On Tue, 2015-04-07 at 20:41 -0400, Dan Lane wrote: > Initiators are the same as the crashy storage, QLA2462. Here's what > lspci shows for them if it helps: > > 0d:01.0 Fibre Channel: QLogic Corp. ISP2422-based 4Gb Fibre Channel to > PCI-X HBA (rev 02) > 0d:01.1 Fibre Channel: QLogic Corp. ISP2422-based 4Gb Fibre Channel to > PCI-X HBA (rev 02) > > I will work on getting storage presented from one of the problematic > systems with the emulate_caw=0 setting, can you be more specific on > where this should be set? emulate_caw is a backend device attribute. It can be changed for each backend device within the configuration file before restarting the target service, or in /backstores/iblock/$DEVICE using targetcli. Note that this will need to happen before the ESX FC initiator connects, and performs the LUN SCAN to query if COMPARE_AND_WRITE is supported or not. --nab -- To unsubscribe from this list: send the line "unsubscribe target-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
