Hi Sascha, Le Thu, 17 May 2012 19:36:19 +0200, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> a écrit : > On Thu, May 17, 2012 at 05:46:14PM +0200, Eric Bénard wrote: > > else we can get a 1 second timeout at each boot since > > "6cbecc4 net: miidev: properly check for MII reset" > > I had this issue aswell on the babbage board. It turned out that this > was really an issue in the initialization order. On the babbage the fec > was registered before power was applied to the phy. Looking at the > eukrea mx51 code it seems that you reset the phy after you have > registered the fec. I suggest that you change the order instead of > applying this patch. > in fact I met the problem on cpuimx25 & cpuimx35 (because a wrong PHY address was set in the board configuration) so I don't have the problem anymore. But I think launching the autonegotiation during the boot is not necessary and can be a source of time loss. Eric _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
