - mdev->capabilities = caps;
> > + mdev->capabilities = 0;
> > mdev->cdev.name = asprintf("phy%d", dev->id);
> > mdev->cdev.size = 64;
> > mdev->cdev.ops = &miidev_ops;
> > @@ -268,10 +257,6 @@ static int miidev_probe(struct device_d *dev)
> > devfs_create(&mdev->cdev);
> > list_add_tail(&mdev->list, &miidev_list);
> > return 0;
> > -
> > -err_out:
> > - dev_err(dev, "cannot read PHY registers (addr %d)\n", mdev->address);
> > - return -ENODEV;
> > }
> >
> > static void miidev_remove(struct device_d *dev)
> > --
> > 1.7.7.6
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/barebox
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
