On Fri, Mar 11, 2016 at 02:39:16PM -0800, Bart Van Assche wrote: > The above is fine with me. But when I ran a test with rdma_rw_use_mr() > changed into "return true" the following error messages appeared in the > kernel log: > > [ 364.460709] ib_srpt 0x1: parsing SRP descriptor table failed. > [ 383.604809] ib_srpt 0x0: parsing SRP descriptor table failed. > [ 383.605627] ib_srpt 0x2: parsing SRP descriptor table failed. > [ 386.702905] ib_srpt 0x3: parsing SRP descriptor table failed. > [ 386.703092] ib_srpt 0x4: parsing SRP descriptor table failed. > [ 386.703242] ib_srpt 0x5: parsing SRP descriptor table failed. > [ 386.703411] ib_srpt 0x6: parsing SRP descriptor table failed. > > Is this expected? I ran this test on a server equipped with two mlx4 HCAs > with latest firmware (2.36.5000). I installed git commit > c4c65482b56a433a82bc5b63db8ba125727e9f80 of the rdma-rw-api merged with > v4.5-rc7. Initiator and target drivers were running on the same server and > were communicating with each other via loopback. Before I modified > rdma_rw_use_mr() the same test passed on the same setup. I think this might be the case when SRP gets multiple SGL entries. In this case the number of MRs allocated is limited and srpt should handle rdma_rw_ctx_init failures due to the lack of MRs. If you add the ib_mr_pool_get failure printk back that you asked me to remove I bet it's going to trigger. -- To unsubscribe from this list: send the line "unsubscribe target-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
