Hi Peter, On Wed, May 23, 2012 at 05:43:52PM +0200, Peter Kuennemann@Crane-Soft wrote: > Hi all. > > I am trying to setup my PCM043/IMX35 board to boot from the > USB MMC card but til now I do have have any clue how to manage. > Searching the net, did not provide any hints regard that board. > > I'ld like to have barebox to allow me to use the USB/MMC card > as boot device. Is there a chance to boot from SD-Card at all? Do you want to start barebox from USB/MMC or do you only want to load the kernel from USB/MMC? The latter is possible, though you have to add support for it. See arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c for an example how to do it. Basically for MMC you have to configure the iomuxer and register the device. USB might be a bit more complicated, you have to configure the phy correctly. Sascba -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
