[RFC PATCH] atmel-mci: fix initialization of 8bit-bus-width-mode for at91sam9g45

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When the bus_width was set to 8, then only one data-line has been initialized.

Signed-off-by: Hubert Feurstein <h.feurstein@xxxxxxxxx>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
 It seems that nobody tried the 8bit mode yet, because this init-bug is present in the
 linux kernel as well. 

 @Sascha: I assume the mci-host-driver should set both bits (MMC_MODE_4BIT and MMC_MODE_8BIT)
 when bus_width == 8 ???

 arch/arm/mach-at91/at91sam9g45_devices.c |    4 ++--
 drivers/mci/atmel_mci.c                  |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index dc01705..a474bd7 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -285,7 +285,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
 
 		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
 		at91_set_A_periph(AT91_PIN_PA2, 1);
-		if (data->bus_width == 4) {
+		if (data->bus_width >= 4) {
 			at91_set_A_periph(AT91_PIN_PA3, 1);
 			at91_set_A_periph(AT91_PIN_PA4, 1);
 			at91_set_A_periph(AT91_PIN_PA5, 1);
@@ -310,7 +310,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
 
 		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
 		at91_set_A_periph(AT91_PIN_PA23, 1);
-		if (data->bus_width == 4) {
+		if (data->bus_width >= 4) {
 			at91_set_A_periph(AT91_PIN_PA24, 1);
 			at91_set_A_periph(AT91_PIN_PA25, 1);
 			at91_set_A_periph(AT91_PIN_PA26, 1);
diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index 49a7851..d8bcf81 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -451,9 +451,9 @@ static int mci_probe(struct device_d *hw_dev)
 	host->mci.init = mci_reset;
 
 	host->mci.host_caps = pd->host_caps;
-	if (pd->bus_width == 4)
+	if (pd->bus_width >= 4)
 		host->mci.host_caps |= MMC_MODE_4BIT;
-	else if (pd->bus_width == 8)
+	if (pd->bus_width == 8)
 		host->mci.host_caps |= MMC_MODE_8BIT;
 
 	host->base = (void __iomem *)hw_dev->map_base;
-- 
1.7.4.1


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox


[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux