On 2 July 2011 18:41, Shinya Kuribayashi <skuribay@xxxxxxxxx> wrote: > On 6/29/11 12:24 PM, Antony Pavlov wrote: ... >> arch/mips/mach-mti-malta/Makefile | 1 + >> arch/mips/mach-mti-malta/include/mach/hardware.h | 32 >> +++++++++++++++++++ >> arch/mips/mach-mti-malta/reset.c | 36 >> ++++++++++++++++++++++ >> 6 files changed, 104 insertions(+), 0 deletions(-) >> create mode 100644 arch/mips/mach-mti-malta/Kconfig >> create mode 100644 arch/mips/mach-mti-malta/Makefile >> create mode 100644 arch/mips/mach-mti-malta/include/mach/hardware.h >> create mode 100644 arch/mips/mach-mti-malta/reset.c > > Just mach-malta would be good? I don't want to see two '-' hyphens. > > I'm working on the ARM kernel these days, and find mach/plat-based > categorizing technique useful/promising, and this is a good opportunity > to try in this MIPS support (even if the Linux/MIPS kernel doesn't). > I don't like very much 'mti-malta' name. linux kernel use this name, but I can change it :)) >> + * barebox is free software: you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation, either version 3 of the License, or >> + * (at your option) any later version. > > GPLv3? I'm not sure which GPL version should be applied to barebox, > but as it's highly based on the Linux kernel technology, GPLv2 (or > later) would be the case. Correct remark. -- Best regards, Antony Pavlov _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
