On Tuesday 21 August 2018 03:20:43 Dr. Nikolaus Klepp wrote: > Am Dienstag, 21. August 2018 schrieb Gene Heskett: > > On Monday 20 August 2018 10:41:23 Dr. Nikolaus Klepp wrote: > > > Am Montag, 20. August 2018 schrieb Gene Heskett: > > > > [...] > > > > These guys make a pretty good installer simply because they know > > > > what it needs and doesn't need to run LinuxCNC right. They don't > > > > care if it doesn't run on cousin Molly's washing machine, > > > > although with some config effort, it can probably run it, better > > > > than the programming it came with. > > > > > > > > I certainly had no such problems installing tde on top of the > > > > kde I originally loaded onto my Dell running a grizzly G0704 > > > > mill on a special wheezy install. So I'll do the same and then > > > > install tde on that. > > > > > > > > Back later with grins or tears. > > > > > > > > Thanks Michelle. > > > > > > Hi Gene! > > > > > > You should definitly walk the devuan road. I had a hell of a time > > > with machinekit on BBB, till I found out how to get rid of the > > > systemd stuff. When you run stretch + linuxcnc, you'll most likely > > > get bad surprises (aka. latency > 400000ns) with the 4.*-rtpreempt > > > kernel > > > > > > Nik > > > > Its tears so far Nik. There are so many differences just in the > > ext4's used that one of them should be renamed, they will NOT cross > > mount, ext4 disk to ext4 mount. > > Hi Gene! > > When you cannot mount the ext4 partions from one another, then there > is something very wrong. ext4 can be mounted as ext2 and that should > alway work - at least, if the drives and filesystems are ok. > > Nik I'll try that (mounting the old wheezy partitions as ext2) on the next install, but first feed the missus. -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe@xxxxxxxxxxxxxxxxxxxxxxxxxx For additional commands, e-mail: trinity-users-help@xxxxxxxxxxxxxxxxxxxxxxxxxx Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
