I'm loading barebox as a second stage bootloader, because I haven't figured out yet how to boot it from SD card directly. It seems though as if barebox in general is not happy with the SD card:
barebox 2012.05.0-00194-g38d361d-dirty #0 Mon May 14 10:52:47 CEST 2012
Board: SID1 NOAH
registered netconsole as cs1
imx-esdhc@mci0: registered as mci0
imx-esdhc@imx-esdhc0: timeout 1
Cannot reset the SD/MMC card
ehci@ehci0: USB EHCI 1.00
cfi_flash@cfi_flash0: found cfi flash at a0000000, size 67108864
Malloc space: 0x83b00000 -> 0x83efffff (size 4 MB)
Stack space : 0x83af8000 -> 0x83b00000 (size 32 kB)
envfs: wrong magic on /dev/env0
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
Hit any key to stop autoboot: 5
type update_kernel nor [<imagename>] to update kernel into flash
type update_root nor [<imagename>] to update rootfs into flash
sid1-noah:/
sid1-noah:/ devinfo mci0
resources:
driver: mci
No information available:
MCI card not probed yet
Parameters:
probe = 0
sid1-noah:/ mci0.probe=1
imx-esdhc@imx-esdhc0: timeout 1
Cannot reset the SD/MMC card
set parameter: Connection timed out
sid1-noah:/
Any ideas? What are possible causes of this?
Regards
Roberto
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
