From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
We write a proper FCB, but no DBBT since it is unresolved how to keep it
in sync with Linux-based BBTs. Also, we imply searchcount = 4 and stride
= 64 (which is the default) until we can verify via ocotp.
Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
---
arch/arm/mach-mxs/Kconfig | 8 +
arch/arm/mach-mxs/Makefile | 1 +
arch/arm/mach-mxs/bcb.c | 399 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 408 insertions(+)
create mode 100644 arch/arm/mach-mxs/bcb.c
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 3348a3c..fa603fe 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -80,6 +80,14 @@ config MXS_OCOTP
internal view). Don't use register offsets here, the SET, CLR and
TGL registers are not mapped!
+config MXS_CMD_BCB
+ depends on NAND_MXS
+ tristate "Nand bcb command"
+ help
+ To be able to boot from NAND the i.MX23/28 need a Boot Control Block
+ in flash. This option enabled the 'bcb' command which can be used to
+ generate this block during runtime.
+
endmenu
menu "Board specific settings "
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 268e7dc..3539ca4 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_DRIVER_VIDEO_STM) += imx_lcd_clk.o
obj-$(CONFIG_ARCH_IMX23) += speed-imx23.o clocksource-imx23.o usb.o
obj-$(CONFIG_ARCH_IMX28) += speed-imx28.o clocksource-imx28.o
obj-$(CONFIG_MXS_OCOTP) += ocotp.o
+obj-$(CONFIG_MXS_CMD_BCB) += bcb.o
diff --git a/arch/arm/mach-mxs/bcb.c b/arch/arm/mach-mxs/bcb.c
new file mode 100644
index 0000000..d0a3ddc
--- /dev/null
+++ b/arch/arm/mach-mxs/bcb.c
@@ -0,0 +1,399 @@
+/*
+ * (C) Copyright 2011 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Based on a similar function in Karo Electronics TX28-U-Boot (flash.c).
+ * Probably written by Lothar Waßmann (like tx28.c).
+ */
+
+#include <common.h>
+#include <command.h>
+#include <environment.h>
+#include <malloc.h>
+#include <nand.h>
+#include <sizes.h>
+#include <errno.h>
+#include <io.h>
+
+#include <mach/imx-regs.h>
+
+#include <linux/err.h>
+#include <linux/mtd/nand.h>
+
+#define FCB_START_BLOCK 0
+#define NUM_FCB_BLOCKS 1
+#define MAX_FCB_BLOCKS 32768
+
+#define GPMI_TIMING0 0x00000070
+#define GPMI_TIMING0_ADDRESS_SETUP_MASK (0xff << 16)
+#define GPMI_TIMING0_ADDRESS_SETUP_OFFSET 16
+#define GPMI_TIMING0_DATA_HOLD_MASK (0xff << 8)
+#define GPMI_TIMING0_DATA_HOLD_OFFSET 8
+#define GPMI_TIMING0_DATA_SETUP_MASK 0xff
+#define GPMI_TIMING0_DATA_SETUP_OFFSET 0
+
+#define GPMI_TIMING1 0x00000080
+
+#define BCH_MODE 0x00000020
+
+#define BCH_FLASH0LAYOUT0 0x00000080
+#define BCH_FLASHLAYOUT0_NBLOCKS_MASK (0xff << 24)
+#define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24
+#define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16)
+#define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT0_ECC0_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT0_ECC0_OFFSET 12
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_OFFSET 0
+
+#define BCH_FLASH0LAYOUT1 0x00000090
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16)
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT1_ECCN_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT1_ECCN_OFFSET 12
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_OFFSET 0
+
+struct mx28_nand_timing {
+ u8 data_setup;
+ u8 data_hold;
+ u8 address_setup;
+ u8 dsample_time;
+ u8 nand_timing_state;
+ u8 tREA;
+ u8 tRLOH;
+ u8 tRHOH;
+};
+
+struct mx28_fcb {
+ u32 checksum;
+ u32 fingerprint;
+ u32 version;
+ struct mx28_nand_timing timing;
+ u32 page_data_size;
+ u32 total_page_size;
+ u32 sectors_per_block;
+ u32 number_of_nands; /* not used by ROM code */
+ u32 total_internal_die; /* not used by ROM code */
+ u32 cell_type; /* not used by ROM code */
+ u32 ecc_blockn_type;
+ u32 ecc_block0_size;
+ u32 ecc_blockn_size;
+ u32 ecc_block0_type;
+ u32 metadata_size;
+ u32 ecc_blocks_per_page;
+ u32 rsrvd[6]; /* not used by ROM code */
+ u32 bch_mode;
+ u32 boot_patch;
+ u32 patch_sectors;
+ u32 fw1_start_page;
+ u32 fw2_start_page;
+ u32 fw1_sectors;
+ u32 fw2_sectors;
+ u32 dbbt_search_area;
+ u32 bb_mark_byte;
+ u32 bb_mark_startbit;
+ u32 bb_mark_phys_offset;
+};
+
+struct mx28_dbbt_header {
+ u32 checksum;
+ u32 fingerprint;
+ u32 version;
+ u32 number_bb;
+ u32 number_pages;
+ u8 spare[492];
+};
+
+struct mx28_dbbt {
+ u32 nand_number;
+ u32 number_bb;
+ u32 bb_num[2040 / 4];
+};
+
+#define BF_VAL(v, bf) (((v) & bf##_MASK) >> bf##_OFFSET)
+#define GETBIT(v,n) (((v) >> (n)) & 0x1)
+
+static u8 calculate_parity_13_8(u8 d)
+{
+ u8 p = 0;
+
+ p |= (GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 3) ^ GETBIT(d, 2)) << 0;
+ p |= (GETBIT(d, 7) ^ GETBIT(d, 5) ^ GETBIT(d, 4) ^ GETBIT(d, 2) ^ GETBIT(d, 1)) << 1;
+ p |= (GETBIT(d, 7) ^ GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 1) ^ GETBIT(d, 0)) << 2;
+ p |= (GETBIT(d, 7) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 0)) << 3;
+ p |= (GETBIT(d, 6) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 2) ^ GETBIT(d, 1) ^ GETBIT(d, 0)) << 4;
+ return p;
+}
+
+static void encode_hamming_13_8(void *_src, void *_ecc, size_t size)
+{
+ int i;
+ u8 *src = _src;
+ u8 *ecc = _ecc;
+
+ for (i = 0; i < size; i++)
+ ecc[i] = calculate_parity_13_8(src[i]);
+}
+
+static u32 calc_chksum(void *buf, size_t size)
+{
+ u32 chksum = 0;
+ u8 *bp = buf;
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ chksum += bp[i];
+
+ return ~chksum;
+}
+
+/*
+ Physical organisation of data in NAND flash:
+ metadata
+ payload chunk 0 (may be empty)
+ ecc for metadata + payload chunk 0
+ payload chunk 1
+ ecc for payload chunk 1
+...
+ payload chunk n
+ ecc for payload chunk n
+ */
+
+static int calc_bb_offset(struct mtd_info *mtd, struct mx28_fcb *fcb)
+{
+ int bb_mark_offset;
+ int chunk_data_size = fcb->ecc_blockn_size * 8;
+ int chunk_ecc_size = (fcb->ecc_blockn_type << 1) * 13;
+ int chunk_total_size = chunk_data_size + chunk_ecc_size;
+ int bb_mark_chunk, bb_mark_chunk_offs;
+
+ bb_mark_offset = (mtd->writesize - fcb->metadata_size) * 8;
+ if (fcb->ecc_block0_size == 0)
+ bb_mark_offset -= (fcb->ecc_block0_type << 1) * 13;
+
+ bb_mark_chunk = bb_mark_offset / chunk_total_size;
+ bb_mark_chunk_offs = bb_mark_offset - (bb_mark_chunk * chunk_total_size);
+ if (bb_mark_chunk_offs > chunk_data_size) {
+ printf("Unsupported ECC layout; BB mark resides in ECC data: %u\n",
+ bb_mark_chunk_offs);
+ return -EINVAL;
+ }
+ bb_mark_offset -= bb_mark_chunk * chunk_ecc_size;
+ return bb_mark_offset;
+}
+
+static struct mx28_fcb *create_fcb(struct mtd_info *mtd, void *buf, unsigned fw1_start_block,
+ size_t fw_size, unsigned fw2_start_block)
+{
+ u32 fl0, fl1, t0;
+ int metadata_size;
+ int bb_mark_bit_offs;
+ struct mx28_fcb *fcb;
+ int fcb_offs;
+ void __iomem *bch_regs = (void *)MXS_BCH_BASE;
+ void __iomem *gpmi_regs = (void *)MXS_GPMI_BASE;
+
+ fl0 = readl(bch_regs + BCH_FLASH0LAYOUT0);
+ fl1 = readl(bch_regs + BCH_FLASH0LAYOUT1);
+ t0 = readl(gpmi_regs + GPMI_TIMING0);
+ metadata_size = BF_VAL(fl0, BCH_FLASHLAYOUT0_META_SIZE);
+
+ fcb = buf + ALIGN(metadata_size, 4);
+ fcb_offs = (void *)fcb - buf;
+
+ memset(buf, 0x00, fcb_offs);
+ memset(fcb, 0x00, sizeof(*fcb));
+ memset(fcb + 1, 0xff, mtd->erasesize - fcb_offs - sizeof(*fcb));
+
+ strncpy((char *)&fcb->fingerprint, "FCB ", 4);
+ fcb->version = cpu_to_be32(1);
+
+ fcb->timing.data_setup = BF_VAL(t0, GPMI_TIMING0_DATA_SETUP);
+ fcb->timing.data_hold = BF_VAL(t0, GPMI_TIMING0_DATA_HOLD);
+ fcb->timing.address_setup = BF_VAL(t0, GPMI_TIMING0_ADDRESS_SETUP);
+
+ fcb->page_data_size = mtd->writesize;
+ fcb->total_page_size = mtd->writesize + mtd->oobsize;
+ fcb->sectors_per_block = mtd->erasesize / mtd->writesize;
+
+ fcb->ecc_block0_type = BF_VAL(fl0, BCH_FLASHLAYOUT0_ECC0);
+ fcb->ecc_block0_size = BF_VAL(fl0, BCH_FLASHLAYOUT0_DATA0_SIZE);
+ fcb->ecc_blockn_type = BF_VAL(fl1, BCH_FLASHLAYOUT1_ECCN);
+ fcb->ecc_blockn_size = BF_VAL(fl1, BCH_FLASHLAYOUT1_DATAN_SIZE);
+
+ fcb->metadata_size = BF_VAL(fl0, BCH_FLASHLAYOUT0_META_SIZE);
+ fcb->ecc_blocks_per_page = BF_VAL(fl0, BCH_FLASHLAYOUT0_NBLOCKS);
+ fcb->bch_mode = readl(bch_regs + BCH_MODE);
+/*
+ fcb->boot_patch = 0;
+ fcb->patch_sectors = 0;
+*/
+ fcb->fw1_start_page = fw1_start_block / mtd->writesize;
+ fcb->fw1_sectors = DIV_ROUND_UP(fw_size, mtd->writesize);
+
+ if (fw2_start_block != 0 && fw2_start_block < mtd->size / mtd->erasesize) {
+ fcb->fw2_start_page = fw2_start_block / mtd->writesize;
+ fcb->fw2_sectors = fcb->fw1_sectors;
+ }
+
+ fcb->dbbt_search_area = 1;
+
+ bb_mark_bit_offs = calc_bb_offset(mtd, fcb);
+ if (bb_mark_bit_offs < 0)
+ return ERR_PTR(bb_mark_bit_offs);
+ fcb->bb_mark_byte = bb_mark_bit_offs / 8;
+ fcb->bb_mark_startbit = bb_mark_bit_offs % 8;
+ fcb->bb_mark_phys_offset = mtd->writesize;
+
+ fcb->checksum = calc_chksum(&fcb->fingerprint, 512 - 4);
+ return fcb;
+}
+
+static int find_fcb(struct mtd_info *mtd, void *ref, int page)
+{
+ int ret = 0;
+ struct nand_chip *chip = mtd->priv;
+ void *buf = malloc(mtd->erasesize);
+
+ if (buf == NULL)
+ return -ENOMEM;
+
+ chip->select_chip(mtd, 0);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+ ret = chip->ecc.read_page_raw(mtd, chip, buf);
+ if (ret) {
+ printf("Failed to read FCB from page %u: %d\n", page, ret);
+ return ret;
+ }
+ chip->select_chip(mtd, -1);
+ if (memcmp(buf, ref, mtd->writesize) == 0) {
+ printf("%s: Found FCB in page %u (%08x)\n", __func__,
+ page, page * mtd->writesize);
+ ret = 1;
+ }
+ free(buf);
+ return ret;
+}
+
+static int write_fcb(struct mtd_info *mtd, void *buf, int block)
+{
+ int ret;
+ struct nand_chip *chip = mtd->priv;
+ int page = block / mtd->writesize;
+ struct erase_info erase_opts = {
+ .mtd = mtd,
+ .addr = block,
+ .len = mtd->erasesize,
+ .callback = NULL,
+ };
+
+ ret = find_fcb(mtd, buf, page);
+ if (ret > 0) {
+ printf("FCB at block %08x is up to date\n", block);
+ return 0;
+ }
+
+ ret = mtd->erase(mtd, &erase_opts);
+ if (ret) {
+ printf("Failed to erase FCB block %08x\n", block);
+ return ret;
+ }
+
+ printf("Writing FCB to block %08x\n", block);
+ chip->select_chip(mtd, 0);
+ ret = chip->write_page(mtd, chip, buf, page, 0, 1);
+ if (ret) {
+ printf("Failed to write FCB to block %08x: %d\n", block, ret);
+ }
+ chip->select_chip(mtd, -1);
+ return ret;
+}
+
+int update_bcb(int argc, char *argv[])
+{
+ int ret;
+ int block;
+ void *buf;
+ struct mx28_fcb *fcb;
+ struct cdev *tmp_cdev, *bcb_cdev, *firmware_cdev;
+ unsigned long fw2_offset = 0;
+ struct mtd_info *mtd;
+ unsigned fcb_written = 0;
+
+ if (argc == 1)
+ return COMMAND_ERROR_USAGE;
+
+ tmp_cdev = cdev_by_name("nand0");
+ if (!tmp_cdev || !tmp_cdev->mtd) {
+ pr_err("%s: No NAND device!\n", __func__);
+ return -ENODEV;
+ }
+
+ mtd = tmp_cdev->mtd;
+
+ bcb_cdev = cdev_by_name("nand0.bcb");
+ if (!bcb_cdev) {
+ pr_err("%s: No FCB device!\n", __func__);
+ return -ENODEV;
+ }
+
+ firmware_cdev = cdev_by_name(argv[1]);
+ if (!firmware_cdev) {
+ pr_err("%s: Bootstream-Image not found!\n", __func__);
+ return -ENODEV;
+ }
+
+ if (argc > 2) {
+ tmp_cdev = cdev_by_name(argv[2]);
+ if (!tmp_cdev) {
+ pr_err("%s: Redundant Bootstream-Image not found!\n", __func__);
+ return -ENODEV;
+ }
+ fw2_offset = tmp_cdev->offset;
+ }
+
+ buf = malloc(mtd->erasesize);
+ if (!buf)
+ return -ENOMEM;
+
+ fcb = create_fcb(mtd, buf, firmware_cdev->offset, firmware_cdev->size, fw2_offset);
+ if (IS_ERR(fcb)) {
+ printf("Failed to initialize FCB: %ld\n", PTR_ERR(fcb));
+ return PTR_ERR(fcb);
+ }
+ encode_hamming_13_8(fcb, (void *)fcb + 512, 512);
+
+ for (block = bcb_cdev->offset; block < bcb_cdev->offset + bcb_cdev->size / 2;
+ block += mtd->erasesize) {
+
+ if (nand_isbad_bbt(mtd, block, false))
+ continue;
+
+ ret = write_fcb(mtd, buf, block);
+ if (ret) {
+ printf("Failed to write FCB to block %u\n", block);
+ return ret;
+ }
+
+ fcb_written++;
+ }
+
+ return fcb_written ? 0 : -ENOSPC;
+}
+
+BAREBOX_CMD_HELP_START(bcb)
+BAREBOX_CMD_HELP_USAGE("bcb <first_bootstream> [second_bootstream]\n")
+BAREBOX_CMD_HELP_SHORT("Write a BCB to NAND flash which an MX23/28 needs to boot.\n")
+BAREBOX_CMD_HELP_TEXT ("Example: bcb nand0.bootstream\n")
+BAREBOX_CMD_HELP_END
+
+BAREBOX_CMD_START(bcb)
+ .cmd = update_bcb,
+ .usage = "Writes a MX23/28 BCB data structure to flash",
+ BAREBOX_CMD_HELP(cmd_bcb_help)
+BAREBOX_CMD_END
--
1.7.10
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
