On Wed, 2012-09-05 at 19:54 +0000, Reggie Fields wrote: > Hello, > I've ran into this same issue when trying to create a qlogic target. Does > anyone know if this issue has been solved? I'm using the exact same version of > rtslib and targetcli. I've also successfully created an iSCSI target > successfully. I'm running with a 3.6.0-rc1 kernel. > Hi Reggie, By default the upstream qla2xxx driver is set to run in initiator mode only. To enable target mode + use tcm_qla2xxx.ko you'll need to enable it via an module parameter named qlini_mode. Here is what a typical /etc/modprobe.d/qla2xxx.conf looks like with target mode enabled: options qla2xxx qlini_mode="disabled" Based upon your distribution the module parameter setup might be slightly different, but you just need to make sure that initrd/initramfs is honoring these extra qla2xxx parameters. --nab -- To unsubscribe from this list: send the line "unsubscribe target-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
