On 01/01/17 11:42 AM, Slávek Banko wrote:
On Sunday 01 of January 2017 15:51:17 L.S. McCarty wrote:
On 01/01/17 05:23 AM, Slávek Banko wrote:
On Sunday 01 of January 2017 06:13:30 Michele Calgaro wrote:
On 2017/01/01 05:50 AM, L.S. McCarty wrote:
Hello to all.
I'm a long-time TDE user running TDE 14.0.4 amd64 on Debian 9.x
Stretch (unstable, actually Siduction, using systemd). It works well,
although I occasionally run into minor issues that I eventually
solve. It is after all "unstable".
Over the last few weeks a problem remains, binutils_2.27-9_amd64.deb
works fine, but several updates of this program which can be loaded
by itself, most recently binutils_2.27.90.201612331-1_amd64.deb, all
render the system unbootable.
The boot cycle proceeds from sda1 without any errors but the tdm
signon comes up with a black background rather the normal blue TDE
one. When I logon I get an error message and TDE does not load,
showing a problem with my home partition on sda5:
Could not read connection list
/home/lsm1/.DCOPserver_LSM1_0
Please check that the "dcopserver" program is running
When I hit Enter I then get:
Could not start tdeinit, Check your installation.
This problem is specific to TDE as I can still load the backup
desktop LXQT by the usual logon from the TDE signon box.
When I boot to the console and downgrade to binutils_2.27-9_amd64.deb
everything works as usual on the reboot.
If anyone has any possible solutions I'd be happy to try them out and
report back.
Hi there,
when binutils is updated, it is necessary to rebuild (or use a rebuilt
version of) "dependencies/libr". Without doing so, trying to update
binutils will raise a conflict with tdelibs which in turns brings up a
long list of packages that needs to be "removed". After rebuilding and
installing the new libr, binutils can be updated without problem.
for those using TDE on Sid/stretch you have two choices:
1) if you are building TDE yuorselves, just rebuild and install libr
2) if you are using preliminary stable builds from Slavek's repo, wait
until libr is rebuilt and then update binutils at the same time.
After doing all that, I think you will not run into the issue mentioned
by McCarty. If you do so, just rebuild and reinstall tdelibs as well
from CLI.
Just for info, from time to time I run into the same issue (last time
was a few weeks ago) and rebuilding as described has always fixed the
problem so far (I think libr is enough, but since I do not remember
100% I also recommended tdelibs is the problem persists).
Cheers
Michele
I can confirm that the rebuild 'libr' is sufficient. Previously it was
dependent on binutils also tdebase == was necessary to rebuild tdebase.
However, for R14.0.x this is no longer valid.
I try to update 'libr' in preliminary stable builds repository as soon as
I notice a change binutils in the Debian repository. However, then it is
essential that users have properly updated lists from preliminary stable
builds repository. Without that, it just can not work smoothly.
Cheers
Thanks to all for the comprehensive advice. I usually find important
things through questions from others so I don't have to ask too many
things myself.
I updated to R14.0.5 PSB (I usually track PSB but just hadn't got to
it). Then I tried both of the latest binutils versions, debian testing
and unstable. The problem remains exactly as before. Is there any
further info I can provide?
Cheers!
Siduction is based on Debian Sid. Therefore, for Trinity should be apt line as
follows:
deb http://mirror.xcer.cz/trinity-sb sid deps-r14 main-r14
Current version of binutils in Sid is 2.27.90.20161231-1. For this binutils
version is in deps-r14 corresponding libr0 version 4:0.6.0-3debian9.0.0+4~b7.
Please verify (for example, by aptitude), whether you have available just
these versions.
Slaveck,
Thanks for your usual excellent advice. Our messages are crossing out of
sync. After receiving a series of helpful messages I noted how I
resolved the problem a little while ago, marking the msessage RESOLVED.
I can confirm that the matching pairs of binutils and libr0 in both the
testing (stretch) and unstable (Sid) repositories work with Trinity
R14.0.5 and Siduction. I'm currently using the Sid versions.
I greatly appreciate you help and continued work on Trinity.
--
SENT BY: Lynn McCarty
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe@xxxxxxxxxxxxxxxxxxxxxxxxxx
For additional commands, e-mail: trinity-users-help@xxxxxxxxxxxxxxxxxxxxxxxxxx
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
