On 17:08 Wed 25 Apr , Gabriel Tisan wrote: > On Fri, Apr 6, 2012 at 4:59 AM, Jean-Christophe PLAGNIOL-VILLARD > <plagnioj@xxxxxxxxxxxx> wrote: > > On 11:27 Thu 05 Apr , Sascha Hauer wrote: > >> On Thu, Apr 05, 2012 at 09:06:30AM +0200, Gabriel Tisan wrote: > >> > I use external boot mode from NAND. I choosed > >> > CONFIG_NAND_IMX_BOOT_512_2K although I have a flash with 2k page size. > >> > >> Try 'make barebox.S' and have a look at the resulting barebox.S file. > >> Everything including > >> > >> reset > >> __mmu_cache_flush > >> imx_nand_load_image > >> > >> must fit into the first 2k of memory. We currently do not catch this > >> (though we could using a seperate linker section for this). If your > >> lowlevel init code is too big then you can easily exceed this > >> limitation. > > we can now I add an option for this > > > Which commit include this option ? > > Actually which is the last stable barebox ? I've got the version from > master with last commit 96a43ca "pxa27x_udc: Fix compilation warning" > from 23 Mar 2012. you need to check the commits that put the bare_init size and if you can not use it do simthing similar for the pre_image Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
