The BUG message "BUG: using smp_processor_id() in preemptible [00000000]
code" was observed for TCMU devices with kernel config DEBUG_PREEMPT.
The message was observed when blktests block/005 was run on TCMU devices
with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7
("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered
the symptom. The commit modified work queue to handle commands and
changed 'current->nr_cpu_allowed' at smp_processor_id() call.
The message was also observed at system shutdown when TCMU devices were
not cleaned up [2]. The function smp_processor_id() was called in SCSI
host work queue for abort handling, and triggered the BUG message. This
symptom was observed regardless of the commit 1130b499b4a7 ("scsi:
target: tcm_loop: Use LIO wq cmd submission helper").
To avoid the preemptible code check at smp_processor_id(), get CPU ID
with raw_smp_processor_id() instead. The CPU ID is used for performance
improvement then thread move to other CPU will not affect the code.
[1]
[ 56.468103] run blktests block/005 at 2021-05-12 14:16:38
[ 57.369473] check_preemption_disabled: 85 callbacks suppressed
[ 57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511
[ 57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510
[ 57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506
[ 57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34
[ 57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[ 57.369617] Call Trace:
[ 57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507
[ 57.369628] dump_stack+0x6d/0x89
[ 57.369642] check_preemption_disabled+0xc8/0xd0
[ 57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.369655] __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.369695] target_init_cmd+0x76/0x90 [target_core_mod]
[ 57.369732] tcm_loop_queuecommand+0x109/0x210 [tcm_loop]
[ 57.369744] scsi_queue_rq+0x38e/0xc40
[ 57.369761] __blk_mq_try_issue_directly+0x109/0x1c0
[ 57.369779] blk_mq_try_issue_directly+0x43/0x90
[ 57.369790] blk_mq_submit_bio+0x4e5/0x5d0
[ 57.369812] submit_bio_noacct+0x46e/0x4e0
[ 57.369830] __blkdev_direct_IO_simple+0x1a3/0x2d0
[ 57.369859] ? set_init_blocksize.isra.0+0x60/0x60
[ 57.369880] generic_file_read_iter+0x89/0x160
[ 57.369898] blkdev_read_iter+0x44/0x60
[ 57.369906] new_sync_read+0x102/0x170
[ 57.369929] vfs_read+0xd4/0x160
[ 57.369941] __x64_sys_pread64+0x6e/0xa0
[ 57.369946] ? lockdep_hardirqs_on+0x79/0x100
[ 57.369958] do_syscall_64+0x3a/0x70
[ 57.369965] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 57.369973] RIP: 0033:0x7f7ed4c1399f
[ 57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b
[ 57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011
[ 57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f
[ 57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009
[ 57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001
[ 57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70
[ 57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568
[ 57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34
[ 57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[ 57.370039] Call Trace:
[ 57.370045] dump_stack+0x6d/0x89
[ 57.370056] check_preemption_disabled+0xc8/0xd0
[ 57.370068] __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.370121] target_init_cmd+0x76/0x90 [target_core_mod]
[ 57.370178] tcm_loop_queuecommand+0x109/0x210 [tcm_loop]
[ 57.370197] scsi_queue_rq+0x38e/0xc40
[ 57.370224] __blk_mq_try_issue_directly+0x109/0x1c0
...
[2]
[ 117.458597] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u16:8
[ 117.467279] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[ 117.473893] CPU: 1 PID: 418 Comm: kworker/u16:6 Not tainted 5.13.0-rc1+ #34
[ 117.481150] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 8
[ 117.481153] Workqueue: scsi_tmf_7 scmd_eh_abort_handler
[ 117.481156] Call Trace:
[ 117.481158] dump_stack+0x6d/0x89
[ 117.481162] check_preemption_disabled+0xc8/0xd0
[ 117.512575] target_submit_tmr+0x41/0x150 [target_core_mod]
[ 117.519705] tcm_loop_issue_tmr+0xa7/0x100 [tcm_loop]
[ 117.524913] tcm_loop_abort_task+0x43/0x60 [tcm_loop]
[ 117.530137] scmd_eh_abort_handler+0x7b/0x230
[ 117.534681] process_one_work+0x268/0x580
[ 117.538862] worker_thread+0x55/0x3b0
[ 117.542652] ? process_one_work+0x580/0x580
[ 117.548351] kthread+0x143/0x160
[ 117.551675] ? kthread_create_worker_on_cpu+0x40/0x40
[ 117.556873] ret_from_fork+0x1f/0x30
Fixes: 1526d9f10c61 ("scsi: target: Make state_list per CPU")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v5.11+
---
Changes from v1:
* Used raw_smp_processor_id() instead of get_cpu() and put_cpu()
drivers/target/target_core_transport.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 8fbfe75c5744..05d7ffd59df6 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1416,7 +1416,7 @@ void __target_init_cmd(
cmd->orig_fe_lun = unpacked_lun;
if (!(cmd->se_cmd_flags & SCF_USE_CPUID))
- cmd->cpuid = smp_processor_id();
+ cmd->cpuid = raw_smp_processor_id();
cmd->state_active = false;
}
--
2.31.1
