Hey I am new on bare box I have download it from git repo and when I make the barebox.bin with omap3530_beagle_defconfig this is the output Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24) Reading boot sector Loading u-boot.bin from mmc barebox 2010.10.0-00086-ga14c018 (Oct 21 2010 - 12:19:10) Board: Texas Instrument's Beagle I2C probe i2c-omap@i2c-omap0: bus 0 rev3.12 at 100 kHz ehci@ehci0: USB EHCI 1.00 NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit) Malloc space: 0x80c00000 -> 0x81000000 (size 4 MB) Stack space : 0x80bf8000 -> 0x80c00000 (size 32 kB) Open /dev/env0 No such file or directory running /env/bin/init... not found barebox> ls . .. dev barebox> ls /dev/ zero mem ram0 twl4030 nand0 nand_oob0 And when I compile with omap3530_beagle_per_uart_defconfig This is the output Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24) Reading boot sector Loading u-boot.bin from mmc barebox 2010.10.0-00086-ga14c018 (Oct 21 2010 - 12:41:33) Board: Texas Instrument's Beagle Malloc space: 0x87bfff10 -> 0x87ffff10 (size 4 MB) Stack space : 0x87bf7f10 -> 0x87bfff10 (size 32 kB) running /env/bin/init... not found X-load Beagle>ls Unknown command 'ls' X-load Beagle>help Unknown command 'help' And the same to all the commands What I am looking for is to use bare box with MMC, the kernel image and the File System are on the MMC on different partitions, I have tested them and work perfect with the traditioanl u-boot. I really want to try this new boat loader Thanks Victor Rodriguez _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
