Why not? What's supposed to control whether any notification occurs that a USB
stick or HD has been inserted? Are udisks and udisks2 incompatible with each
other? Purging udisks didn't help. Fdisk finds them. Blkid finds too.
I asked about this in February, but got no resolution. :-(
http://trinity-devel.pearsoncomputing.net/?0::15361
--
"The wise are known for their understanding, and pleasant
words are persuasive." Proverbs 16:21 (New Living Translation)
Team OS/2 ** Reg. Linux User #211409 ** a11y rocks!
Felix Miata *** http://fm.no-ip.com/
# dpkg -l | egrep 'udisk|debase'
ii libudisks2-0:amd64 2.1.8-1 amd64 GObject based library to access udisks2
ii tdebase-data-trinity 4:14.0.4-0debian8.0.0+0 all shared data files for the TDE base module
ii tdebase-runtime-data-common-trinity 4:14.0.4-0debian8.0.0+0 all Shared common files for Trinity and KDE4
ii tdebase-tdeio-plugins-trinity 4:14.0.4-0debian8.0.0+0 amd64 core I/O slaves for TDE
ii tdebase-trinity-bin 4:14.0.4-0debian8.0.0+0 amd64 core binaries for the TDE base module
ii udisks 1.0.5-1+b1 amd64 storage media interface
ii udisks2 2.1.8-1 amd64 D-Bus service to access and manipulate storage devices
# fdisk -l /dev/sdb
Disk /dev/sdb: 30 GiB, 32262586368 bytes, 63012864 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/sdb1 32 63012863 63012832 30G c W95 FAT32 (LBA)
# blkid /dev/sdb1
/dev/sdb1: LABEL="32G201502" UUID="0012-D687" TYPE="vfat"
# dmesg | grep sdb
[ 2115.660795] sd 8:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
[ 2115.662333] sd 8:0:0:0: [sdb] Write Protect is off
[ 2115.662335] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2115.663542] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2115.671929] sdb: sdb1
[ 2115.676170] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 2170.204036] sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2170.204040] sd 8:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 01 ce 7d 28 00 00 30 00
[ 2170.204043] blk_update_request: I/O error, dev sdb, sector 30309672
[ 2170.204080] sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2170.204083] sd 8:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 01 ce 7d 60 00 00 50 00
[ 2170.204084] blk_update_request: I/O error, dev sdb, sector 30309728
[ 2273.319646] sd 8:0:0:0: [sdb] 63012864 512-byte logical blocks: (32.3 GB/30.0 GiB)
[ 2273.320585] sd 8:0:0:0: [sdb] Write Protect is off
[ 2273.320587] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2273.321274] sd 8:0:0:0: [sdb] No Caching mode page found
[ 2273.321275] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2273.328033] sdb: sdb1
[ 2273.331773] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-1 (2017-06-04)
[ 0.000000] Command line: root=LABEL=21deb9 ipv6.disable=1 net.ifnames=0 noresume vga=791 video=1024x768@60 video=1440x900@60 5
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd9ffbff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd9ffc00-0x00000000bda53bff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bda53c00-0x00000000bda55bff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bda55c00-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 780 /03NVJ6, BIOS A15 08/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0BDC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 0BDB00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbd9ff max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8fdc000fe710]
[ 0.000000] Base memory trampoline at [ffff8fdc00098000] 98000 size 24576
[ 0.000000] BRK [0x16f12e000, 0x16f12efff] PGTABLE
[ 0.000000] BRK [0x16f12f000, 0x16f12ffff] PGTABLE
[ 0.000000] BRK [0x16f130000, 0x16f130fff] PGTABLE
[ 0.000000] BRK [0x16f131000, 0x16f131fff] PGTABLE
[ 0.000000] BRK [0x16f132000, 0x16f132fff] PGTABLE
[ 0.000000] BRK [0x16f133000, 0x16f133fff] PGTABLE
[ 0.000000] BRK [0x16f134000, 0x16f134fff] PGTABLE
[ 0.000000] BRK [0x16f135000, 0x16f135fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36daa000-0x37feffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FEC00 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000000FC7F2 00008C (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000000FC922 0000F4 (v03 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20160831/tbfadt-603)
[ 0.000000] ACPI: DSDT 0x00000000FFEA3664 005035 (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: FACS 0x00000000BD9FFC00 000040
[ 0.000000] ACPI: FACS 0x00000000BD9FFC00 000040
[ 0.000000] ACPI: SSDT 0x00000000FFEA8699 000099 (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 0x00000000000FCA16 000092 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT 0x00000000000FCAA8 000028 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: ASF! 0x00000000000FCAD0 000096 (v32 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG 0x00000000000FCB66 00003C (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: HPET 0x00000000000FCBA2 000038 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA 0x00000000000FCDFE 000032 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: DMAR 0x00000000000FCE30 000120 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: SLIC 0x00000000000FCBDA 000176 (v01 DELL B10K 00000015 ASL 00000061)
[ 0.000000] ACPI: SSDT 0x00000000BD9FFC40 0001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x00000000BDA00049 0001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x00000000BDA00452 000190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x237ff7000-0x237ffbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000237ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bd9fefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000237ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff]
[ 0.000000] On node 0 totalpages: 2054556
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12072 pages used for memmap
[ 0.000000] DMA32 zone: 772607 pages, LIFO batch:31
[ 0.000000] Normal zone: 19968 pages used for memmap
[ 0.000000] Normal zone: 1277952 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd9ff000-0xbd9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbda00000-0xbda52fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbda53000-0xbda53fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbda54000-0xbda54fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbda55000-0xbda55fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbda56000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8fde37c00000 s103512 r8192 d31656 u262144
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2022431
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=LABEL=21deb9 ipv6.disable=1 net.ifnames=0 noresume vga=791 video=1024x768@60 video=1440x900@60 5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7987644K/8218224K available (6183K kernel code, 1136K rwdata, 2852K rodata, 1392K init, 688K bss, 230580K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2992.667 MHz processor
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.33 BogoMIPS (lpj=11970668)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004042] ACPI: Core revision 20160831
[ 0.084220] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.084288] Security Framework initialized
[ 0.084293] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.084302] AppArmor: AppArmor disabled by boot time parameter
[ 0.084772] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.087846] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.089390] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.089403] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.089791] CPU: Physical Processor ID: 0
[ 0.089795] CPU: Processor Core ID: 0
[ 0.089799] mce: CPU supports 6 MCE banks
[ 0.089808] CPU0: Thermal monitoring enabled (TM1)
[ 0.089814] process: using mwait in idle threads
[ 0.089821] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.089824] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.090107] Freeing SMP alternatives memory: 24K (ffffffffbde7a000 - ffffffffbde80000)
[ 0.092006] ftrace: allocating 25146 entries in 99 pages
[ 0.100074] smpboot: Max logical packages: 4
[ 0.100085] DMAR: Host address width 36
[ 0.100088] DMAR: DRHD base: 0x000000fedc1000 flags: 0x0
[ 0.100096] DMAR: dmar0: reg_base_addr fedc1000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.100102] DMAR: DRHD base: 0x000000fedc2000 flags: 0x0
[ 0.100108] DMAR: dmar1: reg_base_addr fedc2000 ver 1:0 cap c0000020630272 ecap 1000
[ 0.100113] DMAR: DRHD base: 0x000000fedc3000 flags: 0x0
[ 0.100119] DMAR: dmar2: reg_base_addr fedc3000 ver 1:0 cap c0000020630272 ecap 1000
[ 0.100124] DMAR: DRHD base: 0x000000fedc4000 flags: 0x1
[ 0.100130] DMAR: dmar3: reg_base_addr fedc4000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.100135] DMAR: RMRR base: 0x000000bda58000 end: 0x000000bda6ffff
[ 0.100139] DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[ 0.100502] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.144000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.144000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.144000] ... version: 2
[ 0.144000] ... bit width: 40
[ 0.144000] ... generic registers: 2
[ 0.144000] ... value mask: 000000ffffffffff
[ 0.144000] ... max period: 000000007fffffff
[ 0.144000] ... fixed-purpose events: 3
[ 0.144000] ... event mask: 0000000700000003
[ 0.144000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.144000] x86: Booting SMP configuration:
[ 0.144000] .... node #0, CPUs: #1
[ 0.222020] x86: Booted up 1 node, 2 CPUs
[ 0.222020] smpboot: Total of 2 processors activated (11970.23 BogoMIPS)
[ 0.224343] devtmpfs: initialized
[ 0.224343] x86/mm: Memory block size: 128MB
[ 0.228002] PM: Registering ACPI NVS region [mem 0xbd9ffc00-0xbda53bff] (344064 bytes)
[ 0.228003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.228003] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.228003] pinctrl core: initialized pinctrl subsystem
[ 0.228003] NET: Registered protocol family 16
[ 0.236004] cpuidle: using governor ladder
[ 0.248003] cpuidle: using governor menu
[ 0.248044] Simple Boot Flag at 0x7a set to 0x1
[ 0.248057] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.248066] ACPI: bus type PCI registered
[ 0.248070] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.248161] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.248170] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.248185] PCI: Using configuration type 1 for base access
[ 0.248200] dmi type 0xB1 record - unknown flag
[ 0.260050] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.260053] ACPI: Added _OSI(Module Device)
[ 0.260057] ACPI: Added _OSI(Processor Device)
[ 0.260060] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.260063] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.299136] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.334395] ACPI: Interpreter enabled
[ 0.334413] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.334417] ACPI: Using IOAPIC for interrupt routing
[ 0.334528] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.498629] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.498629] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.498629] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.498629] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.506143] PCI host bridge to bus 0000:00
[ 0.506148] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.506152] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.506156] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.506162] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window]
[ 0.506167] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.506172] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfec00000 window]
[ 0.506178] pci_bus 0000:00: root bus resource [mem 0xbdb00000-0xf7ffffff window]
[ 0.506183] pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff window]
[ 0.506188] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff window]
[ 0.506193] pci_bus 0000:00: root bus resource [mem 0xff970000-0xff9707ff window]
[ 0.506199] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff window]
[ 0.506204] pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff window]
[ 0.506209] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff window]
[ 0.506215] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.506224] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
[ 0.506241] DMAR: Forcing write-buffer flush capability
[ 0.506244] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.506570] pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
[ 0.506598] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.506888] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.506929] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
[ 0.506937] pci 0000:00:02.0: reg 0x10: [mem 0xf7c00000-0xf7ffffff 64bit]
[ 0.506941] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.506945] pci 0000:00:02.0: reg 0x20: [io 0xecb0-0xecb7]
[ 0.507277] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
[ 0.507283] pci 0000:00:02.1: reg 0x10: [mem 0xf7b00000-0xf7bfffff 64bit]
[ 0.507624] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
[ 0.507646] pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit]
[ 0.507729] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.508062] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
[ 0.508081] pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87]
[ 0.508091] pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93]
[ 0.508100] pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7]
[ 0.508110] pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3]
[ 0.508120] pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff]
[ 0.508503] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
[ 0.508521] pci 0000:00:03.3: reg 0x10: [io 0xecb8-0xecbf]
[ 0.508531] pci 0000:00:03.3: reg 0x14: [mem 0xf7ad8000-0xf7ad8fff]
[ 0.508953] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
[ 0.508965] pci 0000:00:19.0: reg 0x10: [mem 0xf7ae0000-0xf7afffff]
[ 0.508971] pci 0000:00:19.0: reg 0x14: [mem 0xf7ad9000-0xf7ad9fff]
[ 0.508977] pci 0000:00:19.0: reg 0x18: [io 0xece0-0xecff]
[ 0.509025] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.509346] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
[ 0.509380] pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
[ 0.509698] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.509741] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
[ 0.509774] pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
[ 0.510091] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.510134] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
[ 0.510167] pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.510484] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.510532] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
[ 0.510547] pci 0000:00:1a.7: reg 0x10: [mem 0xf7ada000-0xf7ada3ff]
[ 0.510616] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.510943] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
[ 0.510955] pci 0000:00:1b.0: reg 0x10: [mem 0xf7adc000-0xf7adffff 64bit]
[ 0.511013] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.511339] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
[ 0.511395] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.511729] pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
[ 0.511784] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.512079] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.512127] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
[ 0.512160] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
[ 0.512477] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.512520] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
[ 0.512553] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
[ 0.512870] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.512913] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
[ 0.512946] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
[ 0.513262] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.513310] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
[ 0.513325] pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
[ 0.513394] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.513717] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.514039] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.514084] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
[ 0.514487] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
[ 0.514499] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
[ 0.514505] pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
[ 0.514511] pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
[ 0.514517] pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
[ 0.514523] pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
[ 0.514529] pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
[ 0.514561] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.514882] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
[ 0.514894] pci 0000:00:1f.3: reg 0x10: [mem 0xf7adb000-0xf7adb0ff 64bit]
[ 0.514910] pci 0000:00:1f.3: reg 0x20: [io 0x0980-0x099f]
[ 0.515265] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.515271] pci 0000:00:01.0: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.515309] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.515316] pci 0000:00:1c.0: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.515357] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.515364] pci 0000:00:1c.1: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.515426] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.515436] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.515437] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.515438] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.515439] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff window] (subtractive decode)
[ 0.515441] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.515442] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfec00000 window] (subtractive decode)
[ 0.515443] pci 0000:00:1e.0: bridge window [mem 0xbdb00000-0xf7ffffff window] (subtractive decode)
[ 0.515445] pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff window] (subtractive decode)
[ 0.515446] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff window] (subtractive decode)
[ 0.515447] pci 0000:00:1e.0: bridge window [mem 0xff970000-0xff9707ff window] (subtractive decode)
[ 0.515448] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff window] (subtractive decode)
[ 0.515449] pci 0000:00:1e.0: bridge window [mem 0xfeda6000-0xfeda6fff window] (subtractive decode)
[ 0.515451] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff window] (subtractive decode)
[ 0.547163] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.548301] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.549183] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.550056] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.550958] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.551833] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.552715] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.553601] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.554225] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.556008] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.556009] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.556017] vgaarb: loaded
[ 0.556020] vgaarb: bridge control possible 0000:00:02.0
[ 0.556079] PCI: Using ACPI for IRQ routing
[ 0.557226] PCI: pci_cache_line_size set to 64 bytes
[ 0.557270] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.557274] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.557278] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[ 0.557279] e820: reserve RAM buffer [mem 0xbd9ffc00-0xbfffffff]
[ 0.557381] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.557381] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 0.557381] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.557381] hpet: hpet2 irq 24 for MSI
[ 0.557381] hpet: hpet3 irq 25 for MSI
[ 0.557381] clocksource: Switched to clocksource hpet
[ 0.562986] VFS: Disk quotas dquot_6.6.0
[ 0.563022] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.563111] pnp: PnP ACPI init
[ 0.567191] system 00:00: [io 0x0800-0x085f] has been reserved
[ 0.567195] system 00:00: [io 0x0c00-0x0c7f] has been reserved
[ 0.567200] system 00:00: [io 0x0860-0x08ff] has been reserved
[ 0.567206] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.567431] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.572122] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.583696] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.589326] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.604702] pnp: PnP ACPI: found 5 devices
[ 0.611312] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.611332] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.611334] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.611340] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.611342] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.611351] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.611352] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.611354] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.611355] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.611357] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.611358] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.611359] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.611361] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.611370] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.611379] pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.611385] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.611389] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.611394] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.611399] pci 0000:00:01.0: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.611406] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.611410] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.611416] pci 0000:00:1c.0: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.611421] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.611429] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.611433] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.611439] pci 0000:00:1c.1: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.611444] pci 0000:00:1c.1: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.611453] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.611464] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.611465] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.611466] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.611467] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window]
[ 0.611469] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window]
[ 0.611470] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000 window]
[ 0.611471] pci_bus 0000:00: resource 10 [mem 0xbdb00000-0xf7ffffff window]
[ 0.611472] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff window]
[ 0.611473] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff window]
[ 0.611474] pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff window]
[ 0.611475] pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff window]
[ 0.611477] pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff window]
[ 0.611478] pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff window]
[ 0.611479] pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.611481] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.611482] pci_bus 0000:02: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.611483] pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.611484] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.611485] pci_bus 0000:03: resource 1 [mem 0xf7700000-0xf77fffff]
[ 0.611486] pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.611488] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.611489] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.611490] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.611491] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff window]
[ 0.611492] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff window]
[ 0.611494] pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000 window]
[ 0.611495] pci_bus 0000:04: resource 10 [mem 0xbdb00000-0xf7ffffff window]
[ 0.611496] pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff window]
[ 0.611497] pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff window]
[ 0.611498] pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff window]
[ 0.611499] pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff window]
[ 0.611500] pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff window]
[ 0.611502] pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff window]
[ 0.611559] NET: Registered protocol family 2
[ 0.611749] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.611951] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.612289] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.612330] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.612379] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.612470] NET: Registered protocol family 1
[ 0.612489] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.618009] PCI: CLS 64 bytes, default 64
[ 0.618051] Unpacking initramfs...
[ 0.908763] Freeing initrd memory: 18712K (ffff8fdc36daa000 - ffff8fdc37ff0000)
[ 0.908918] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.908923] software IO TLB [mem 0xb99ff000-0xbd9ff000] (64MB) mapped at [ffff8fdcb99ff000-ffff8fdcbd9fefff]
[ 0.909365] audit: initializing netlink subsys (disabled)
[ 0.909392] audit: type=2000 audit(1497200065.908:1): initialized
[ 0.909763] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.909792] zbud: loaded
[ 0.910373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.910402] io scheduler noop registered
[ 0.910406] io scheduler deadline registered
[ 0.910429] io scheduler cfq registered (default)
[ 0.911767] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.911775] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.911788] vesafb: mode is 1024x768x16, linelength=2048, pages=20
[ 0.911791] vesafb: scrolling: redraw
[ 0.911795] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.911807] vesafb: framebuffer at 0xe0000000, mapped to 0xffffaa0e01000000, using 3072k, total 32704k
[ 0.921537] Console: switching to colour frame buffer device 128x48
[ 0.931251] fb0: VESA VGA frame buffer device
[ 0.931343] intel_idle: does not run on family 6 model 23
[ 0.933237] Monitor-Mwait will be used to enter C-1 state
[ 0.935183] GHES: HEST is not enabled!
[ 0.935303] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.955846] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.976403] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.997183] 0000:00:03.3: ttyS2 at I/O 0xecb8 (irq = 17, base_baud = 115200) is a 16550A
[ 0.997652] Linux agpgart interface v0.103
[ 0.997840] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
[ 0.997950] AMD IOMMUv2 functionality not available on this system
[ 0.998219] i8042: PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[ 0.998342] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.999323] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.999515] mousedev: PS/2 mouse device common for all mice
[ 0.999654] rtc_cmos 00:01: RTC can wake from S4
[ 0.999844] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.999975] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[ 1.000134] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.000739] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 1.000878] mip6: Mobile IPv6
[ 1.000933] mip6: mip6_init: can't add xfrm type(destopt)
[ 1.001033] NET: Registered protocol family 17
[ 1.001119] mpls_gso: MPLS GSO support
[ 1.001320] microcode: sig=0x1067a, pf=0x1, revision=0xa0c
[ 1.005534] microcode: Microcode Update Driver: v2.01 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.009915] registered taskstats version 1
[ 1.014166] zswap: loaded using pool lzo/zbud
[ 1.018433] ima: No TPM chip found, activating TPM-bypass!
[ 1.022910] rtc_cmos 00:01: setting system clock to 2017-06-11 16:54:26 UTC (1497200066)
[ 1.028499] Freeing unused kernel memory: 1392K (ffffffffbdd1e000 - ffffffffbde7a000)
[ 1.032773] Write protecting the kernel read-only data: 12288k
[ 1.037719] Freeing unused kernel memory: 1992K (ffff8fdd6e80e000 - ffff8fdd6ea00000)
[ 1.044653] Freeing unused kernel memory: 1244K (ffff8fdd6ecc9000 - ffff8fdd6ee00000)
[ 1.053748] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.054634] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.081317] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.082124] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.082154] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.083206] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.083220] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.083535] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.083592] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.083646] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.083702] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.083757] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.132778] SCSI subsystem initialized
[ 1.136562] pps_core: LinuxPPS API ver. 1 registered
[ 1.140306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 1.145416] libata version 3.00 loaded.
[ 1.146075] ACPI: bus type USB registered
[ 1.146296] scsi host0: ata_generic
[ 1.146374] scsi host1: ata_generic
[ 1.146417] ata1: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
[ 1.146418] ata2: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
[ 1.165009] PTP clock support registered
[ 1.171539] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.175283] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.179429] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.183736] usbcore: registered new interface driver usbfs
[ 1.187521] usbcore: registered new interface driver hub
[ 1.191228] usbcore: registered new device driver usb
[ 1.195352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.199618] ehci-pci: EHCI PCI platform driver
[ 1.203497] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.400275] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) a4:ba:db:ee:1e:a2
[ 1.403952] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.407625] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: 2021FF-0FF
[ 1.411274] ahci 0000:00:1f.2: version 3.0
[ 1.411731] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA mode
[ 1.415457] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems sxs
[ 1.452657] scsi host2: ahci
[ 1.456429] scsi host3: ahci
[ 1.460081] scsi host4: ahci
[ 1.463610] scsi host5: ahci
[ 1.467098] scsi host6: ahci
[ 1.471850] scsi host7: ahci
[ 1.475100] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 33
[ 1.478361] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 33
[ 1.481513] ata5: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 33
[ 1.484578] ata6: DUMMY
[ 1.487604] ata7: DUMMY
[ 1.490527] ata8: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 33
[ 1.493939] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.496884] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.499894] ehci-pci 0000:00:1a.7: debug port 1
[ 1.506682] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.506716] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ada000
[ 1.524024] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.527048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.530063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.533169] usb usb1: Product: EHCI Host Controller
[ 1.536315] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.539540] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.542918] hub 1-0:1.0: USB hub found
[ 1.546232] hub 1-0:1.0: 6 ports detected
[ 1.550087] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.553436] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.556829] ehci-pci 0000:00:1d.7: debug port 1
[ 1.563995] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.564011] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
[ 1.580122] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.583349] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.586643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.589918] usb usb2: Product: EHCI Host Controller
[ 1.593235] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.596542] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.599920] hub 2-0:1.0: USB hub found
[ 1.600007] random: fast init done
[ 1.606320] hub 2-0:1.0: 6 ports detected
[ 1.609916] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.613133] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.616374] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.619563] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 1.622742] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.625922] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.629055] usb usb3: Product: UHCI Host Controller
[ 1.632155] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.635274] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.638419] hub 3-0:1.0: USB hub found
[ 1.641426] hub 3-0:1.0: 2 ports detected
[ 1.644805] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.647840] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.650978] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.654154] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 1.657393] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.660708] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.663995] usb usb4: Product: UHCI Host Controller
[ 1.667325] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.670730] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.674190] hub 4-0:1.0: USB hub found
[ 1.677582] hub 4-0:1.0: 2 ports detected
[ 1.681327] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.684645] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.687995] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.691317] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
[ 1.694678] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.698081] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.701463] usb usb5: Product: UHCI Host Controller
[ 1.704825] usb usb5: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.708186] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.711612] hub 5-0:1.0: USB hub found
[ 1.714931] hub 5-0:1.0: 2 ports detected
[ 1.718640] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.721994] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.725384] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.728739] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 1.732109] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.735510] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.738953] usb usb6: Product: UHCI Host Controller
[ 1.742344] usb usb6: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.745756] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.749238] hub 6-0:1.0: USB hub found
[ 1.752578] hub 6-0:1.0: 2 ports detected
[ 1.756320] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.759657] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.763058] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.766442] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 1.769838] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.773250] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.776670] usb usb7: Product: UHCI Host Controller
[ 1.780091] usb usb7: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.783495] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.787009] hub 7-0:1.0: USB hub found
[ 1.790346] hub 7-0:1.0: 2 ports detected
[ 1.794066] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.797397] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.800775] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.804163] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 1.807555] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.810973] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.814395] usb usb8: Product: UHCI Host Controller
[ 1.815308] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.815324] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.815335] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.821263] ata3.00: ATA-8: ST3750525AS, JC4B, max UDMA/133
[ 1.821264] ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.822227] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.824807] ata3.00: configured for UDMA/133
[ 1.824967] scsi 2:0:0:0: Direct-Access ATA ST3750525AS JC4B PQ: 0 ANSI: 5
[ 1.827982] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L633J, D200, max UDMA/100
[ 1.844945] ata4.00: configured for UDMA/100
[ 1.851934] usb usb8: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.855480] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.859128] hub 8-0:1.0: USB hub found
[ 1.862594] hub 8-0:1.0: 2 ports detected
[ 1.866444] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.878366] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633J D200 PQ: 0 ANSI: 5
[ 1.899822] sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 1.903460] sd 2:0:0:0: [sda] Write Protect is off
[ 1.907046] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.907061] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.920014] tsc: Refined TSC clocksource calibration: 2992.481 MHz
[ 1.923727] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b228661c25, max_idle_ns: 440795245102 ns
[ 1.931113] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.935063] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.939061] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.116017] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 2.191086] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 >
[ 2.201681] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.310036] usb 3-2: New USB device found, idVendor=046d, idProduct=c408
[ 2.314234] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.318442] usb 3-2: Product: USB Trackball
[ 2.322614] usb 3-2: Manufacturer: Logitech
[ 2.330521] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.350277] usbcore: registered new interface driver usbhid
[ 2.354497] usbhid: USB HID core driver
[ 2.359162] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/0003:046D:C408.0001/input/input1
[ 2.367920] hid-generic 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.0-2/input0
[ 2.944085] clocksource: Switched to clocksource tsc
[ 4.320031] floppy0: no floppy controllers found
[ 5.003286] random: crng init done
[ 5.455637] EXT4-fs (sda21): mounting ext3 file system using the ext4 subsystem
[ 5.479856] EXT4-fs (sda21): mounted filesystem with ordered data mode. Opts: (null)
[ 6.909510] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
[ 7.244323] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.299750] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 7.310383] systemd[1]: Detected architecture x86-64.
[ 7.364056] systemd[1]: Set hostname to <myhost>.
[ 7.499503] systemd-fstab-generator[185]: Failed to create mount unit file /run/systemd/generator/disks-stw.mount, as it already exists. Duplicate entry in /etc/fstab?
[ 7.632031] systemd[177]: /lib/systemd/system-generators/systemd-fstab-generator failed with error code 1.
[ 8.259142] systemd[1]: Listening on udev Kernel Socket.
[ 8.270015] systemd[1]: Created slice System Slice.
[ 8.280934] systemd[1]: Mounting RPC Pipe File System...
[ 8.291684] systemd[1]: Mounting Debug File System...
[ 8.302030] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.312668] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.712779] EXT4-fs (sda21): re-mounted. Opts: errors=remount-ro
[ 8.957892] systemd-journald[194]: Received request to flush runtime journal from PID 1
[ 9.083079] RPC: Registered named UNIX socket transport module.
[ 9.087052] RPC: Registered udp transport module.
[ 9.090971] RPC: Registered tcp transport module.
[ 9.094823] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.193705] lp: driver loaded but no devices found
[ 9.220221] ppdev: user-space parallel port driver
[ 9.800807] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 10.588551] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 10.588554] ACPI: Power Button [VBTN]
[ 10.588615] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 10.588617] ACPI: Power Button [PWRF]
[ 10.629489] wmi: Mapper loaded
[ 10.905260] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 10.905293] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 10.920631] [drm] Initialized
[ 10.954317] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.133479] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20160831/utaddress-247)
[ 11.133483] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20160831/utaddress-247)
[ 11.133486] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20160831/utaddress-247)
[ 11.133489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.133491] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x00000000000008B8-0x00000000000008BB (\GIC2) (20160831/utaddress-247)
[ 11.133493] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.133494] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x000000000000088C-0x000000000000088F (\GIC1) (20160831/utaddress-247)
[ 11.133497] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.133522] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.153979] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 11.275577] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 11.347673] pci 0000:00:00.0: Intel Q45/Q43 Chipset
[ 11.347685] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 11.348812] pci 0000:00:00.0: detected 32768K stolen memory
[ 11.348841] [drm] Memory usable by graphics device = 2048M
[ 11.348844] checking generic (e0000000 1ff0000) vs hw (e0000000 10000000)
[ 11.348845] fb: switching to inteldrmfb from VESA VGA
[ 11.348881] Console: switching to colour dummy device 80x25
[ 11.348979] [drm] Replacing VGA console driver
[ 11.355086] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.355087] [drm] Driver supports precise vblank timestamp query.
[ 11.355331] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.357256] [drm] RC6 disabled, disabling runtime PM support
[ 11.415063] dell_wmi: Detected Dell WMI interface version 1
[ 11.415111] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 11.460496] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 11.480321] iTCO_vendor_support: vendor-support=0
[ 11.504605] fbcon: inteldrmfb (fb0) is primary device
[ 11.519826] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.519862] iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0x0860)
[ 11.519985] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.554795] [drm:i965_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 11.554853] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in has_audio (expected 1, found 0)
[ 11.554854] ------------[ cut here ]------------
[ 11.554891] WARNING: CPU: 0 PID: 113 at /build/linux-cKfWAz/linux-4.9.30/drivers/gpu/drm/i915/intel_display.c:13624 intel_atomic_commit_tail+0xced/0xf50 [i915]
[ 11.554892] pipe state doesn't match!
[ 11.554923] Modules linked in: iTCO_wdt iTCO_vendor_support serio_raw snd_hda_core dell_wmi irqbypass snd_hwdep sparse_keymap dell_smbios i915 evdev dcdbas snd_pcm pcspkr lpc_ich snd_timer video mei_me mfd_core mei snd drm_kms_helper shpchp drm sg soundcore i2c_algo_bit floppy(+) wmi button acpi_cpufreq nfsd auth_rpcgss oid_registry nfs_acl lockd parport_pc ppdev grace sunrpc lp parport ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache hid_generic usbhid hid sr_mod cdrom sd_mod i2c_i801 i2c_smbus uhci_hcd ehci_pci ehci_hcd ahci libahci e1000e ptp ata_generic usbcore libata usb_common pps_core scsi_mod
[ 11.554926] CPU: 0 PID: 113 Comm: kworker/u16:5 Not tainted 4.9.0-3-amd64 #1 Debian 4.9.30-1
[ 11.554926] Hardware name: Dell Inc. OptiPlex 780 /03NVJ6, BIOS A15 08/06/2013
[ 11.554936] Workqueue: events_unbound async_run_entry_fn
[ 11.554938] 0000000000000000 ffffffffbd328634 ffffaa0e013bf938 0000000000000000
[ 11.554939] ffffffffbd076eae ffff8fde2c73c800 ffffaa0e013bf990 ffff8fde2c73c800
[ 11.554941] ffff8fde2a107800 0000000000000000 ffff8fde28ef0000 ffffffffbd076f2f
[ 11.554941] Call Trace:
[ 11.554945] [<ffffffffbd328634>] ? dump_stack+0x5c/0x78
[ 11.554947] [<ffffffffbd076eae>] ? __warn+0xbe/0xe0
[ 11.554948] [<ffffffffbd076f2f>] ? warn_slowpath_fmt+0x5f/0x80
[ 11.554972] [<ffffffffc05ecdc6>] ? intel_dp_get_config+0xc6/0x1c0 [i915]
[ 11.554996] [<ffffffffc05c798d>] ? intel_atomic_commit_tail+0xced/0xf50 [i915]
[ 11.554998] [<ffffffffbd0b8d40>] ? prepare_to_wait_event+0xf0/0xf0
[ 11.555022] [<ffffffffc05c7f45>] ? intel_atomic_commit+0x355/0x4c0 [i915]
[ 11.555033] [<ffffffffc04f675c>] ? restore_fbdev_mode+0x14c/0x270 [drm_kms_helper]
[ 11.555052] [<ffffffffc0468a40>] ? drm_modeset_lock_all_ctx+0xa0/0xb0 [drm]
[ 11.555057] [<ffffffffc04f826e>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [drm_kms_helper]
[ 11.555061] [<ffffffffc04f82d9>] ? drm_fb_helper_set_par+0x29/0x50 [drm_kms_helper]
[ 11.555084] [<ffffffffc05e19f3>] ? intel_fbdev_set_par+0x13/0x60 [i915]
[ 11.555086] [<ffffffffbd39eae0>] ? fbcon_init+0x570/0x600
[ 11.555089] [<ffffffffbd42675f>] ? visual_init+0xcf/0x130
[ 11.555090] [<ffffffffbd427d6f>] ? do_bind_con_driver+0x1cf/0x3b0
[ 11.555091] [<ffffffffbd42827e>] ? do_take_over_console+0x10e/0x170
[ 11.555092] [<ffffffffbd39aac8>] ? do_fbcon_takeover+0x58/0xb0
[ 11.555094] [<ffffffffbd097c35>] ? notifier_call_chain+0x45/0x70
[ 11.555095] [<ffffffffbd097f41>] ? __blocking_notifier_call_chain+0x41/0x60
[ 11.555097] [<ffffffffbd3a6d62>] ? register_framebuffer+0x212/0x360
[ 11.555099] [<ffffffffbd46ba29>] ? vga_switcheroo_client_fb_set+0x19/0x70
[ 11.555103] [<ffffffffc04f859e>] ? drm_fb_helper_initial_config+0x29e/0x440 [drm_kms_helper]
[ 11.555127] [<ffffffffc05e2aa4>] ? intel_fbdev_initial_config+0x14/0x30 [i915]
[ 11.555128] [<ffffffffbd0994c4>] ? async_run_entry_fn+0x34/0x140
[ 11.555129] [<ffffffffbd090374>] ? process_one_work+0x184/0x410
[ 11.555130] [<ffffffffbd09064d>] ? worker_thread+0x4d/0x480
[ 11.555131] [<ffffffffbd090600>] ? process_one_work+0x410/0x410
[ 11.555132] [<ffffffffbd0965c7>] ? kthread+0xd7/0xf0
[ 11.555134] [<ffffffffbd0964f0>] ? kthread_park+0x60/0x60
[ 11.555136] [<ffffffffbd6054b5>] ? ret_from_fork+0x25/0x30
[ 11.555137] ---[ end trace 9d52092261eae8d2 ]---
[ 11.604827] Console: switching to colour frame buffer device 180x56
[ 11.622865] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 11.979635] intel_powerclamp: No package C-state available
[ 12.008247] intel_powerclamp: No package C-state available
[ 13.004167] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1984A: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 13.004169] snd_hda_codec_analog hdaudioC0D2: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 13.004170] snd_hda_codec_analog hdaudioC0D2: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 13.004171] snd_hda_codec_analog hdaudioC0D2: mono: mono_out=0x0
[ 13.004172] snd_hda_codec_analog hdaudioC0D2: inputs:
[ 13.004174] snd_hda_codec_analog hdaudioC0D2: Mic=0x14
[ 13.004175] snd_hda_codec_analog hdaudioC0D2: Line=0x15
[ 13.013097] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 13.013739] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 13.013794] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.013850] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.013905] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.792031] floppy0: no floppy controllers found
[ 16.160178] Adding 4245484k swap on /dev/sda5. Priority:-1 extents:1 across:4245484k FS
[ 21.154855] fuse init (API version 7.26)
[ 23.146907] FAT-fs (sda7): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 23.751715] EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: (null)
[ 23.957934] EXT4-fs (sda16): mounted filesystem with ordered data mode. Opts: (null)
[ 23.990713] EXT4-fs (sda17): mounted filesystem with ordered data mode. Opts: (null)
[ 24.395466] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
[ 24.639607] EXT4-fs (sda22): mounted filesystem with ordered data mode. Opts: (null)
[ 24.874122] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 25.163166] EXT4-fs (sda26): mounted filesystem with ordered data mode. Opts: (null)
[ 25.221379] EXT4-fs (sda3): Mount option "noacl" will be removed by 3.5
Contact linux-ext4@xxxxxxxxxxxxxxx if you think we should keep it.
[ 25.221381] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 25.292048] EXT4-fs (sda3): mounted filesystem without journal. Opts: noacl
[ 25.922394] EXT4-fs (sda25): mounted filesystem with ordered data mode. Opts: (null)
[ 26.075603] EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: (null)
[ 26.158297] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 26.652705] EXT4-fs (sda19): mounted filesystem with ordered data mode. Opts: (null)
[ 26.689600] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 27.030475] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
[ 30.294428] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 30.313132] NFSD: starting 90-second grace period (net ffffffffbdcd6440)
[ 31.276860] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 35.647954] [drm:i965_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 35.647981] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in has_audio (expected 1, found 0)
[ 35.647983] ------------[ cut here ]------------
[ 35.648012] WARNING: CPU: 1 PID: 666 at /build/linux-cKfWAz/linux-4.9.30/drivers/gpu/drm/i915/intel_display.c:13624 intel_atomic_commit_tail+0xced/0xf50 [i915]
[ 35.648020] pipe state doesn't match!
[ 35.648021] Modules linked in: nls_ascii nls_cp437 fuse vfat fat snd_hda_codec_analog snd_hda_codec_generic coretemp kvm_intel snd_hda_intel kvm snd_hda_codec iTCO_wdt iTCO_vendor_support serio_raw snd_hda_core dell_wmi irqbypass snd_hwdep sparse_keymap dell_smbios i915 evdev dcdbas snd_pcm pcspkr lpc_ich snd_timer video mei_me mfd_core mei snd drm_kms_helper shpchp drm sg soundcore i2c_algo_bit wmi button acpi_cpufreq nfsd auth_rpcgss oid_registry nfs_acl lockd parport_pc ppdev grace sunrpc lp parport ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache hid_generic usbhid hid sr_mod cdrom sd_mod i2c_i801 i2c_smbus uhci_hcd ehci_pci ehci_hcd ahci libahci e1000e ptp ata_generic usbcore libata usb_common pps_core scsi_mod
[ 35.648087] CPU: 1 PID: 666 Comm: Xorg Tainted: G W 4.9.0-3-amd64 #1 Debian 4.9.30-1
[ 35.648088] Hardware name: Dell Inc. OptiPlex 780 /03NVJ6, BIOS A15 08/06/2013
[ 35.648090] 0000000000000000 ffffffffbd328634 ffffaa0e0179bb10 0000000000000000
[ 35.648093] ffffffffbd076eae ffff8fde2ab12000 ffffaa0e0179bb68 ffff8fde2ab12000
[ 35.648096] ffff8fde2d2c1800 0000000000000000 ffff8fde28ef0000 ffffffffbd076f2f
[ 35.648099] Call Trace:
[ 35.648105] [<ffffffffbd328634>] ? dump_stack+0x5c/0x78
[ 35.648108] [<ffffffffbd076eae>] ? __warn+0xbe/0xe0
[ 35.648111] [<ffffffffbd076f2f>] ? warn_slowpath_fmt+0x5f/0x80
[ 35.648137] [<ffffffffc05ecdc6>] ? intel_dp_get_config+0xc6/0x1c0 [i915]
[ 35.648163] [<ffffffffc05c798d>] ? intel_atomic_commit_tail+0xced/0xf50 [i915]
[ 35.648166] [<ffffffffbd0b8d40>] ? prepare_to_wait_event+0xf0/0xf0
[ 35.648192] [<ffffffffc05c7f45>] ? intel_atomic_commit+0x355/0x4c0 [i915]
[ 35.648207] [<ffffffffc04f48f9>] ? drm_atomic_helper_set_config+0x79/0xb0 [drm_kms_helper]
[ 35.648229] [<ffffffffc045d131>] ? drm_mode_set_config_internal+0x61/0x110 [drm]
[ 35.648245] [<ffffffffc045e857>] ? drm_mode_setcrtc+0x3c7/0x4a0 [drm]
[ 35.648258] [<ffffffffc0455aaa>] ? drm_ioctl+0x1ea/0x470 [drm]
[ 35.648273] [<ffffffffc045e490>] ? drm_mode_getcrtc+0x120/0x120 [drm]
[ 35.648276] [<ffffffffbd0a0844>] ? check_preempt_curr+0x74/0x80
[ 35.648279] [<ffffffffbd2161af>] ? do_vfs_ioctl+0x9f/0x600
[ 35.648280] [<ffffffffbd216784>] ? SyS_ioctl+0x74/0x80
[ 35.648284] [<ffffffffbd60523b>] ? system_call_fast_compare_end+0xc/0x9b
[ 35.648285] ---[ end trace 9d52092261eae8d3 ]---
[ 49.149883] [drm:i965_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 49.149911] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in has_audio (expected 1, found 0)
[ 49.149913] ------------[ cut here ]------------
[ 49.149946] WARNING: CPU: 0 PID: 666 at /build/linux-cKfWAz/linux-4.9.30/drivers/gpu/drm/i915/intel_display.c:13624 intel_atomic_commit_tail+0xced/0xf50 [i915]
[ 49.149949] pipe state doesn't match!
[ 49.149949] Modules linked in: nls_ascii nls_cp437 fuse vfat fat snd_hda_codec_analog snd_hda_codec_generic coretemp kvm_intel snd_hda_intel kvm snd_hda_codec iTCO_wdt iTCO_vendor_support serio_raw snd_hda_core dell_wmi irqbypass snd_hwdep sparse_keymap dell_smbios i915 evdev dcdbas snd_pcm pcspkr lpc_ich snd_timer video mei_me mfd_core mei snd drm_kms_helper shpchp drm sg soundcore i2c_algo_bit wmi button acpi_cpufreq nfsd auth_rpcgss oid_registry nfs_acl lockd parport_pc ppdev grace sunrpc lp parport ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul ablk_helper cryptd aes_x86_64 mbcache hid_generic usbhid hid sr_mod cdrom sd_mod i2c_i801 i2c_smbus uhci_hcd ehci_pci ehci_hcd ahci libahci e1000e ptp ata_generic usbcore libata usb_common pps_core scsi_mod
[ 49.150008] CPU: 0 PID: 666 Comm: Xorg Tainted: G W 4.9.0-3-amd64 #1 Debian 4.9.30-1
[ 49.150009] Hardware name: Dell Inc. OptiPlex 780 /03NVJ6, BIOS A15 08/06/2013
[ 49.150011] 0000000000000000 ffffffffbd328634 ffffaa0e0179bb10 0000000000000000
[ 49.150014] ffffffffbd076eae ffff8fde2abd4800 ffffaa0e0179bb68 ffff8fde2abd4800
[ 49.150016] ffff8fde2a5e5000 0000000000000000 ffff8fde28ef0000 ffffffffbd076f2f
[ 49.150020] Call Trace:
[ 49.150025] [<ffffffffbd328634>] ? dump_stack+0x5c/0x78
[ 49.150028] [<ffffffffbd076eae>] ? __warn+0xbe/0xe0
[ 49.150030] [<ffffffffbd076f2f>] ? warn_slowpath_fmt+0x5f/0x80
[ 49.150052] [<ffffffffc05ecdc6>] ? intel_dp_get_config+0xc6/0x1c0 [i915]
[ 49.150075] [<ffffffffc05c798d>] ? intel_atomic_commit_tail+0xced/0xf50 [i915]
[ 49.150077] [<ffffffffbd0b8d40>] ? prepare_to_wait_event+0xf0/0xf0
[ 49.150100] [<ffffffffc05c7f45>] ? intel_atomic_commit+0x355/0x4c0 [i915]
[ 49.150112] [<ffffffffc04f48f9>] ? drm_atomic_helper_set_config+0x79/0xb0 [drm_kms_helper]
[ 49.150131] [<ffffffffc045d131>] ? drm_mode_set_config_internal+0x61/0x110 [drm]
[ 49.150144] [<ffffffffc045e857>] ? drm_mode_setcrtc+0x3c7/0x4a0 [drm]
[ 49.150156] [<ffffffffc0455aaa>] ? drm_ioctl+0x1ea/0x470 [drm]
[ 49.150169] [<ffffffffc045e490>] ? drm_mode_getcrtc+0x120/0x120 [drm]
[ 49.150171] [<ffffffffbd2161af>] ? do_vfs_ioctl+0x9f/0x600
[ 49.150172] [<ffffffffbd216784>] ? SyS_ioctl+0x74/0x80
[ 49.150175] [<ffffffffbd60523b>] ? system_call_fast_compare_end+0xc/0x9b
[ 49.150177] ---[ end trace 9d52092261eae8d4 ]---
[ 86.996017] usb 2-5: new high-speed USB device number 2 using ehci-pci
[ 87.145765] usb 2-5: New USB device found, idVendor=18a5, idProduct=0302
[ 87.145767] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 87.145769] usb 2-5: Product: STORE N GO
[ 87.145771] usb 2-5: Manufacturer: Verbatim
[ 87.145772] usb 2-5: SerialNumber: 1210000000000740
[ 87.246544] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 87.246624] scsi host8: usb-storage 2-5:1.0
[ 87.246693] usbcore: registered new interface driver usb-storage
[ 87.264802] usbcore: registered new interface driver uas
[ 88.457401] scsi 8:0:0:0: Direct-Access Verbatim STORE N GO 1100 PQ: 0 ANSI: 4
[ 88.458045] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 88.459509] sd 8:0:0:0: [sdb] 63012864 512-byte logical blocks: (32.3 GB/30.0 GiB)
[ 88.460562] sd 8:0:0:0: [sdb] Write Protect is off
[ 88.460564] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 88.461757] sd 8:0:0:0: [sdb] No Caching mode page found
[ 88.461759] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 88.468139] sdb: sdb1
[ 88.471013] sd 8:0:0:0: [sdb] Attached SCSI removable disk
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-devel-unsubscribe@xxxxxxxxxxxxxxxxxxxxxxxxxx
For additional commands, e-mail: trinity-devel-help@xxxxxxxxxxxxxxxxxxxxxxxxxx
Read list messages on the web archive: http://trinity-devel.pearsoncomputing.net/
Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
