From: Chaitanya Kulkarni <kch@xxxxxxxxxx> Hi, One of the responsibilities of the Operating System, along with managing resources, is to provide a unified interface to the user by creating hardware abstractions. In the Linux Kernel storage stack that abstraction is created by implementing the generic request operations such as REQ_OP_READ/REQ_OP_WRITE or REQ_OP_DISCARD/REQ_OP_WRITE_ZEROES, etc that are mapped to the specific low-level hardware protocol commands e.g. SCSI or NVMe. With that in mind, this RFC patch-series implements a new block layer operation to offload the data verification on to the controller if supported or emulate the operation if not. The main advantage is to free up the CPU and reduce the host link traffic since, for some devices, their internal bandwidth is higher than the host link and offloading this operation can improve the performance of the proactive error detection applications such as file system level scrubbing. * Background * ----------------------------------------------------------------------- NVMe Specification provides a controller level Verify command [1] which is similar to the ATA Verify [2] command where the controller is responsible for data verification without transferring the data to the host. (Offloading LBAs verification). This is designed to proactively discover any data corruption issues when the device is free so that applications can protect sensitive data and take corrective action instead of waiting for failure to occur. The NVMe Verify command is added in order to provide low level media scrubbing and possibly moving the data to the right place in case it has correctable media degradation. Also, this provides a way to enhance file-system level scrubbing/checksum verification and optinally offload this task, which is CPU intensive, to the kernel (when emulated), over the fabric, and to the controller (when supported). This is useful when the controller's internal bandwidth is higher than the host's bandwith showing a sharp increase in the performance due to _no host traffic or host CPU involvement_. * Implementation * ----------------------------------------------------------------------- Right now there is no generic interface which can be used by the in-kernel components such as file-system or userspace application (except passthru commands or some combination of write/read/compare) to issue verify command with the central block layer API. This can lead to each userspace applications having protocol specific IOCTL which defeates the purpose of having the OS provide a H/W abstraction. This patch series introduces a new block layer payloadless request operation REQ_OP_VERIFY that allows in-kernel components & userspace applications to verify the range of the LBAs by offloading checksum scrubbing/verification to the controller that is directly attached to the host. For direct attached devices this leads to decrease in the host DMA traffic and CPU usage and for the fabrics attached device over the network that leads to a decrease in the network traffic and CPU usage for both host & target. * Scope * ----------------------------------------------------------------------- Please note this only covers the operating system level overhead. Analyzing controller verify command performance for common protocols (SCSI/NVMe) is out of scope for REQ_OP_VERIFY. * Micro Benchmarks * ----------------------------------------------------------------------- When verifing 500GB of data on NVMeOF with nvme-loop and null_blk as a target backend block device results show almost a 80% performance increase :- With Verify resulting in REQ_OP_VERIFY to null_blk :- real 2m3.773s user 0m0.000s sys 0m59.553s With Emulation resulting in REQ_OP_READ null_blk :- real 12m18.964s user 0m0.002s sys 1m15.666s A detailed test log is included at the end of the cover letter. Each of the following was tested: 1. Direct Attached REQ_OP_VERIFY. 2. Fabrics Attached REQ_OP_VERIFY. 3. Multi-device (md) REQ_OP_VERIFY. * The complete picture * ----------------------------------------------------------------------- For the completeness the whole kernel stack support is divided into two phases :- Phase I :- Add and stabilize the support for the Block layer & low level drivers such as SCSI, NVMe, MD, and NVMeOF, implement necessary emulations in the block layer if needed and provide block level tools such as _blkverify_. Also, add appropriate testcases for code-coverage. Phase II :- Add and stabilize the support for upper layer kernel components such as file-systems and provide userspace tools such _fsverify_ to route the request from file systems to block layer to Low level device drivers. Please note that the interfaces for blk-lib.c REQ_OP_VERIFY emulation will change in future I put together for the scope of RFC. Any comments are welcome. -ck References:- [1] NVMe Verify :- For pro-actively avoiding unrecoverable read errors, NVMe 1.4 adds Verify and Get LBA Status commands. The Verify command is simple: it does everything a normal read command does, except for returning the data to the host system. If a read command would return an error, a verify command will return the same error. If a read command would be successful, a verify command will be as well. This makes it possible to do a low-level scrub of the stored data without being bottlenecked by the host interface bandwidth. Some SSDs will react to a fixable ECC error by moving or re-writing degraded data, and a verify command should trigger the same behavior. Overall, this should reduce the need for filesystem-level checksum scrubbing/verification. Each Verify command is tagged with a bit indicating whether the SSD should fail fast or try hard to recover data, similar to but overriding the above Read Recovery Level setting. [2] http://t13.org/Documents/UploadedDocuments/docs2017/di529r18-ATAATAPI_Command_Set_-_4.pdf Chaitanya Kulkarni (8): block: add support for REQ_OP_VERIFY scsi: add REQ_OP_VERIFY support nvme: add support for the Verify command nvmet: add Verify command support for bdev-ns nvmet: add Verify emulation support for bdev-ns nvmet: add verify emulation support for file-ns null_blk: add REQ_OP_VERIFY support md: add support for REQ_OP_VERIFY Documentation/ABI/testing/sysfs-block | 14 ++ block/blk-core.c | 5 + block/blk-lib.c | 192 ++++++++++++++++++++++++++ block/blk-merge.c | 19 +++ block/blk-settings.c | 17 +++ block/blk-sysfs.c | 8 ++ block/blk-zoned.c | 1 + block/bounce.c | 1 + block/ioctl.c | 35 +++++ drivers/block/null_blk/main.c | 25 +++- drivers/block/null_blk/null_blk.h | 1 + drivers/md/dm-core.h | 1 + drivers/md/dm-io.c | 8 +- drivers/md/dm-linear.c | 11 +- drivers/md/dm-mpath.c | 1 + drivers/md/dm-rq.c | 3 + drivers/md/dm-stripe.c | 1 + drivers/md/dm-table.c | 36 +++++ drivers/md/dm.c | 31 +++++ drivers/md/md-linear.c | 10 ++ drivers/md/md-multipath.c | 1 + drivers/md/md.h | 7 + drivers/md/raid10.c | 1 + drivers/md/raid5.c | 1 + drivers/nvme/host/core.c | 39 ++++++ drivers/nvme/target/admin-cmd.c | 3 +- drivers/nvme/target/core.c | 12 +- drivers/nvme/target/io-cmd-bdev.c | 74 ++++++++++ drivers/nvme/target/io-cmd-file.c | 151 ++++++++++++++++++++ drivers/nvme/target/nvmet.h | 3 + drivers/scsi/sd.c | 52 +++++++ drivers/scsi/sd.h | 1 + include/linux/bio.h | 10 +- include/linux/blk_types.h | 2 + include/linux/blkdev.h | 31 +++++ include/linux/device-mapper.h | 6 + include/linux/nvme.h | 19 +++ include/uapi/linux/fs.h | 1 + 38 files changed, 824 insertions(+), 10 deletions(-) ---------------------------------------------------------------------------- 1. NVMeOF Block device backend with null_blk verify=1 support :- ---------------------------------------------------------------------------- # ./bdev.sh 1 ++ FILE=/dev/nullb0 ++ modprobe -r null_blk ++ modprobe null_blk verify=1 gb=50 ++ modprobe nvme ++ modprobe nvme-fabrics ++ modprobe nvmet ++ dmesg -c > /dev/null ++ sleep 3 ++ tree /sys/kernel/config /sys/kernel/config ├── nullb │ └── features └── nvmet ├── hosts ├── ports └── subsystems 5 directories, 1 file ++ mkdir /sys/kernel/config/nvmet/subsystems/fs ++ for i in 1 ++ mkdir /sys/kernel/config/nvmet/subsystems/fs/namespaces/1 ++ echo -n /dev/nullb0 ++ cat /sys/kernel/config/nvmet/subsystems/fs/namespaces/1/device_path /dev/nullb0 ++ echo 1 ++ mkdir /sys/kernel/config/nvmet/ports/1/ ++ echo -n loop ++ echo -n 1 ++ ln -s /sys/kernel/config/nvmet/subsystems/fs /sys/kernel/config/nvmet/ports/1/subsystems/ ++ sleep 1 ++ echo transport=loop,nqn=fs ++ sleep 1 ++ mount ++ column -t ++ grep nvme ++ dmesg -c [12826.608855] nvmet: adding nsid 1 to subsystem fs [12827.680593] nvmet: creating controller 1 for subsystem fs for NQN nqn.2014-08.org.nvmexpress:uuid:ec41afad-329f-4453-b10c-628ad87d6558. [12827.682760] nvme nvme1: creating 12 I/O queues. [12827.693358] nvme nvme1: new ctrl: "fs" [12827.695610] nvme1n1: detected capacity change from 0 to 53687091200 # insmod host/test_verify.ko # dmesg -c [13104.730748] TEST: REQ_OP_VERIFY sect 0 nr_sect 2048 [13104.730805] nvme: REQ_OP_VERIFY sect 0 nr_sect 2041 insmod [13104.731268] nvmet: REQ_OP_VERIFY sect 0 nr_sect 2041 kworker/2:2 [13104.731384] null_blk: REQ_OP_VERIFY sect 0 nr_sect 2041 kworker/2:1H [13104.731432] nvme: REQ_OP_VERIFY sect 2041 nr_sect 7 kworker/2:1H [13104.731443] nvmet: REQ_OP_VERIFY sect 2041 nr_sect 7 kworker/2:2 [13104.731458] null_blk: REQ_OP_VERIFY sect 2041 nr_sect 7 kworker/2:1H [13104.731524] ---------------------------------------------------------- [13104.731526] TEST: REQ_OP_VERIFY sect 2048 nr_sect 2048 [13104.731542] nvme: REQ_OP_VERIFY sect 2048 nr_sect 2041 insmod [13104.731555] nvme: REQ_OP_VERIFY sect 4089 nr_sect 7 kworker/2:1H [13104.731564] nvmet: REQ_OP_VERIFY sect 2048 nr_sect 2041 kworker/2:2 [13104.731577] nvmet: REQ_OP_VERIFY sect 4089 nr_sect 7 kworker/2:2 [13104.731620] null_blk: REQ_OP_VERIFY sect 2048 nr_sect 2041 kworker/2:1H [13104.731625] null_blk: REQ_OP_VERIFY sect 4089 nr_sect 7 kworker/2:1H [13104.731675] ---------------------------------------------------------- [13104.731678] TEST: REQ_OP_VERIFY sect 4096 nr_sect 2048 [13104.731694] nvme: REQ_OP_VERIFY sect 4096 nr_sect 2041 insmod [13104.731709] nvme: REQ_OP_VERIFY sect 6137 nr_sect 7 kworker/2:1H [13104.731716] nvmet: REQ_OP_VERIFY sect 4096 nr_sect 2041 kworker/2:2 [13104.731750] nvmet: REQ_OP_VERIFY sect 6137 nr_sect 7 kworker/2:2 [13104.731766] null_blk: REQ_OP_VERIFY sect 4096 nr_sect 2041 kworker/2:1H [13104.731771] null_blk: REQ_OP_VERIFY sect 6137 nr_sect 7 kworker/2:1H [13104.731816] ---------------------------------------------------------- [13104.731819] TEST: REQ_OP_VERIFY sect 6144 nr_sect 2048 [13104.731833] nvme: REQ_OP_VERIFY sect 6144 nr_sect 2041 insmod [13104.731847] nvme: REQ_OP_VERIFY sect 8185 nr_sect 7 kworker/2:1H [13104.731856] nvmet: REQ_OP_VERIFY sect 6144 nr_sect 2041 kworker/2:2 [13104.731867] nvmet: REQ_OP_VERIFY sect 8185 nr_sect 7 kworker/2:2 [13104.731881] null_blk: REQ_OP_VERIFY sect 6144 nr_sect 2041 kworker/2:1H [13104.731886] null_blk: REQ_OP_VERIFY sect 8185 nr_sect 7 kworker/2:1H [13104.731934] ---------------------------------------------------------- [13104.731936] TEST: REQ_OP_VERIFY sect 8192 nr_sect 2048 [13104.731951] nvme: REQ_OP_VERIFY sect 8192 nr_sect 2041 insmod [13104.731965] nvme: REQ_OP_VERIFY sect 10233 nr_sect 7 kworker/2:1H [13104.731972] nvmet: REQ_OP_VERIFY sect 8192 nr_sect 2041 kworker/2:2 [13104.731984] nvmet: REQ_OP_VERIFY sect 10233 nr_sect 7 kworker/2:2 [13104.732019] null_blk: REQ_OP_VERIFY sect 8192 nr_sect 2041 kworker/2:1H [13104.732024] null_blk: REQ_OP_VERIFY sect 10233 nr_sect 7 kworker/2:1H [13104.732069] ---------------------------------------------------------- ---------------------------------------------------------------------------- 2. NVMeOF Block device backend with null_blk verify=0 support :- ---------------------------------------------------------------------------- # ./bdev.sh 0 ++ FILE=/dev/nullb0 ++ modprobe -r null_blk ++ modprobe null_blk verify=0 gb=50 ++ modprobe nvme ++ modprobe nvme-fabrics ++ modprobe nvmet ++ dmesg -c > /dev/null ++ sleep 3 ++ tree /sys/kernel/config /sys/kernel/config ├── nullb │ └── features └── nvmet ├── hosts ├── ports └── subsystems 5 directories, 1 file ++ mkdir /sys/kernel/config/nvmet/subsystems/fs ++ for i in 1 ++ mkdir /sys/kernel/config/nvmet/subsystems/fs/namespaces/1 ++ echo -n /dev/nullb0 ++ cat /sys/kernel/config/nvmet/subsystems/fs/namespaces/1/device_path /dev/nullb0 ++ echo 1 ++ mkdir /sys/kernel/config/nvmet/ports/1/ ++ echo -n loop ++ echo -n 1 ++ ln -s /sys/kernel/config/nvmet/subsystems/fs /sys/kernel/config/nvmet/ports/1/subsystems/ ++ sleep 1 ++ echo transport=loop,nqn=fs ++ sleep 1 ++ mount ++ column -t ++ grep nvme ++ dmesg -c [12826.608855] nvmet: adding nsid 1 to subsystem fs [12827.680593] nvmet: creating controller 1 for subsystem fs for NQN nqn.2014-08.org.nvmexpress:uuid:ec41afad-329f-4453-b10c-628ad87d6558. [12827.682760] nvme nvme1: creating 12 I/O queues. [12827.693358] nvme nvme1: new ctrl: "fs" [12827.695610] nvme1n1: detected capacity change from 0 to 53687091200 # insmod host/test_verify.ko # dmesg -c [13981.069911] TEST: REQ_OP_VERIFY sect 0 nr_sect 2048 [13981.069971] nvme: REQ_OP_VERIFY sect 0 nr_sect 2041 insmod [13981.070240] nvme: REQ_OP_VERIFY sect 2041 nr_sect 7 kworker/9:1H [13981.070350] nvmet: REQ_OP_VERIFY sect 0 nr_sect 2041 kworker/9:2 [13981.070894] null_blk: REQ_OP_READ sect 0 nr_sect 255 kworker/9:1H [13981.070943] null_blk: REQ_OP_READ sect 255 nr_sect 255 kworker/9:1H [13981.070978] null_blk: REQ_OP_READ sect 510 nr_sect 255 kworker/9:1H [13981.071050] null_blk: REQ_OP_READ sect 765 nr_sect 255 kworker/9:1H [13981.071087] null_blk: REQ_OP_READ sect 1020 nr_sect 255 kworker/9:1H [13981.071120] null_blk: REQ_OP_READ sect 1275 nr_sect 255 kworker/9:1H [13981.071155] null_blk: REQ_OP_READ sect 1530 nr_sect 255 kworker/9:1H [13981.071244] null_blk: REQ_OP_READ sect 1785 nr_sect 255 kworker/9:1H [13981.071252] null_blk: REQ_OP_READ sect 2040 nr_sect 1 kworker/9:1H [13981.071907] nvmet: REQ_OP_VERIFY sect 2041 nr_sect 7 kworker/9:2 [13981.071937] null_blk: REQ_OP_READ sect 2041 nr_sect 7 kworker/9:1H [13981.072264] ---------------------------------------------------------- [13981.072271] TEST: REQ_OP_VERIFY sect 2048 nr_sect 2048 [13981.072327] nvme: REQ_OP_VERIFY sect 2048 nr_sect 2041 insmod [13981.072381] nvme: REQ_OP_VERIFY sect 4089 nr_sect 7 kworker/2:1H [13981.072547] nvmet: REQ_OP_VERIFY sect 2048 nr_sect 2041 kworker/2:1 [13981.072632] null_blk: REQ_OP_READ sect 2048 nr_sect 255 kworker/2:1H [13981.072754] null_blk: REQ_OP_READ sect 2303 nr_sect 255 kworker/2:1H [13981.072858] null_blk: REQ_OP_READ sect 2558 nr_sect 255 kworker/2:1H [13981.072915] null_blk: REQ_OP_READ sect 2813 nr_sect 255 kworker/2:1H [13981.072961] null_blk: REQ_OP_READ sect 3068 nr_sect 255 kworker/2:1H [13981.073052] null_blk: REQ_OP_READ sect 3323 nr_sect 255 kworker/2:1H [13981.073102] null_blk: REQ_OP_READ sect 3578 nr_sect 255 kworker/2:1H [13981.073155] null_blk: REQ_OP_READ sect 3833 nr_sect 255 kworker/2:1H [13981.073164] null_blk: REQ_OP_READ sect 4088 nr_sect 1 kworker/2:1H [13981.073861] nvmet: REQ_OP_VERIFY sect 4089 nr_sect 7 kworker/2:1 [13981.073924] null_blk: REQ_OP_READ sect 4089 nr_sect 7 kworker/2:1H [13981.074754] ---------------------------------------------------------- [13981.074766] TEST: REQ_OP_VERIFY sect 4096 nr_sect 2048 [13981.074812] nvme: REQ_OP_VERIFY sect 4096 nr_sect 2041 insmod [13981.074859] nvme: REQ_OP_VERIFY sect 6137 nr_sect 7 kworker/0:1H [13981.075035] nvmet: REQ_OP_VERIFY sect 4096 nr_sect 2041 kworker/0:2 [13981.075103] null_blk: REQ_OP_READ sect 4096 nr_sect 255 kworker/0:1H [13981.075141] null_blk: REQ_OP_READ sect 4351 nr_sect 255 kworker/0:1H [13981.075171] null_blk: REQ_OP_READ sect 4606 nr_sect 255 kworker/0:1H [13981.075201] null_blk: REQ_OP_READ sect 4861 nr_sect 255 kworker/0:1H [13981.075230] null_blk: REQ_OP_READ sect 5116 nr_sect 255 kworker/0:1H [13981.075259] null_blk: REQ_OP_READ sect 5371 nr_sect 255 kworker/0:1H [13981.075288] null_blk: REQ_OP_READ sect 5626 nr_sect 255 kworker/0:1H [13981.075324] null_blk: REQ_OP_READ sect 5881 nr_sect 255 kworker/0:1H [13981.075329] null_blk: REQ_OP_READ sect 6136 nr_sect 1 kworker/0:1H [13981.076247] nvmet: REQ_OP_VERIFY sect 6137 nr_sect 7 kworker/0:2 [13981.076294] null_blk: REQ_OP_READ sect 6137 nr_sect 7 kworker/0:1H [13981.076640] ---------------------------------------------------------- [13981.076645] TEST: REQ_OP_VERIFY sect 6144 nr_sect 2048 [13981.076677] nvme: REQ_OP_VERIFY sect 6144 nr_sect 2041 insmod [13981.076714] nvme: REQ_OP_VERIFY sect 8185 nr_sect 7 kworker/0:1H [13981.076823] nvmet: REQ_OP_VERIFY sect 6144 nr_sect 2041 kworker/0:2 [13981.076883] null_blk: REQ_OP_READ sect 6144 nr_sect 255 kworker/0:1H [13981.076917] null_blk: REQ_OP_READ sect 6399 nr_sect 255 kworker/0:1H [13981.076944] null_blk: REQ_OP_READ sect 6654 nr_sect 255 kworker/0:1H [13981.076969] null_blk: REQ_OP_READ sect 6909 nr_sect 255 kworker/0:1H [13981.077025] null_blk: REQ_OP_READ sect 7164 nr_sect 255 kworker/0:1H [13981.077053] null_blk: REQ_OP_READ sect 7419 nr_sect 255 kworker/0:1H [13981.077085] null_blk: REQ_OP_READ sect 7674 nr_sect 255 kworker/0:1H [13981.077122] null_blk: REQ_OP_READ sect 7929 nr_sect 255 kworker/0:1H [13981.077127] null_blk: REQ_OP_READ sect 8184 nr_sect 1 kworker/0:1H [13981.077233] nvmet: REQ_OP_VERIFY sect 8185 nr_sect 7 kworker/0:1 [13981.077293] null_blk: REQ_OP_READ sect 8185 nr_sect 7 kworker/0:1H [13981.078282] ---------------------------------------------------------- [13981.078286] TEST: REQ_OP_VERIFY sect 8192 nr_sect 2048 [13981.078318] nvme: REQ_OP_VERIFY sect 8192 nr_sect 2041 insmod [13981.078376] nvme: REQ_OP_VERIFY sect 10233 nr_sect 7 kworker/0:1H [13981.078477] nvmet: REQ_OP_VERIFY sect 8192 nr_sect 2041 kworker/0:2 [13981.078532] null_blk: REQ_OP_READ sect 8192 nr_sect 255 kworker/0:1H [13981.078564] null_blk: REQ_OP_READ sect 8447 nr_sect 255 kworker/0:1H [13981.078596] null_blk: REQ_OP_READ sect 8702 nr_sect 255 kworker/0:1H [13981.078622] null_blk: REQ_OP_READ sect 8957 nr_sect 255 kworker/0:1H [13981.078655] null_blk: REQ_OP_READ sect 9212 nr_sect 255 kworker/0:1H [13981.078682] null_blk: REQ_OP_READ sect 9467 nr_sect 255 kworker/0:1H [13981.078709] null_blk: REQ_OP_READ sect 9722 nr_sect 255 kworker/0:1H [13981.078741] null_blk: REQ_OP_READ sect 9977 nr_sect 255 kworker/0:1H [13981.078746] null_blk: REQ_OP_READ sect 10232 nr_sect 1 kworker/0:1H [13981.078903] nvmet: REQ_OP_VERIFY sect 10233 nr_sect 7 kworker/0:1 [13981.078940] null_blk: REQ_OP_READ sect 10233 nr_sect 7 kworker/0:1H [13981.079561] ---------------------------------------------------------- ---------------------------------------------------------------------------- 3. NVMeOF with File Backend with Buffered IO :- ---------------------------------------------------------------------------- # ./file.sh ++ FILE=/mnt/backend/nvme1n1 ++ SS=fs ++ SSPATH=/sys/kernel/config/nvmet/subsystems/fs/ ++ PORTS=/sys/kernel/config/nvmet/ports ++ main ++ load_modules ++ modprobe nvme ++ modprobe nvme-fabrics ++ modprobe nvmet ++ modprobe nvme-loop ++ sleep 3 ++ mount_fs ++ make_nullb ++ local src=drivers/block/ +++ uname -r ++ local dest=/lib/modules/5.6.0-rc7lblk+/kernel/drivers/block ++ modprobe -r null_blk ++ makej M=drivers/block/ MODPOST 11 modules ++ cp drivers/block//null_blk.ko /lib/modules/5.6.0-rc7lblk+/kernel/drivers/block/ ++ modprobe null_blk nr_devices=0 ++ sleep 1 ++ mkdir config/nullb/nullb0 ++ tree config/nullb/nullb0 config/nullb/nullb0 ├── badblocks ├── blocking ├── blocksize ├── cache_size ├── completion_nsec ├── discard ├── home_node ├── hw_queue_depth ├── index ├── irqmode ├── mbps ├── memory_backed ├── power ├── queue_mode ├── size ├── submit_queues ├── use_per_node_hctx ├── verify ├── zoned ├── zone_nr_conv └── zone_size 0 directories, 21 files ++ echo 1 ++ echo 512 ++ echo 20480 ++ echo 1 ++ sleep 2 +++ cat config/nullb/nullb0/index ++ IDX=0 ++ lsblk ++ grep null0 ++ sleep 1 ++ mkfs.xfs -f /dev/nullb0 meta-data=/dev/nullb0 isize=512 agcount=4, agsize=1310720 blks = sectsz=512 attr=2, projid32bit=1 = crc=1 finobt=0, sparse=0 data = bsize=4096 blocks=5242880, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=1 log =internal log bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 ++ mount /dev/nullb0 /mnt/backend/ ++ sleep 1 ++ mount ++ column -t ++ grep nvme ++ dd if=/dev/zero of=/mnt/backend/nvme1n1 count=2621440 bs=4096 2621440+0 records in 2621440+0 records out 10737418240 bytes (11 GB) copied, 33.6448 s, 319 MB/s ++ file /mnt/backend/nvme1n1 /mnt/backend/nvme1n1: data ++ make_target ++ tree /sys/kernel/config /sys/kernel/config ├── nullb │ ├── features │ └── nullb0 │ ├── badblocks │ ├── blocking │ ├── blocksize │ ├── cache_size │ ├── completion_nsec │ ├── discard │ ├── home_node │ ├── hw_queue_depth │ ├── index │ ├── irqmode │ ├── mbps │ ├── memory_backed │ ├── power │ ├── queue_mode │ ├── size │ ├── submit_queues │ ├── use_per_node_hctx │ ├── verify │ ├── zoned │ ├── zone_nr_conv │ └── zone_size └── nvmet ├── hosts ├── ports └── subsystems 6 directories, 22 files ++ mkdir /sys/kernel/config/nvmet/subsystems/fs/ ++ for i in 1 ++ mkdir /sys/kernel/config/nvmet/subsystems/fs//namespaces/1 ++ echo -n /mnt/backend/nvme1n1 ++ echo 1 ++ cat /sys/kernel/config/nvmet/subsystems/fs//namespaces/1/device_path /mnt/backend/nvme1n1 ++ cat /sys/kernel/config/nvmet/subsystems/fs//namespaces/1/buffered_io 1 ++ echo 1 ++ mkdir /sys/kernel/config/nvmet/ports/1/ ++ echo -n loop ++ echo -n 1 ++ ln -s /sys/kernel/config/nvmet/subsystems/fs/ /sys/kernel/config/nvmet/ports/1/subsystems/ ++ sleep 1 ++ connect ++ echo transport=loop,nqn=fs ++ sleep 1 # # insmod host/test_verify.ko # dmesg -c [13469.310678] TEST: REQ_OP_VERIFY sect 0 nr_sect 2048 [13469.310777] nvme: REQ_OP_VERIFY sect 0 nr_sect 2048 kworker/5:1H [13469.310978] nvmet: REQ_OP_VERIFY sect 0 nr_sect 2048 kworker/5:0 [13469.313189] ---------------------------------------------------------- [13469.313193] TEST: REQ_OP_VERIFY sect 2048 nr_sect 2048 [13469.313230] nvme: REQ_OP_VERIFY sect 2048 nr_sect 2048 kworker/5:1H [13469.313272] nvmet: REQ_OP_VERIFY sect 2048 nr_sect 2048 kworker/5:0 [13469.313916] ---------------------------------------------------------- [13469.313920] TEST: REQ_OP_VERIFY sect 4096 nr_sect 2048 [13469.313950] nvme: REQ_OP_VERIFY sect 4096 nr_sect 2048 kworker/5:1H [13469.313986] nvmet: REQ_OP_VERIFY sect 4096 nr_sect 2048 kworker/5:0 [13469.314708] ---------------------------------------------------------- [13469.314713] TEST: REQ_OP_VERIFY sect 6144 nr_sect 2048 [13469.314746] nvme: REQ_OP_VERIFY sect 6144 nr_sect 2048 kworker/5:1H [13469.314784] nvmet: REQ_OP_VERIFY sect 6144 nr_sect 2048 kworker/5:0 [13469.315425] ---------------------------------------------------------- [13469.315429] TEST: REQ_OP_VERIFY sect 8192 nr_sect 2048 [13469.315457] nvme: REQ_OP_VERIFY sect 8192 nr_sect 2048 kworker/5:1H [13469.315490] nvmet: REQ_OP_VERIFY sect 8192 nr_sect 2048 kworker/5:0 [13469.316005] ---------------------------------------------------------- XFS Trace for buffered_io() :- kworker/5:0-19863 [005] ...1 13469.350152: xfs_file_buffered_read: dev 252:0 ino 0x43 size 0x280000000 offset 0x0 count 0x100000 kworker/5:0-19863 [005] ...1 13469.351960: xfs_file_buffered_read: dev 252:0 ino 0x43 size 0x280000000 offset 0x100000 count 0x100000 kworker/5:0-19863 [005] ...1 13469.352705: xfs_file_buffered_read: dev 252:0 ino 0x43 size 0x280000000 offset 0x200000 count 0x100000 kworker/5:0-19863 [005] ...1 13469.353472: xfs_file_buffered_read: dev 252:0 ino 0x43 size 0x280000000 offset 0x300000 count 0x100000 kworker/5:0-19863 [005] ...1 13469.354177: xfs_file_buffered_read: dev 252:0 ino 0x43 size 0x280000000 offset 0x400000 count 0x100000 ---------------------------------------------------------------------------- 4. NVMeOF with File Backend with DIRECT IO :- ---------------------------------------------------------------------------- # ./file.sh ++ FILE=/mnt/backend/nvme1n1 ++ SS=fs ++ SSPATH=/sys/kernel/config/nvmet/subsystems/fs/ ++ PORTS=/sys/kernel/config/nvmet/ports ++ main ++ load_modules ++ modprobe nvme ++ modprobe nvme-fabrics ++ modprobe nvmet ++ modprobe nvme-loop ++ sleep 3 ++ mount_fs ++ make_nullb ++ local src=drivers/block/ +++ uname -r ++ local dest=/lib/modules/5.6.0-rc7lblk+/kernel/drivers/block ++ modprobe -r null_blk ++ makej M=drivers/block/ MODPOST 11 modules ++ cp drivers/block//null_blk.ko /lib/modules/5.6.0-rc7lblk+/kernel/drivers/block/ ++ modprobe null_blk nr_devices=0 ++ sleep 1 ++ mkdir config/nullb/nullb0 ++ tree config/nullb/nullb0 config/nullb/nullb0 ├── badblocks ├── blocking ├── blocksize ├── cache_size ├── completion_nsec ├── discard ├── home_node ├── hw_queue_depth ├── index ├── irqmode ├── mbps ├── memory_backed ├── power ├── queue_mode ├── size ├── submit_queues ├── use_per_node_hctx ├── verify ├── zoned ├── zone_nr_conv └── zone_size 0 directories, 21 files ++ echo 1 ++ echo 512 ++ echo 20480 ++ echo 1 ++ sleep 2 +++ cat config/nullb/nullb0/index ++ IDX=0 ++ lsblk ++ grep null0 ++ sleep 1 ++ mkfs.xfs -f /dev/nullb0 meta-data=/dev/nullb0 isize=512 agcount=4, agsize=1310720 blks = sectsz=512 attr=2, projid32bit=1 = crc=1 finobt=0, sparse=0 data = bsize=4096 blocks=5242880, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=1 log =internal log bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 ++ mount /dev/nullb0 /mnt/backend/ ++ sleep 1 ++ mount ++ column -t ++ grep nvme ++ dd if=/dev/zero of=/mnt/backend/nvme1n1 count=2621440 bs=4096 2621440+0 records in 2621440+0 records out 10737418240 bytes (11 GB) copied, 33.7626 s, 318 MB/s ++ file /mnt/backend/nvme1n1 /mnt/backend/nvme1n1: data ++ make_target ++ tree /sys/kernel/config /sys/kernel/config ├── nullb │ ├── features │ └── nullb0 │ ├── badblocks │ ├── blocking │ ├── blocksize │ ├── cache_size │ ├── completion_nsec │ ├── discard │ ├── home_node │ ├── hw_queue_depth │ ├── index │ ├── irqmode │ ├── mbps │ ├── memory_backed │ ├── power │ ├── queue_mode │ ├── size │ ├── submit_queues │ ├── use_per_node_hctx │ ├── verify │ ├── zoned │ ├── zone_nr_conv │ └── zone_size └── nvmet ├── hosts ├── ports └── subsystems 6 directories, 22 files ++ mkdir /sys/kernel/config/nvmet/subsystems/fs/ ++ for i in 1 ++ mkdir /sys/kernel/config/nvmet/subsystems/fs//namespaces/1 ++ echo -n /mnt/backend/nvme1n1 ++ echo 0 ++ cat /sys/kernel/config/nvmet/subsystems/fs//namespaces/1/device_path /mnt/backend/nvme1n1 ++ cat /sys/kernel/config/nvmet/subsystems/fs//namespaces/1/buffered_io 0 ++ echo 1 ++ mkdir /sys/kernel/config/nvmet/ports/1/ ++ echo -n loop ++ echo -n 1 ++ ln -s /sys/kernel/config/nvmet/subsystems/fs/ /sys/kernel/config/nvmet/ports/1/subsystems/ ++ sleep 1 ++ connect ++ echo transport=loop,nqn=fs ++ sleep 1 # # insmod host/test_verify.ko # dmesg -c # Since XFS doesn't have the verify interface it will go as read operation # to the null_blk device on which we have formatted xfs. [13254.855110] TEST: REQ_OP_VERIFY sect 0 nr_sect 2048 [13254.855183] nvme: REQ_OP_VERIFY sect 0 nr_sect 2048 kworker/4:1H [13254.855318] nvmet: REQ_OP_VERIFY sect 0 nr_sect 2048 kworker/4:1 [13254.857858] null_blk: REQ_OP_READ sect 128 nr_sect 255 kworker/4:1H [13254.857901] null_blk: REQ_OP_READ sect 383 nr_sect 255 kworker/4:1H [13254.857965] null_blk: REQ_OP_READ sect 638 nr_sect 255 kworker/4:1H [13254.858031] null_blk: REQ_OP_READ sect 893 nr_sect 255 kworker/4:1H [13254.858069] null_blk: REQ_OP_READ sect 1148 nr_sect 255 kworker/4:1H [13254.858105] null_blk: REQ_OP_READ sect 1403 nr_sect 255 kworker/4:1H [13254.858132] null_blk: REQ_OP_READ sect 1658 nr_sect 255 kworker/4:1H [13254.858156] null_blk: REQ_OP_READ sect 1913 nr_sect 255 kworker/4:1H [13254.858194] null_blk: REQ_OP_READ sect 2168 nr_sect 8 kworker/4:1H [13254.859882] ---------------------------------------------------------- [13254.859885] TEST: REQ_OP_VERIFY sect 2048 nr_sect 2048 [13254.859912] nvme: REQ_OP_VERIFY sect 2048 nr_sect 2048 kworker/4:1H [13254.859929] nvmet: REQ_OP_VERIFY sect 2048 nr_sect 2048 kworker/4:1 [13254.862603] null_blk: REQ_OP_READ sect 2176 nr_sect 255 kworker/4:1H [13254.862647] null_blk: REQ_OP_READ sect 2431 nr_sect 255 kworker/4:1H [13254.862674] null_blk: REQ_OP_READ sect 2686 nr_sect 255 kworker/4:1H [13254.862699] null_blk: REQ_OP_READ sect 2941 nr_sect 255 kworker/4:1H [13254.862728] null_blk: REQ_OP_READ sect 3196 nr_sect 255 kworker/4:1H [13254.862754] null_blk: REQ_OP_READ sect 3451 nr_sect 255 kworker/4:1H [13254.862780] null_blk: REQ_OP_READ sect 3706 nr_sect 255 kworker/4:1H [13254.862813] null_blk: REQ_OP_READ sect 3961 nr_sect 255 kworker/4:1H [13254.862839] null_blk: REQ_OP_READ sect 4216 nr_sect 8 kworker/4:1H [13254.864087] ---------------------------------------------------------- [13254.864090] TEST: REQ_OP_VERIFY sect 4096 nr_sect 2048 [13254.864115] nvme: REQ_OP_VERIFY sect 4096 nr_sect 2048 kworker/4:1H [13254.864131] nvmet: REQ_OP_VERIFY sect 4096 nr_sect 2048 kworker/4:1 [13254.866647] null_blk: REQ_OP_READ sect 4224 nr_sect 255 kworker/4:1H [13254.866678] null_blk: REQ_OP_READ sect 4479 nr_sect 255 kworker/4:1H [13254.866703] null_blk: REQ_OP_READ sect 4734 nr_sect 255 kworker/4:1H [13254.866728] null_blk: REQ_OP_READ sect 4989 nr_sect 255 kworker/4:1H [13254.866754] null_blk: REQ_OP_READ sect 5244 nr_sect 255 kworker/4:1H [13254.866780] null_blk: REQ_OP_READ sect 5499 nr_sect 255 kworker/4:1H [13254.866806] null_blk: REQ_OP_READ sect 5754 nr_sect 255 kworker/4:1H [13254.866833] null_blk: REQ_OP_READ sect 6009 nr_sect 255 kworker/4:1H [13254.866861] null_blk: REQ_OP_READ sect 6264 nr_sect 8 kworker/4:1H [13254.868067] ---------------------------------------------------------- [13254.868071] TEST: REQ_OP_VERIFY sect 6144 nr_sect 2048 [13254.868095] nvme: REQ_OP_VERIFY sect 6144 nr_sect 2048 kworker/4:1H [13254.868110] nvmet: REQ_OP_VERIFY sect 6144 nr_sect 2048 kworker/4:1 [13254.870599] null_blk: REQ_OP_READ sect 6272 nr_sect 255 kworker/4:1H [13254.870631] null_blk: REQ_OP_READ sect 6527 nr_sect 255 kworker/4:1H [13254.870657] null_blk: REQ_OP_READ sect 6782 nr_sect 255 kworker/4:1H [13254.870681] null_blk: REQ_OP_READ sect 7037 nr_sect 255 kworker/4:1H [13254.870706] null_blk: REQ_OP_READ sect 7292 nr_sect 255 kworker/4:1H [13254.870732] null_blk: REQ_OP_READ sect 7547 nr_sect 255 kworker/4:1H [13254.870758] null_blk: REQ_OP_READ sect 7802 nr_sect 255 kworker/4:1H [13254.870782] null_blk: REQ_OP_READ sect 8057 nr_sect 255 kworker/4:1H [13254.870837] null_blk: REQ_OP_READ sect 8312 nr_sect 8 kworker/4:1H [13254.871956] ---------------------------------------------------------- [13254.871959] TEST: REQ_OP_VERIFY sect 8192 nr_sect 2048 [13254.871982] nvme: REQ_OP_VERIFY sect 8192 nr_sect 2048 kworker/4:1H [13254.872045] nvmet: REQ_OP_VERIFY sect 8192 nr_sect 2048 kworker/4:1 [13254.874532] null_blk: REQ_OP_READ sect 8320 nr_sect 255 kworker/4:1H [13254.874562] null_blk: REQ_OP_READ sect 8575 nr_sect 255 kworker/4:1H [13254.874588] null_blk: REQ_OP_READ sect 8830 nr_sect 255 kworker/4:1H [13254.874613] null_blk: REQ_OP_READ sect 9085 nr_sect 255 kworker/4:1H [13254.874638] null_blk: REQ_OP_READ sect 9340 nr_sect 255 kworker/4:1H [13254.874664] null_blk: REQ_OP_READ sect 9595 nr_sect 255 kworker/4:1H [13254.874689] null_blk: REQ_OP_READ sect 9850 nr_sect 255 kworker/4:1H [13254.874715] null_blk: REQ_OP_READ sect 10105 nr_sect 255 kworker/4:1H [13254.874741] null_blk: REQ_OP_READ sect 10360 nr_sect 8 kworker/4:1H [13254.875852] ---------------------------------------------------------- ---------------------------------------------------------------------------- 5. DM Linear testing:- ---------------------------------------------------------------------------- # ./nullbtests-md.sh + lvremove /dev/nullbvg/nullblv Volume group "nullbvg" not found Cannot process volume group nullbvg + vgremove nullbvg Volume group "nullbvg" not found Cannot process volume group nullbvg + pvremove /dev/nullb0p1 /dev/nullb1p1 Device /dev/nullb0p1 not found. Device /dev/nullb1p1 not found. + rmdir config/nullb/nullb0 rmdir: failed to remove ‘config/nullb/nullb0’: No such file or directory + rmdir config/nullb/nullb1 rmdir: failed to remove ‘config/nullb/nullb1’: No such file or directory + modprobe -r null_blk + modprobe null_blk nr_devices=0 verify=1 + declare -a arr + for i in 0 1 + NULLB_DIR=config/nullb/nullb0 + mkdir config/nullb/nullb0 + tree config/nullb/nullb0 config/nullb/nullb0 ├── badblocks ├── blocking ├── blocksize ├── cache_size ├── completion_nsec ├── discard ├── home_node ├── hw_queue_depth ├── index ├── irqmode ├── max_sectors ├── mbps ├── memory_backed ├── power ├── queue_mode ├── size ├── submit_queues ├── use_per_node_hctx ├── verify ├── zone_capacity ├── zoned ├── zone_max_active ├── zone_max_open ├── zone_nr_conv └── zone_size 0 directories, 25 files + sleep 1 + echo 1 + echo 512 + echo 10 + echo 1 + echo 1 ++ cat config/nullb/nullb0/index + IDX=0 + sleep 1 + sed -e 's/\s*\([\+0-9a-zA-Z]*\).*/\1/' + fdisk /dev/nullb0 Welcome to fdisk (util-linux 2.23.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Device does not contain a recognized partition table Building a new DOS disklabel with disk identifier 0x2e1ae160. Command (m for help): Building a new DOS disklabel with disk identifier 0x8e36dee5. Command (m for help): Partition type: p primary (0 primary, 0 extended, 4 free) e extended Select (default p): Partition number (1-4, default 1): First sector (2048-20479, default 2048): Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-20479, default 20479): Using default value 20479 Partition 1 of type Linux and of size 9 MiB is set Command (m for help): Selected partition 1 Hex code (type L to list all codes): Changed type of partition 'Linux' to 'Linux LVM' Command (m for help): Disk /dev/nullb0: 10 MB, 10485760 bytes, 20480 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x8e36dee5 Device Boot Start End Blocks Id System /dev/nullb0p1 2048 20479 9216 8e Linux LVM Command (m for help): The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. + sleep 1 + partprobe + sleep 1 + pvcreate /dev/nullb0p1 Physical volume "/dev/nullb0p1" successfully created. + sleep 1 + for i in 0 1 + NULLB_DIR=config/nullb/nullb1 + mkdir config/nullb/nullb1 + tree config/nullb/nullb1 config/nullb/nullb1 ├── badblocks ├── blocking ├── blocksize ├── cache_size ├── completion_nsec ├── discard ├── home_node ├── hw_queue_depth ├── index ├── irqmode ├── max_sectors ├── mbps ├── memory_backed ├── power ├── queue_mode ├── size ├── submit_queues ├── use_per_node_hctx ├── verify ├── zone_capacity ├── zoned ├── zone_max_active ├── zone_max_open ├── zone_nr_conv └── zone_size 0 directories, 25 files + sleep 1 + echo 1 + echo 512 + echo 10 + echo 1 + echo 1 ++ cat config/nullb/nullb1/index + IDX=1 + sleep 1 + sed -e 's/\s*\([\+0-9a-zA-Z]*\).*/\1/' + fdisk /dev/nullb1 Welcome to fdisk (util-linux 2.23.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Device does not contain a recognized partition table Building a new DOS disklabel with disk identifier 0x3bd84b2f. Command (m for help): Building a new DOS disklabel with disk identifier 0x0a6925a3. Command (m for help): Partition type: p primary (0 primary, 0 extended, 4 free) e extended Select (default p): Partition number (1-4, default 1): First sector (2048-20479, default 2048): Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-20479, default 20479): Using default value 20479 Partition 1 of type Linux and of size 9 MiB is set Command (m for help): Selected partition 1 Hex code (type L to list all codes): Changed type of partition 'Linux' to 'Linux LVM' Command (m for help): Disk /dev/nullb1: 10 MB, 10485760 bytes, 20480 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x0a6925a3 Device Boot Start End Blocks Id System /dev/nullb1p1 2048 20479 9216 8e Linux LVM Command (m for help): The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. + sleep 1 + partprobe + sleep 1 + pvcreate /dev/nullb1p1 Physical volume "/dev/nullb1p1" successfully created. + sleep 1 + vgcreate nullbvg /dev/nullb0p1 /dev/nullb1p1 Volume group "nullbvg" successfully created + lvcreate -l 4 -n nullblv nullbvg Logical volume "nullblv" created. + sleep 1 + dmesg -c [ 120.577643] null_blk: module loaded [ 123.061186] nullb0: p1 [ 125.213856] nullb0: p1 [ 130.441883] nullb1: p1 [ 132.628551] nullb1: p1 [ 132.636132] nullb0: p1 [ 134.858680] REQ_OP_VERIFY configured success for linear id 1 [ 134.858686] REQ_OP_VERIFY configured success for linear id 2 [ 134.859300] dm-5: detected capacity change from 32768 to 0 [ 134.859333] REQ_OP_VERIFY configured success for linear id 1 [ 134.859335] REQ_OP_VERIFY configured success for linear id 2 # ll /dev/dm-5 brw-------. 1 root root 253, 5 Feb 4 20:58 /dev/dm-5 # lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT nvme0n1 259:0 0 1G 0 disk nullb1 252:1 0 10M 0 disk └─nullb1p1 259:2 0 9M 0 part └─nullbvg-nullblv 253:5 0 16M 0 lvm nullb0 252:0 0 10M 0 disk └─nullb0p1 259:1 0 9M 0 part └─nullbvg-nullblv 253:5 0 16M 0 lvm # ls /dev/mapper/nullbvg-nullblv /dev/mapper/nullbvg-nullblv # dmsetup info /dev/dm-5 Name: nullbvg-nullblv State: ACTIVE Read Ahead: 8192 Tables present: LIVE Open count: 0 Event number: 0 Major, minor: 253, 5 Number of targets: 2 UUID: LVM-mLiPnf25we1YKmZ6MMH3ruL7lThYYuuZRzOOYup42smajuTyV3T1ZAMhHZ7x4e6G # insmod host/test.ko nblk=16 dev_path="/dev/dm-5" # dmesg -c [ 132.965714] TEST: REQ_OP_VERIFY sector 0 nr_sect 2048 [ 132.965740] is_abnormal_io 1512 [ 132.965763] dmrg: REQ_OP_VERIFY sect 2048 nr_sect 2048 nullb0 insmod linear_map_bio [ 132.965831] null_blk: REQ_OP_VERIFY sect 4096 nr_sect 2048 kworker/61:1H [ 132.965936] ---------------------------------------------------------- [ 132.965940] TEST: REQ_OP_VERIFY sector 2048 nr_sect 2048 [ 132.965949] is_abnormal_io 1512 [ 132.965957] dmrg: REQ_OP_VERIFY sect 4096 nr_sect 2048 nullb0 insmod linear_map_bio [ 132.965987] null_blk: REQ_OP_VERIFY sect 6144 nr_sect 2048 kworker/61:1H [ 132.966058] ---------------------------------------------------------- [ 132.966062] TEST: REQ_OP_VERIFY sector 4096 nr_sect 2048 [ 132.966070] is_abnormal_io 1512 [ 132.966078] dmrg: REQ_OP_VERIFY sect 6144 nr_sect 2048 nullb0 insmod linear_map_bio [ 132.966107] null_blk: REQ_OP_VERIFY sect 8192 nr_sect 2048 kworker/61:1H [ 132.966176] ---------------------------------------------------------- [ 132.966180] TEST: REQ_OP_VERIFY sector 6144 nr_sect 2048 [ 132.966188] is_abnormal_io 1512 [ 132.966196] dmrg: REQ_OP_VERIFY sect 8192 nr_sect 2048 nullb0 insmod linear_map_bio [ 132.966224] null_blk: REQ_OP_VERIFY sect 10240 nr_sect 2048 kworker/61:1H [ 132.966293] ---------------------------------------------------------- [ 132.966297] TEST: REQ_OP_VERIFY sector 8192 nr_sect 2048 [ 132.966305] is_abnormal_io 1512 [ 132.966313] dmrg: REQ_OP_VERIFY sect 10240 nr_sect 2048 nullb0 insmod linear_map_bio [ 132.966340] null_blk: REQ_OP_VERIFY sect 12288 nr_sect 2048 kworker/61:1H [ 132.966408] ---------------------------------------------------------- [ 132.966412] TEST: REQ_OP_VERIFY sector 10240 nr_sect 2048 [ 132.966420] is_abnormal_io 1512 [ 132.966428] dmrg: REQ_OP_VERIFY sect 12288 nr_sect 2048 nullb0 insmod linear_map_bio [ 132.966454] null_blk: REQ_OP_VERIFY sect 14336 nr_sect 2048 kworker/61:1H [ 132.966574] ---------------------------------------------------------- [ 132.966578] TEST: REQ_OP_VERIFY sector 12288 nr_sect 2048 [ 132.966587] is_abnormal_io 1512 [ 132.966595] dmrg: REQ_OP_VERIFY sect 14336 nr_sect 2048 nullb0 insmod linear_map_bio [ 132.966625] null_blk: REQ_OP_VERIFY sect 16384 nr_sect 2048 kworker/61:1H [ 132.966697] ---------------------------------------------------------- [ 132.966701] TEST: REQ_OP_VERIFY sector 14336 nr_sect 2048 [ 132.966709] is_abnormal_io 1512 [ 132.966717] dmrg: REQ_OP_VERIFY sect 16384 nr_sect 2048 nullb0 insmod linear_map_bio [ 132.966744] null_blk: REQ_OP_VERIFY sect 18432 nr_sect 2048 kworker/61:1H [ 132.966813] ---------------------------------------------------------- [ 132.966817] TEST: REQ_OP_VERIFY sector 16384 nr_sect 2048 [ 132.966825] is_abnormal_io 1512 [ 132.966834] dmrg: REQ_OP_VERIFY sect 2048 nr_sect 2048 nullb1 insmod linear_map_bio [ 132.966869] null_blk: REQ_OP_VERIFY sect 4096 nr_sect 2048 kworker/61:1H [ 132.966938] ---------------------------------------------------------- [ 132.966942] TEST: REQ_OP_VERIFY sector 18432 nr_sect 2048 [ 132.966950] is_abnormal_io 1512 [ 132.966958] dmrg: REQ_OP_VERIFY sect 4096 nr_sect 2048 nullb1 insmod linear_map_bio [ 132.966985] null_blk: REQ_OP_VERIFY sect 6144 nr_sect 2048 kworker/61:1H [ 132.967053] ---------------------------------------------------------- [ 132.967057] TEST: REQ_OP_VERIFY sector 20480 nr_sect 2048 [ 132.967065] is_abnormal_io 1512 [ 132.967073] dmrg: REQ_OP_VERIFY sect 6144 nr_sect 2048 nullb1 insmod linear_map_bio [ 132.967100] null_blk: REQ_OP_VERIFY sect 8192 nr_sect 2048 kworker/61:1H [ 132.967169] ---------------------------------------------------------- [ 132.967174] TEST: REQ_OP_VERIFY sector 22528 nr_sect 2048 [ 132.967181] is_abnormal_io 1512 [ 132.967188] dmrg: REQ_OP_VERIFY sect 8192 nr_sect 2048 nullb1 insmod linear_map_bio [ 132.967206] null_blk: REQ_OP_VERIFY sect 10240 nr_sect 2048 kworker/61:1H [ 132.967251] ---------------------------------------------------------- [ 132.967254] TEST: REQ_OP_VERIFY sector 24576 nr_sect 2048 [ 132.967259] is_abnormal_io 1512 [ 132.967264] dmrg: REQ_OP_VERIFY sect 10240 nr_sect 2048 nullb1 insmod linear_map_bio [ 132.967281] null_blk: REQ_OP_VERIFY sect 12288 nr_sect 2048 kworker/61:1H [ 132.967326] ---------------------------------------------------------- [ 132.967329] TEST: REQ_OP_VERIFY sector 26624 nr_sect 2048 [ 132.967335] is_abnormal_io 1512 [ 132.967340] dmrg: REQ_OP_VERIFY sect 12288 nr_sect 2048 nullb1 insmod linear_map_bio [ 132.967360] null_blk: REQ_OP_VERIFY sect 14336 nr_sect 2048 kworker/61:1H [ 132.967404] ---------------------------------------------------------- [ 132.967409] TEST: REQ_OP_VERIFY sector 28672 nr_sect 2048 [ 132.967413] is_abnormal_io 1512 [ 132.967417] dmrg: REQ_OP_VERIFY sect 14336 nr_sect 2048 nullb1 insmod linear_map_bio [ 132.967431] null_blk: REQ_OP_VERIFY sect 16384 nr_sect 2048 kworker/61:1H [ 132.967468] ---------------------------------------------------------- [ 132.967470] TEST: REQ_OP_VERIFY sector 30720 nr_sect 2048 [ 132.967477] is_abnormal_io 1512 [ 132.967482] dmrg: REQ_OP_VERIFY sect 16384 nr_sect 2048 nullb1 insmod linear_map_bio [ 132.967496] null_blk: REQ_OP_VERIFY sect 18432 nr_sect 2048 kworker/61:1H [ 132.967567] ---------------------------------------------------------- -- 2.22.1
