Re: Problem with loadenv from /dev/env0

[Benoit RAT <benoit@xxxxxxxxxxxxx>]

@alexander:

wrs-02:0B:AD:C0:FF:EE# saveenv 

saving environment

Skipping bad block at 0x00000000

Skipping bad block at 0x00020000

Skipping bad block at 0x00040000

Skipping bad block at 0x00060000

Skipping bad block at 0x00080000

Skipping bad block at 0x000a0000

Skipping bad block at 0x000c0000

then I reboot

read: No error                                                                  

running /env/bin/init...                                                        

not found                

--

 

Benoit RAT LAMY

Engineer (Sw) \ Ingeniero (Sw)

fix. (+34) 958 285 024

cel. (+34) 617 989 123

e-mail: benoit@xxxxxxxxxxxxx

www.sevensols.com / www.sevensecurity.es

_________________________________

C/ Baza, parcela 19 Nave 3  \ Polígono Ind. Juncaril \

18210 - PELIGROS - GRANADA –SPAIN

On Mon, Jun 11, 2012 at 1:59 PM, Benoit RAT <benoit@xxxxxxxxxxxxx> wrote:

Sorry I forgot, 

It is based on pm9g45 board 

--

 

Benoit RAT LAMY

Engineer (Sw) \ Ingeniero (Sw)

fix. (+34) 958 285 024

cel. (+34) 617 989 123

e-mail: benoit@xxxxxxxxxxxxx

www.sevensols.com / www.sevensecurity.es

_________________________________

C/ Baza, parcela 19 Nave 3  \ Polígono Ind. Juncaril \

18210 - PELIGROS - GRANADA –SPAIN

On Mon, Jun 11, 2012 at 1:57 PM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:

On Mon, Jun 11, 2012 at 01:53:13PM +0200, Benoit RAT wrote:
> Hello,
>
> I want to recover some parameters from my NAND flash by using saveenv and
> loadenv but It does not work:
>
> First I have used a big env0 partition to be sure bad blocks don't bother
> me.
>
>  devfs_add_partition("nand0", 0x00000, 0xF0000, PARTITION_FIXED, "env_raw");
> > dev_add_bb_dev("env_raw", "env0");
>
>
> Then I try to edit,save & load /env/config
>
> wrs-02:0B:AD:C0:FF:EE# edit /env/config
>
> Then I change the eth0.addr
>
> eth0.ethaddr=72:0B:AD:C0:FF:EE
> > PS1="wrs-$eth0.ethaddr# "
>
>
> Ctrl+D
>
> wrs-02:0B:AD:C0:FF:EE# . /env/config
> wrs-72:0B:AD:C0:FF:EE# saveenv
> saving environment
> wrs-72:0B:AD:C0:FF:EE# loadenv
> loading environment from /dev/env0
> err -74
> err -74
> wrong crc on env

What hardware was this again?

Sascha

--
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox