enable fat support
Signed-off-by: Hubert Feurstein <h.feurstein@xxxxxxxxx>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
---
arch/arm/boards/at91sam9m10g45ek/init.c | 17 +++++++++++++++++
arch/arm/configs/at91sam9m10g45ek_defconfig | 5 +++++
2 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c b/arch/arm/boards/at91sam9m10g45ek/init.c
index 77d51b7..dcd2fe6 100644
--- a/arch/arm/boards/at91sam9m10g45ek/init.c
+++ b/arch/arm/boards/at91sam9m10g45ek/init.c
@@ -22,6 +22,7 @@
#include <common.h>
#include <net.h>
+#include <mci.h>
#include <init.h>
#include <environment.h>
#include <asm/armlinux.h>
@@ -110,11 +111,27 @@ static struct at91_ether_platform_data macb_pdata = {
.phy_addr = 0,
};
+#if defined(CONFIG_MCI_ATMEL)
+static struct atmel_mci_platform_data ek_mci_data = {
+ .bus_width = 4,
+ .host_caps = MMC_MODE_HS,
+ .detect_pin = AT91_PIN_PD10,
+};
+
+static void ek_add_device_mci(void)
+{
+ at91_add_device_mci(0, &ek_mci_data);
+}
+#else
+static void ek_add_device_mci(void) {}
+#endif
+
static int at91sam9m10g45ek_devices_init(void)
{
at91_add_device_sdram(128 * 1024 * 1024);
ek_add_device_nand();
at91_add_device_eth(&macb_pdata);
+ ek_add_device_mci();
devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
diff --git a/arch/arm/configs/at91sam9m10g45ek_defconfig b/arch/arm/configs/at91sam9m10g45ek_defconfig
index e1c6cef..deca884 100644
--- a/arch/arm/configs/at91sam9m10g45ek_defconfig
+++ b/arch/arm/configs/at91sam9m10g45ek_defconfig
@@ -53,3 +53,8 @@ CONFIG_CFI_BUFFER_WRITE=y
CONFIG_MTD=y
CONFIG_NAND=y
CONFIG_UBI=y
+CONFIG_MCI=y
+CONFIG_MCI_WRITE=y
+CONFIG_MCI_ATMEL=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
--
1.7.4.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
