Re: [PATCH] scsi: qla2xxx: Keep initiator ports after RSCN

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2020-05-19 at 02:22 +0300, Roman Bolshakov wrote:
> On Mon, May 18, 2020 at 09:31:42PM +0300, Roman Bolshakov wrote:
> > 
> 
> P.S. A little bit cleaner alternative would be to avoid session
> deletion
> only if scan needed is set (that allows session deletion of initiator
> ports after fabric discovery if N_Port ID change happened). Please
> let
> me know if I should submit v2 like this:
> 
> diff --git a/drivers/scsi/qla2xxx/qla_gs.c
> b/drivers/scsi/qla2xxx/qla_gs.c
> index 42c3ad27f1cb..b9955af5cffe 100644
> --- a/drivers/scsi/qla2xxx/qla_gs.c
> +++ b/drivers/scsi/qla2xxx/qla_gs.c
> @@ -3495,8 +3495,10 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t
> *vha, srb_t *sp)
>  			if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) {
>  				qla2x00_clear_loop_id(fcport);
>  				fcport->flags |= FCF_FABRIC_DEVICE;
> -			} else if (fcport->d_id.b24 != rp->id.b24 ||
> -				fcport->scan_needed) {
> +			} else if (fcport->d_id.b24 != rp->id.b24 ||
> +				   (fcport->scan_needed &&
> +				    fcport->port_type != FCT_INITIATOR
> &&
> +				    fcport->port_type !=
> FCT_NVME_INITIATOR)) {
>  				qlt_schedule_sess_for_deletion(fcport);
>  			}
>  			fcport->d_id.b24 = rp->id.b24;


Yes, this looks like an improvement to me. To express it in my own
words (as the logic is subtle): wrt the original code, this only
changes the behavior if the NPort ID is unchanged but "scan_needed" is
set - in this case the session used to be deleted, but with this patch
it isn't any more.

Thanks,
Martin





[Index of Archives]     [Linux SCSI]     [Kernel Newbies]     [Linux SCSI Target Infrastructure]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Device Mapper]

  Powered by Linux