Yes, I am using the freescale kernel unfotunately. Do you know of some way to fix this (a patch for the freescale kernel maybe)? Thanks, Boaz. On Tue, 2011-03-08 at 16:35 +1100, Marc Reilly wrote: > On Tuesday, March 08, 2011 03:35:10 am Boaz Ben-David wrote: > > Hi, > > > > When using the iMX35 freescale 3stack we are having some issues with the FB > > driver. On device boot we enable the fb using "fb0.enable=1" and then try > > to boot the kernel from nand. The problem is that after the kernel is > > loaded to RAM and extracted the board hangs. If we do not init the fb0 > > device but simply boot the kernel it works fine. Trying "fb0.enable=0" > > before booting also did not help. > > Did anyone encounter this issue yet or are we doing something wrong? > > Are you using the freescale kernel? It doesn't handle loading the IPU driver > if the IPU has been enabled previously.. (an IRQ fires before all the driver > structures have been initialized and crashes) > > Cheers, > Marc > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
