As the mainline kernel does not enable the bootp support by default Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> --- arch/arm/boards/at91rm9200ek/env/config | 2 +- arch/arm/boards/at91sam9260ek/env/config | 2 +- arch/arm/boards/at91sam9261ek/env/config | 2 +- arch/arm/boards/at91sam9263ek/env/config | 2 +- arch/arm/boards/at91sam9m10g45ek/env/config | 2 +- arch/arm/boards/tny-a926x/env/config | 2 +- arch/arm/boards/usb-a926x/env/config | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boards/at91rm9200ek/env/config b/arch/arm/boards/at91rm9200ek/env/config index 12655c2..d1d9e8e 100644 --- a/arch/arm/boards/at91rm9200ek/env/config +++ b/arch/arm/boards/at91rm9200ek/env/config @@ -2,7 +2,7 @@ # use 'dhcp' to do dhcp in barebox and in kernel # use 'none' if you want to skip kernel ip autoconfiguration -ip=dhcp +ip=dhcp-barebox # or set your networking parameters here #eth0.ipaddr=a.b.c.d diff --git a/arch/arm/boards/at91sam9260ek/env/config b/arch/arm/boards/at91sam9260ek/env/config index 74e793c..2c0f075 100644 --- a/arch/arm/boards/at91sam9260ek/env/config +++ b/arch/arm/boards/at91sam9260ek/env/config @@ -2,7 +2,7 @@ # use 'dhcp' to do dhcp in barebox and in kernel # use 'none' if you want to skip kernel ip autoconfiguration -ip=dhcp +ip=dhcp-barebox if [ x$armlinux_architecture = x1099 ] then diff --git a/arch/arm/boards/at91sam9261ek/env/config b/arch/arm/boards/at91sam9261ek/env/config index fca5184..be4d37c 100644 --- a/arch/arm/boards/at91sam9261ek/env/config +++ b/arch/arm/boards/at91sam9261ek/env/config @@ -2,7 +2,7 @@ # use 'dhcp' to do dhcp in barebox and in kernel # use 'none' if you want to skip kernel ip autoconfiguration -ip=dhcp +ip=dhcp-barebox if [ x$armlinux_architecture = x848 ] then diff --git a/arch/arm/boards/at91sam9263ek/env/config b/arch/arm/boards/at91sam9263ek/env/config index 95eb8af..93eeb1e 100644 --- a/arch/arm/boards/at91sam9263ek/env/config +++ b/arch/arm/boards/at91sam9263ek/env/config @@ -2,7 +2,7 @@ # use 'dhcp' to do dhcp in barebox and in kernel # use 'none' if you want to skip kernel ip autoconfiguration -ip=dhcp +ip=dhcp-barebox dhcp_vendor_id=barebox-at91sam9263ek # or set your networking parameters here diff --git a/arch/arm/boards/at91sam9m10g45ek/env/config b/arch/arm/boards/at91sam9m10g45ek/env/config index 6b96599..d115132 100644 --- a/arch/arm/boards/at91sam9m10g45ek/env/config +++ b/arch/arm/boards/at91sam9m10g45ek/env/config @@ -2,7 +2,7 @@ # use 'dhcp' to do dhcp in barebox and in kernel # use 'none' if you want to skip kernel ip autoconfiguration -ip=dhcp +ip=dhcp-barebox dhcp_vendor_id=barebox-at91sam9m10g45ek # or set your networking parameters here diff --git a/arch/arm/boards/tny-a926x/env/config b/arch/arm/boards/tny-a926x/env/config index 0ca38d5..b5215dc 100644 --- a/arch/arm/boards/tny-a926x/env/config +++ b/arch/arm/boards/tny-a926x/env/config @@ -2,7 +2,7 @@ # use 'dhcp' to do dhcp in barebox and in kernel # use 'none' if you want to skip kernel ip autoconfiguration -ip=none +ip=dhcp-barebox # or set your networking parameters here #eth0.ipaddr=a.b.c.d diff --git a/arch/arm/boards/usb-a926x/env/config b/arch/arm/boards/usb-a926x/env/config index ff097a0..1f72803 100644 --- a/arch/arm/boards/usb-a926x/env/config +++ b/arch/arm/boards/usb-a926x/env/config @@ -2,7 +2,7 @@ # use 'dhcp' to do dhcp in barebox and in kernel # use 'none' if you want to skip kernel ip autoconfiguration -ip=dhcp +ip=dhcp-barebox dhcp_vendor_id=barebox-at91sam9x5ek # or set your networking parameters here -- 1.7.9.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
