Hi Franck, On Thu, Mar 03, 2011 at 11:58:14PM +0100, franck.jullien@xxxxxxxxx wrote: > From: Franck JULLIEN <franck.jullien@xxxxxxxxx> > > This is the base files of the Nios2 port. Almost everything is comming from u-boot. > When those files are acked, I'll post drivers and utility commands. Soo many patches ;). You can safely combine all these into two patches, one for the nios2 support and one for the generic board. The patches are only useful as a whole anyway, so no need to split them up that fine. You will hit the list limit, so give me some time to go to the moderator interface and and it through. I'm not through all patches, but some remarks here: There is some whitespace damage all around like spaces which should be tabs. Also, please do not use direct pointer derefs to access registers. You should use readl/writel accessors for them. Thanks for doing this work. Although I don't have a nios baord, I really appreciate extending barebox to more architectures. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
