Hi, you where right about CONFIG_GLOB... sorry. and what about the other problem on crc error? (http://www.spinics.net/lists/u-boot-v2/msg02944.html) is it ok the correction? but i have some problem on saving enviroment... I mean if i create a enviroment variable from command line (i.e. myvar=testvalue) and perorm saveenv command. then reset the board.. i should find the variable again (using printenv i doesn't have it defined) i tried to modify a scrit in the /env directory (just adding an echo) then "make" but downloading the new bin... but i cannot see the new init script .. in the /env/bin directory i still have the old one... can anybody explain to me the usage of this menuconfig item: [*] Compile in default environment â â â â [*] Default environment generic â â â â (arch/arm/boards/freescale-mx25-3-stack/env/) Default environment path attached my config file just to understand if i'm doign something wrong on enviroment usage... thanks Omar Dott. Ing. Omar Pighi R&D Selea s.r.l. Via A.Moro 69 46015 Cicognara (MN) ITALY tel +39-0375-889091 fax +39-0375-889080 web:www.selea.com Il 18/04/2011 19:48, Sascha Hauer ha scritto: > On Mon, Apr 18, 2011 at 05:03:30PM +0200, Omar Pighi wrote: > >> reading here: >> http://www.spinics.net/lists/u-boot-v2/msg02944.html >> >> it seems that now it works and save enviroments with correct crc. >> but when i triy to ypdate_kernel it says_ >> partition dev/nand0.kernel.bb not found... no one .bb partition has been >> created. >> it should be done by hush_hack but it doesn't. >> >> reading here: >> http://www.spinics.net/lists/u-boot-v2/msg02957.html >> >> but "CONFIG_GLOB=y" >> >> I cannot find it in any kconfig file... so it is not possible to set >> using menuconfig... should i add by hand. this means something missin in >> the kconfigs... >> > CONFIG_GLOB depends on CONFIG_SHELL_HUSH. Could it be that hush is not > enabled in you config? > > Sascha > >
# # Automatically generated make config: don't edit # Linux/arm 2011.04.0 Barebox Configuration # Tue Apr 19 09:55:24 2011 # CONFIG_CRC32=y CONFIG_CMD_BOOTM=y CONFIG_ARCH_IMX_INTERNAL_BOOT=y CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/freescale-mx25-3-stack/env/" CONFIG_I2C_IMX=y CONFIG_GLOB=y CONFIG_CMD_CD=y CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y CONFIG_ZLIB=y CONFIG_CMD_DEVINFO=y CONFIG_CMD_FALSE=y CONFIG_DYNAMIC_CRC_TABLE=y CONFIG_DEFAULT_ENVIRONMENT=y CONFIG_HAS_CFI=y CONFIG_CMD_EXPORT=y CONFIG_CMD_CP=y CONFIG_NAND_IMX=y CONFIG_NET_DHCP=y CONFIG_MTD=y CONFIG_SHELL_HUSH=y CONFIG_MTD_NAND_IDS=y CONFIG_CMD_CRC_CMP=y CONFIG_CMD_ARM_CPUINFO=y CONFIG_SIMPLE_READLINE=y CONFIG_CMD_PARTITION=y CONFIG_DRIVER_NET_FEC_IMX=y CONFIG_ARM=y CONFIG_MAXARGS=16 CONFIG_GENERIC_GPIO=y CONFIG_PARTITION=y CONFIG_CMD_HELP=y CONFIG_ENABLE_DEVICE_NOISE=y CONFIG_CMD_CRC=y CONFIG_CMD_SAVEENV=y CONFIG_CMD_TRUE=y CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG" CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y CONFIG_CMD_FLASH=y CONFIG_ARCH_IMX25=y CONFIG_CMD_TEST=y CONFIG_CMD_LOADENV=y CONFIG_CMD_MKDIR=y CONFIG_TEXT_BASE=0x83f00000 CONFIG_I2C_MC34704=y CONFIG_CPU_ARM926T=y CONFIG_STACK_SIZE=0x8000 CONFIG_CPU_32=y CONFIG_ENABLE_PARTITION_NOISE=y CONFIG_PROCESS_ESCAPE_SEQUENCE=y CONFIG_ERRNO_MESSAGES=y CONFIG_ARCH_TEXT_BASE=0x83f00000 CONFIG_NET_TFTP=y CONFIG_CPU_32v5=y CONFIG_BZLIB=y CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_CMD_RESET=y CONFIG_GREGORIAN_CALENDER=y CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y CONFIG_CMD_PWD=y CONFIG_ARCH_IMX=y CONFIG_MIIDEV=y CONFIG_I2C=y CONFIG_ENV_HANDLING=y CONFIG_CMD_CLEAR=y CONFIG_NET_NFS=y CONFIG_NAND=y CONFIG_NET=y CONFIG_ARCH_HAS_FEC_IMX=y CONFIG_ARCH_IMX_INTERNAL_BOOT_NAND=y CONFIG_CMD_BOOTM_BZLIB=y CONFIG_MALLOC_SIZE=0x400000 CONFIG_CMD_GO=y CONFIG_GENERIC_LINKER_SCRIPT=y CONFIG_ENABLE_FLASH_NOISE=y CONFIG_CMD_BOOTU=y CONFIG_CMD_VERSION=y CONFIG_NET_PING=y CONFIG_CMD_BOOTM_SHOW_TYPE=y CONFIG_HAS_KALLSYMS=y CONFIG_CMD_UMOUNT=y CONFIG_CMD_TIMEOUT=y CONFIG_CMD_MEMORY=y CONFIG_CMD_BOOTZ=y CONFIG_MACH_HAS_LOWLEVEL_INIT=y CONFIG_CMD_ECHO=y CONFIG_LOCALVERSION_AUTO=y CONFIG_HAS_MODULES=y CONFIG_CMD_CAT=y CONFIG_CMD_PRINTENV=y CONFIG_CMD_LS=y CONFIG_CMD_RM=y CONFIG_CONSOLE_FULL=y CONFIG_BAUDRATE=115200 CONFIG_MACH_DO_LOWLEVEL_INIT=y CONFIG_BOARDINFO="Freescale MX25 3Stack" CONFIG_CONSOLE_ACTIVATE_FIRST=y CONFIG_TIMESTAMP=y CONFIG_FREESCALE_MX25_3STACK_SDRAM_64MB_DDR2=y CONFIG_FS_DEVFS=y CONFIG_CBSIZE=1024 CONFIG_HUSH_GETOPT=y CONFIG_CMD_MOUNT=y CONFIG_FS_CRAMFS=y CONFIG_PROMPT_HUSH_PS2="> " CONFIG_MACH_FREESCALE_MX25_3STACK=y CONFIG_IMX_CLKO=y CONFIG_CMD_EDIT=y CONFIG_NET_NETCONSOLE=y CONFIG_CMD_ECHO_E=y CONFIG_FS_RAMFS=y CONFIG_MEMORY_LAYOUT_DEFAULT=y CONFIG_PROMPT="barebox:" CONFIG_CMD_BOOTM_ZLIB=y CONFIG_CMD_MEMINFO=y CONFIG_DRIVER_SERIAL_IMX=y CONFIG_LONGHELP=y CONFIG_CMD_RMDIR=y CONFIG_DEBUG_INFO=y
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
