[PATCH] scsi: efct: Remove useless DMA-32 fallback configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As stated in [1], dma_set_mask() with a 64-bit mask never fails if
dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

Simplify code and remove some dead code accordingly.

While at it, return the error code returned by dma_set_mask_and_coherent()
instead of -1.

[1]: https://lkml.org/lkml/2021/6/7/398

Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
This patch was not part of the 1st serie I've sent. So there is no
Reviewed-by tag.
---
 drivers/scsi/elx/efct/efct_driver.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/elx/efct/efct_driver.c b/drivers/scsi/elx/efct/efct_driver.c
index ae62fc3c9ee3..b08fc8839808 100644
--- a/drivers/scsi/elx/efct/efct_driver.c
+++ b/drivers/scsi/elx/efct/efct_driver.c
@@ -541,13 +541,10 @@ efct_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_drvdata(pdev, efct);
 
-	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) != 0) {
-		dev_warn(&pdev->dev, "trying DMA_BIT_MASK(32)\n");
-		if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)) != 0) {
-			dev_err(&pdev->dev, "setting DMA_BIT_MASK failed\n");
-			rc = -1;
-			goto dma_mask_out;
-		}
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (rc) {
+		dev_err(&pdev->dev, "setting DMA_BIT_MASK failed\n");
+		goto dma_mask_out;
 	}
 
 	num_interrupts = efct_device_interrupts_required(efct);
-- 
2.32.0




[Index of Archives]     [Linux SCSI]     [Kernel Newbies]     [Linux SCSI Target Infrastructure]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Device Mapper]

  Powered by Linux