Hi Roberto, On Tue, May 22, 2012 at 02:11:46PM +0200, Roberto Nibali wrote: > Hi > > I have been trying to boot a customized mx25 based device using barebox and > I seem to be missing a few basic pointers, I believe, since it does not > work. I have attached my config and put my current patch-set online: > http://pastebin.com/KUVAwWRk. It's based on git commit 'dadcf5bd8f715'. > > I don't know if the way of adding the boatloader to the SD card for later > installing it onto NOR flash is the correct one. I currently issue a: > > sudo dd if=barebox.bin of=/dev/sdc bs=512 skip=2 seek=2 && sync > You have configured barebox for external boot mode. This is not suitable for SD cards, you have to use internal bootmode instead. This requires that you provide a dtd header, see for example the babbage board for how to do this. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
