Re: [PATCH] scsi: target: iscsi: set memalloc_noio with loopback network connections

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2023-02-08 at 15:58 -0500, Laurence Oberman wrote:
> On Wed, 2023-02-08 at 15:09 -0500, David Jeffery wrote:
> > If an admin connects an iscsi initiator to an iscsi target on the
> > same
> > system, the iscsi connection is vulnerable to deadlocks during
> > memory
> > allocations. Memory allocations in the target task accepting the
> > I/O
> > from
> > the initiator can wait on the initiator's I/O when the system is
> > under
> > memory pressure, causing a deadlock situation between the iscsi
> > target and
> > initiator.
> > 
> > When in this configuration, the deadlock scenario can be avoided by
> > use of
> > GFP_NOIO allocations. Rather than force all configurations to use
> > NOIO,
> > memalloc_noio_save/restore can be used to force GFP_NOIO
> > allocations
> > only
> > when in this loopback configuration.
> > 
> > Signed-off-by: David Jeffery <djeffery@xxxxxxxxxx>
> > ---
> >  drivers/target/iscsi/iscsi_target.c | 21 +++++++++++++++++++++
> >  1 file changed, 21 insertions(+)
> > 
> > diff --git a/drivers/target/iscsi/iscsi_target.c
> > b/drivers/target/iscsi/iscsi_target.c
> > index baf4da7bb3b4..a68e47e2cdf9 100644
> > --- a/drivers/target/iscsi/iscsi_target.c
> > +++ b/drivers/target/iscsi/iscsi_target.c
> > @@ -16,6 +16,7 @@
> >  #include <linux/vmalloc.h>
> >  #include <linux/idr.h>
> >  #include <linux/delay.h>
> > +#include <linux/sched/mm.h>
> >  #include <linux/sched/signal.h>
> >  #include <asm/unaligned.h>
> >  #include <linux/inet.h>
> > @@ -4168,7 +4169,10 @@ int iscsi_target_rx_thread(void *arg)
> >  {
> >  	int rc;
> >  	struct iscsit_conn *conn = arg;
> > +	struct dst_entry *dst;
> >  	bool conn_freed = false;
> > +	bool loopback = false;
> > +	unsigned int flags;
> >  
> >  	/*
> >  	 * Allow ourselves to be interrupted by SIGINT so that a
> > @@ -4186,8 +4190,25 @@ int iscsi_target_rx_thread(void *arg)
> >  	if (!conn->conn_transport->iscsit_get_rx_pdu)
> >  		return 0;
> >  
> > +	/*
> > +	 * If the iscsi connection is over a loopback device from using
> > +	 * iscsi and iscsit on the same system, we need to set
> > memalloc_noio to
> > +	 * prevent memory allocation deadlocks between target and
> > initiator.
> > +	 */
> > +	rcu_read_lock();
> > +	dst = rcu_dereference(conn->sock->sk->sk_dst_cache);
> > +	if (dst && dst->dev && dst->dev->flags & IFF_LOOPBACK)
> > +		loopback = true;
> > +	rcu_read_unlock();
> > +
> > +	if (loopback)
> > +		flags = memalloc_noio_save();
> > +
> >  	conn->conn_transport->iscsit_get_rx_pdu(conn);
> >  
> > +	if (loopback)
> > +		memalloc_noio_restore(flags);
> > +
> >  	if (!signal_pending(current))
> >  		atomic_set(&conn->transport_failed, 1);
> >  	iscsit_take_action_for_connection_exit(conn, &conn_freed);
> 
> I had mentioned to Mike that this was already tested at a large
> customer and in our labs and resolved the deadlocks .
> 
> Regards
> Laurence Oberman
> 

Tested-by:   Laurence Oberman <loberman@xxxxxxxxxx>
Reviewed-by: Laurence Oberman <loberman@xxxxxxxxxx>

I hate  to nag here but we have a pressing customer issue and are keen
to get others to weigh in here.

Regards
Laurence



Thanks
Laurence




[Index of Archives]     [Linux SCSI]     [Kernel Newbies]     [Linux SCSI Target Infrastructure]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Device Mapper]

  Powered by Linux