Alexey Galakhov wrote: > Signed-off-by: Alexey Galakhov <agalakhov@xxxxxxxxx> > --- > arch/arm/Kconfig | 6 + > arch/arm/Makefile | 1 + > arch/arm/boards/tiny210/Makefile | 1 + > arch/arm/boards/tiny210/config.h | 1 + > arch/arm/boards/tiny210/lowlevel.c | 41 + > arch/arm/boards/tiny210/tiny210.c | 113 +++ > arch/arm/mach-samsung/Kconfig | 24 + > arch/arm/mach-samsung/Makefile | 1 + > arch/arm/mach-samsung/clocks-s5pcxx.c | 98 +++ > arch/arm/mach-samsung/gpio-s5pcxx.c | 123 +++ > arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h | 55 ++ > arch/arm/mach-samsung/include/mach/gpio.h | 3 + > arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h | 49 ++ > arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h | 798 ++++++++++++++++++++ > arch/arm/mach-samsung/include/mach/s3c-clocks.h | 3 + > arch/arm/mach-samsung/include/mach/s3c-iomap.h | 3 + > 16 files changed, 1320 insertions(+) > create mode 100644 arch/arm/boards/tiny210/Makefile > create mode 100644 arch/arm/boards/tiny210/config.h > create mode 100644 arch/arm/boards/tiny210/lowlevel.c > create mode 100644 arch/arm/boards/tiny210/tiny210.c > create mode 100644 arch/arm/mach-samsung/clocks-s5pcxx.c > create mode 100644 arch/arm/mach-samsung/gpio-s5pcxx.c > create mode 100644 arch/arm/mach-samsung/include/mach/clocks-s5pcxx.h > create mode 100644 arch/arm/mach-samsung/include/mach/iomap-s5pcxx.h > create mode 100644 arch/arm/mach-samsung/include/mach/iomux-s5pcxx.h > [...] This patch series reflects your development steps (2nd stage first, then native boot support). But this is not useful when including the results into the Barebox repository. For example you should add your new platform at the end of this patch series after all the required preparations are done to make it work. jbe -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox