Hi Renaud, On Fri, Apr 13, 2012 at 02:04:29PM +0100, Renaud Barbier wrote: > This patchset introduces the MPC85xx architecture to Barebox. The > existing PPC code is modified to enable multiple PowerPC architecture > support. All existing architecture specific MPC5xxx code which prevents > adding additional architectures is moved into the architecture specific > subdirectories and the PCM030 configuration fixed to use this new > configuration. > > Base MPC85xx infrastructure is added to enable the required > functionality for a minimal boot target in 32 bit addressing mode > using an e500v2 core. > > Finally support is added for a minimal Freescale P2020RDB platform with > driver support currently limited to NOR and serial port only. > > Renaud Barbier (3): > Preparation stage to support multiple PPC architectures > Minimal support of the MPC85xx architecture > Minimal P2020RDB platform support and configuration file > Much better than the last version, thanks. I realized that you base parts of your code on the unused board_data. I just sent out a patch to remove the unused code, and you shouldn't use it on the new mpc85xx support also. I'll have a close look at your series later, this is only one thing I realized when looking at it. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
