Hi André, André Lochotzke wrote: > for a small student project I want to add support to barebox for booting > from the NOR flash on the mini2440. I hope that it will not be too > difficult since barebox can already boot from NOR on different boards. > > Did somebody already do some work to enable NOR boot on the mini2440? > > Do you have any suggestion of where I should start? > > There is already an u-boot version since 2010 [1] that supports it. The > code can be found here [2]. > > Are the u-boot and barebox NOR subsystems very different? How much time > do you think would it take to get this done? Should be more or less trivial. Setup the SDRAM controller, copy Barebox itself to the SDRAM and branch to it. I didn't do that yet, because the NOR content is something like the "last resort" for a regular user to bring a bricked Mini2440 back to life. Regards, Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
