Hi, for the case someone uses DHCP for her/his network configuration in Barebox, there is a race with the setup of some variables used for the NFS root. The following patch fixes it, but maybe there are better solutions than that. ------------------------------------------------------------------------------ Setting up NFS root/TFTP related variables is successfull only if the network interface is already configured. For the case someone is using DHCP, this fails, because all these vars are still empty. Changing the order when the DHCP is done solves the issue. Signed off by: Juergen Beisert <jbe@xxxxxxxxxxxxxx> --- defaultenv/bin/boot | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) Index: barebox-2011.05.0/defaultenv/bin/boot =================================================================== --- barebox-2011.05.0.orig/defaultenv/bin/boot +++ barebox-2011.05.0/defaultenv/bin/boot @@ -18,6 +18,9 @@ fi if [ x$ip = xdhcp ]; then bootargs="$bootargs ip=dhcp" + if [ x$kernel_loc = xnfs ] || [ x$kernel_loc = xtftp ]; then + dhcp + fi elif [ x$ip = xnone ]; then bootargs="$bootargs ip=none" else @@ -75,9 +78,6 @@ if [ ! -e /dev/ram0.kernel ]; then fi if [ x$kernel_loc = xnfs ] || [ x$kernel_loc = xtftp ]; then - if [ x$ip = xdhcp ]; then - dhcp - fi if [ $kernelimage_type = uimage ]; then netload="/dev/ram0.kernel" elif [ $kernelimage_type = zimage ]; then Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | Phone: +49-5121-206917-5128 | Vertretung Sued/Muenchen, Germany | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
