On Mon, Jul 11, 2011 at 05:14:54PM +0200, Kamel BOUHARA wrote: > Hi, > > Im trying to port barebox to my Armadeus apf27 board (based on the Freescale > imx27 with a 512MiB NAND and 1GB of SDRAM). > I've first tried the phytec imx27 configuration and I got it worked until > the Linux uncompressing task (the machine ID is bad so I didn't expect it > will boot fine :)). > So I just copied the phycard-imx27 board directory and I followed the > boards.dox in order to add support for my board. > But when I've tried to boot again it was not working anymore ... > > There are somethings stranges with the FEC, here is the result of a memory > display with both phytec and my own board : > > > barebox@Phytec phyCard-i.MX27:/ md -s /dev/phy0 > > > > 00000000: ffffffff ffffffff ffffffff ffffffff ................ > > > > 00000010: ffffffff ffffffff ffffffff ffffffff ................ > > > > 00000020: ffffffff ffffffff ffffffff ffffffff ................ > > > > 00000030: ffffffff ffffffff ffffffff ffffffff ................ This means your phy is not configured correctly. Do you usse the correct address (can be passed in platform_data). Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
