Hi,
I'm a nube at iscsi target, and scsi tape for that matter.
I'm trying to get an iscsi-tape target to function.
The iscsi target I'm looking at setting this up on is F17.
I have tried using scsi-target-utils/tgtd with limited success.
So far, not able to do anything beyond 'mt -f /dev/st0 status'
which shows:
# mt -f /dev/st0 status
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x0 (default).
Soft error count since last status=0
General status bits on (41010000):
BOT ONLINE IM_REP_EN
On the target:
# tgtadm --lld iscsi --op show --mode target
Target 1: iqn.st:tape:sttarget
System information:
Driver: iscsi
State: ready
I_T nexus information:
I_T nexus: 1
Initiator: iqn.1994-05.com.redhat:c6c58372e6f4
Connection: 0
IP Address: xx.xx.xx.xxx
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
Backing store type: null
Backing store path: None
Backing store flags:
LUN: 1
Type: tape
SCSI ID: IET 00010001
SCSI SN: beaf11
Size: 1000 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
Backing store type: ssc
Backing store path: /dev/loop0
Backing store flags:
LUN: 2
Type: tape
SCSI ID: IET 00010002
SCSI SN: beaf12
Size: 1000 MB, Block size: 1
Online: Yes
Removable media: Yes
Prevent removal: No
Readonly: No
Backing store type: ssc
Backing store path: /dev/loop1
Backing store flags:
Account information:
ACL information:
ALL
#
Is there a better way to setup iscsi tapes, or can
someone point out what I might be doing wrong?
Thanks, Rob
--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
