This patch avoids that building with W=1 triggers compiler
warnings similar to the following:
drivers/scsi/qla2xxx/qla_nx2.h:538:23: warning: ‘qla8044_reg_tbl’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
Cc: Quinn Tran <quinn.tran@xxxxxxxxxx>
Cc: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
---
drivers/scsi/qla2xxx/qla_nx.c | 5 +++++
drivers/scsi/qla2xxx/qla_nx.h | 3 +--
drivers/scsi/qla2xxx/qla_nx2.c | 17 +++++++++++++++++
drivers/scsi/qla2xxx/qla_nx2.h | 17 -----------------
4 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 54380b434b30..0a1723cc08cf 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -42,6 +42,11 @@ static int qla82xx_crb_table_initialized;
(crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \
QLA82XX_HW_CRB_HUB_AGT_ADR_##name << 20)
+const int MD_MIU_TEST_AGT_RDDATA[] = {
+ 0x410000A8, 0x410000AC,
+ 0x410000B8, 0x410000BC
+};
+
static void qla82xx_crb_addr_transform_setup(void)
{
qla82xx_crb_addr_transform(XDMA);
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 6201dce3553b..77624eac95a4 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -1176,8 +1176,7 @@ struct qla82xx_md_entry_queue {
#define MD_MIU_TEST_AGT_ADDR_LO 0x41000094
#define MD_MIU_TEST_AGT_ADDR_HI 0x41000098
-static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC,
- 0x410000B8, 0x410000BC };
+extern const int MD_MIU_TEST_AGT_RDDATA[4];
#define CRB_NIU_XG_PAUSE_CTL_P0 0x1
#define CRB_NIU_XG_PAUSE_CTL_P1 0x8
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index 007192d7bad8..dc1ec9b61027 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -15,6 +15,23 @@
#define TIMEOUT_100_MS 100
+static const uint32_t qla8044_reg_tbl[] = {
+ QLA8044_PEG_HALT_STATUS1,
+ QLA8044_PEG_HALT_STATUS2,
+ QLA8044_PEG_ALIVE_COUNTER,
+ QLA8044_CRB_DRV_ACTIVE,
+ QLA8044_CRB_DEV_STATE,
+ QLA8044_CRB_DRV_STATE,
+ QLA8044_CRB_DRV_SCRATCH,
+ QLA8044_CRB_DEV_PART_INFO1,
+ QLA8044_CRB_IDC_VER_MAJOR,
+ QLA8044_FW_VER_MAJOR,
+ QLA8044_FW_VER_MINOR,
+ QLA8044_FW_VER_SUB,
+ QLA8044_CMDPEG_STATE,
+ QLA8044_ASIC_TEMP,
+};
+
/* 8044 Flash Read/Write functions */
uint32_t
qla8044_rd_reg(struct qla_hw_data *ha, ulong addr)
diff --git a/drivers/scsi/qla2xxx/qla_nx2.h b/drivers/scsi/qla2xxx/qla_nx2.h
index 02fe3c4cdf55..83c1b7e17c80 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.h
+++ b/drivers/scsi/qla2xxx/qla_nx2.h
@@ -535,23 +535,6 @@ enum qla_regs {
#define CRB_CMDPEG_CHECK_RETRY_COUNT 60
#define CRB_CMDPEG_CHECK_DELAY 500
-static const uint32_t qla8044_reg_tbl[] = {
- QLA8044_PEG_HALT_STATUS1,
- QLA8044_PEG_HALT_STATUS2,
- QLA8044_PEG_ALIVE_COUNTER,
- QLA8044_CRB_DRV_ACTIVE,
- QLA8044_CRB_DEV_STATE,
- QLA8044_CRB_DRV_STATE,
- QLA8044_CRB_DRV_SCRATCH,
- QLA8044_CRB_DEV_PART_INFO1,
- QLA8044_CRB_IDC_VER_MAJOR,
- QLA8044_FW_VER_MAJOR,
- QLA8044_FW_VER_MINOR,
- QLA8044_FW_VER_SUB,
- QLA8044_CMDPEG_STATE,
- QLA8044_ASIC_TEMP,
-};
-
/* MiniDump Structures */
/* Driver_code is for driver to write some info about the entry
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
