Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/boards/guf-neso/board.c | 38 +++++---------------------------------
1 files changed, 5 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boards/guf-neso/board.c b/arch/arm/boards/guf-neso/board.c
index 9c85c08..d371dd6 100644
--- a/arch/arm/boards/guf-neso/board.c
+++ b/arch/arm/boards/guf-neso/board.c
@@ -44,6 +44,7 @@
#include <mach/imx-nand.h>
#include <mach/imx-pll.h>
#include <mach/imxfb.h>
+#include <mach/devices-imx27.h>
/* two pins are controlling the CS signals to the USB phys */
#define USBH2_PHY_CS_GPIO (GPIO_PORTF + 20)
@@ -71,26 +72,12 @@ static struct fec_platform_data fec_info = {
.phy_addr = 31,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = 0x1002b000,
- .platform_data = &fec_info,
-};
-
static struct imx_nand_platform_data nand_info = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = 0xd8000000,
- .platform_data = &nand_info,
-};
-
static struct imx_fb_videomode imxfb_mode = {
.mode = {
.name = "CPT CLAA070LC0JCT",
@@ -139,14 +126,6 @@ static struct imx_fb_platform_data neso_fb_data = {
.framebuffer_ovl = (void *)0xa7f00000,
};
-static struct device_d imxfb_dev = {
- .id = -1,
- .name = "imxfb",
- .map_base = 0x10021000,
- .size = 0x1000,
- .platform_data = &neso_fb_data,
-};
-
#ifdef CONFIG_USB
static struct device_d usbh2_dev = {
@@ -334,16 +313,16 @@ static int neso_devices_init(void)
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
- register_device(&nand_dev);
+ imx27_add_nand(&nand_info);
register_device(&sdram_dev);
- register_device(&imxfb_dev);
+ imx27_add_fb(&neso_fb_data);
#ifdef CONFIG_USB
neso_usbh_init();
register_device(&usbh2_dev);
#endif
- register_device(&fec_dev);
+ imx27_add_fec(&fec_info);
devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
@@ -360,16 +339,9 @@ static int neso_devices_init(void)
device_initcall(neso_devices_init);
-static struct device_d neso_serial_device = {
- .id = -1,
- .name = "imx_serial",
- .map_base = IMX_UART1_BASE,
- .size = 4096,
-};
-
static int neso_console_init(void)
{
- register_device(&neso_serial_device);
+ imx27_add_uart0();
return 0;
}
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
