Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/boards/phycard-i.MX27/pca100.c | 28 +++++-----------------------
1 files changed, 5 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boards/phycard-i.MX27/pca100.c b/arch/arm/boards/phycard-i.MX27/pca100.c
index 3a96180..32f7e74 100644
--- a/arch/arm/boards/phycard-i.MX27/pca100.c
+++ b/arch/arm/boards/phycard-i.MX27/pca100.c
@@ -1,4 +1,4 @@
- /*
+/*
* Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
@@ -39,6 +39,7 @@
#include <asm/mmu.h>
#include <usb/isp1504.h>
#include <mach/iomux-mx27.h>
+#include <mach/devices-imx27.h>
static struct memory_platform_data ram_pdata = {
.name = "ram0",
@@ -58,26 +59,12 @@ static struct fec_platform_data fec_info = {
.phy_addr = 1,
};
-static struct device_d fec_dev = {
- .id = -1,
- .name = "fec_imx",
- .map_base = 0x1002b000,
- .platform_data = &fec_info,
-};
-
struct imx_nand_platform_data nand_info = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
-static struct device_d nand_dev = {
- .id = -1,
- .name = "imx_nand",
- .map_base = 0xd8000000,
- .platform_data = &nand_info,
-};
-
#ifdef CONFIG_USB
static struct device_d usbh2_dev = {
.id = -1,
@@ -110,11 +97,6 @@ static void pca100_usbh_init(void)
}
#endif
-static struct device_d mmc_dev = {
- .name = "imx-mmc",
- .map_base = 0x10014000,
-};
-
#ifdef CONFIG_MMU
static void pca100_mmu_init(void)
{
@@ -207,10 +189,10 @@ static int pca100_devices_init(void)
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
- register_device(&nand_dev);
+ imx27_add_nand(&nand_info);
register_device(&sdram_dev);
- register_device(&fec_dev);
- register_device(&mmc_dev);
+ imx27_add_fec(&fec_info);
+ imx27_add_mmc0(NULL);
PCCR1 |= PCCR1_PERCLK2_EN;
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
