Make the autoboot work : - if no USB cuable is plugged, continue directly to autoboot - if an USB cable is plugged, wait for 3 seconds for any input on the USB serial gadget, and if none happens, continue to autoboot linux kernel - else interrupt autoboot and interact on barebox console Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx> --- arch/arm/boards/mioa701/env/bin/init | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/arch/arm/boards/mioa701/env/bin/init b/arch/arm/boards/mioa701/env/bin/init index 2e806b9..494d067 100644 --- a/arch/arm/boards/mioa701/env/bin/init +++ b/arch/arm/boards/mioa701/env/bin/init @@ -22,12 +22,17 @@ if [ $? = 0 ]; then fi echo "No custom environment found" -echo -n "Hit any key to stop autoboot: " -timeout -a $autoboot_timeout -if [ $? != 0 ]; then - echo - echo "Welcome to barebox console" - exit + +gpio_get_value 22 +is_usb_connected=$? +if [ $is_usb_connected != 0 ]; then + echo -n "Hit any key to stop autoboot: " + timeout -a $autoboot_timeout + if [ $? != 0 ]; then + echo + echo "Welcome to barebox console" + exit + fi fi echo "Booting linux kernel on docg3 chip ..." -- 1.7.10 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
